IC695CRU320CA-EL
¥3,252.00Product parameters (s)
– model: ic695cru320ca – elmodule
– communication protocol: Ethernet
– input voltage: 24v dc
– operating temperature range: -40 c – 85 c
– dimensions: 100 mm x 50 mm x 30 mm
IS420ESWBH3A
¥3,262.00 Specifications and parameters :
The GE IS420ESWBH3A is an industrial Ethernet switch designed to meet the needs of real-time industrial control solutions
It has 16 copper ports and supports 10/100Base-TX, but some sources point to 8 ports, which may vary by model or configuration.
The switch is compatible with the 802.3u, 802.3U and 802.3x standards and has automatic negotiation function
Provides full/half-duplex auto-negotiation, minimum 256KB buffer, and 4K MAC address
Weight :
Regarding the specific weight of the GE IS420ESWBH3A, one source states that it weighs about 0.5 kg, while another source mentions that it weighs about 6.5kg
VME-7807RC VME-7807RC-410000 350-930078074-410000 G
¥3,252.00Product parameters:
– model: vme-7807rc-410000
– operating temperature: -40 c to +85 c
Processor: Intel core tm i7
– memory: up to 16 gb ddr3 sdram
– storage: sata and compactflash Settings
– interfaces: Ethernet, usb
VMIVME-1128
¥3,262.00** technical specifications :**
– analog inputs: 16 differential channels, 16-bit resolution
– analog outputs: 8 differential channels, 16-bit resolution
– digital I/o: 32 lines, TTL/ cmos compatible
– communication interfaces: rs-232, rs-485
– operating temperature: 0 c to +55 c
– dimensions: 233mm x 160mm
VMIVME-2510B
¥3,625.00** product parameters :**
– type of bus: vmebus
– interface: master /slave
– data transfer rate: up to 40 MB/s
– operating temperature: 0 c to 70 c
– power requirements: + 5v, + 12v
VMIVME-2536
¥3,526.00Product name: ge vmivme – 2536module
Product description: this module is designed for data collection and application management in industrial automation and measurement.
Product parameters:
– input channels: 36
– analog input resolution: 16 bit
– maximum sampling rate: 500 cop/s
– interface: vmebus
IS220PDOAH1A
¥3,625.00 Specifications and parameters :
compatible terminal boards : Compatible with six discrete output terminal boards, including SRLY and TRLY
connector : has one DC connector and two RJ45 connectors
Memory type : contains flash memory and RAM
Number of Ethernet ports : 2
Number of leds : four, respectively for power, attention, TxRx and link indication
Power management : Supports 28V input
Number of trunk channels : 12
IS420UCSBH4A
¥3,625.00 function :
The IS420UCSBH4A is a high-performance UCSB controller module commonly used in industrial automation equipment and systems such as gas turbine control systems. It is responsible for executing control logic, receiving sensor signals, sending control commands, and communicating with I/O modules to achieve equipment control, data acquisition and communication functions
Specifications and parameters :
Input voltage range : 12-48VDC
Output voltage : 5VDC, maximum output current 10A
microprocessor : uses 1066MHz Intel EP80579 microprocessor, with 600MHz processing capacity
Memory : 256 MB DDR2 SDRAM
operating system : QNX Neutrino, a real-time multitasking operating system developed for industrial applications that require extreme speed and reliability
SR469-P5-HI-A1-E
¥3,625.00 Specifications :
The GE SR469-P5-HI-A1-E is a motor management relay or protection device specifically designed to manage equipment with greater horsepower
It has an enhanced display function, equipped with a display with a larger LCD, so that users can easily view equipment status, parameter Settings and fault information
Weight :
Specific weight information varies from source to source, with some mentioning a weight of 1.2kg
IS215UCVFH2BB VMIVME-7650-83H 350-007650-83H C
¥4,120.00** product description :**
Ge is215ucvfh2bb vmivme-7650-83h cmodule is a high-performance module designed for various industrial applications. It provides reliable and efficient work, which makes it suitable for difficult conditions.
** product parameters :**
– model number: is215ucvfh2bb
– part number: vmivme – 7650-83h
– compatibility: compatibility with vmivme -7650 series
– input voltage: 24v dc
– output voltage: 5v dc
– operating temperature: -40 c to 85 c
S710D-EST2
¥3,625.00** product description :**
Ge s710d-est2 is a high-performance module designed for efficient energy distribution and management. It is suitable for a variety of industrial applications and provides reliable and safe operation.
** product parameters :**
– input voltage: 120-240v
– output voltage: 24v
– power class: 100 w
– operating temperature: -40 c to 85 c
– dimensions: 10 cm x 5 cm x 2 cm
8610-FT-NA
¥3,655.00Description of the product
The ge 8610-ft na controller is a high-performance controller designed for industrial applications. It provides modern control and monitoring capabilities, making it suitable for a wide range of industries.
Product parameters (s)
– model: ge 8610-ft – na
– input voltage: 100-240v ac
– output voltage: 24v dc
– communication interface: Ethernet, modbus