Measurement Principle: Utilizes capacitive electrodes and thermal conductivity sensors for measuring moisture and hydrogen concentration in oil.
Measurement Range: Moisture (0-10,000 ppm) and Hydrogen (0-10,000 ppm).
Accuracy: ±10% or ±25 ppm.
Specifications:
Communication Interface: Supports RS485, RS232, and MODBUS.
Working Temperature Range: -40°C to 85°C.
Storage Temperature Range: -40°C to 85°C.
Humidity Range: 0-95% relative humidity (non-condensing).
Output Signal: Can be configured as 4-20 mA or MODBUS RS485.
Data Storage: Up to 10 years of historical data can be stored.
Model Number: GE IS200BPVCG1BR1.
Input Voltage Range: 12-48VDC.
Output Voltage Range: 5VDC.
Output Current: Maximum 10A.
Efficiency: Greater than 90%.
Operating Temperature Range: -20°C to +50°C.
Storage Temperature Range: -40°C to +70°C.
Humidity: 5% to 95% relative humidity (non-condensing).
Input Voltage Range: Typically, the input voltage range is from 12VDC to 48VDC.
Output Voltage: The output voltage is 5VDC.
Output Current: The maximum output current can be as high as 10A.
Efficiency: The efficiency of the module is greater than 90%.
Isolation Voltage: The isolation voltage is greater than 500Vrms.
Insulation Resistance: The insulation resistance is greater than 100MΩ.
Dimensions and Weight:
Dimensions: The dimensions of the module are 170mm x 105mm x 32mm.
Input Voltage: Typically, the IS230STAOH2A has an input voltage range of 24VDC to 48VDC. However, some sources also indicate a range of 12-48VDC.
Output Voltage: It provides an output voltage of 24VDC.
Output Current: The maximum output current is specified as 10A.
Power: The power rating is 240VDC.
Dimensions and Weight:
Dimensions: The module measures 100mm x 50mm x 20mm. Another source gives dimensions as 170mm x 105mm x 32mm. It’s worth noting that these dimensions may vary depending on the specific model or revision.
Input Voltage Range: The input voltage range for the GE IS200STAOH2AAA module is typically 12-48VDC.
Output Voltage: The module provides an output voltage of 5VDC.
Output Current (Maximum): The maximum output current is specified as 10A.
CPU: Equipped with a 32-bit RISC processor.
Dimensions and Weight:
Dimensions: The module measures 170mm x 105mm x 32mm.
Weight: The weight is approximately 120g or about 1.2kg depending on the source. It’s advisable to check with the manufacturer for the most accurate figure.
Input Voltage Range: Typically, the input voltage range is 12-48VDC.
Output Voltage: The output voltage is 5VDC.
Output Current (Maximum): The maximum output current can be up to 10A.
Efficiency: The efficiency of the module is greater than 90%.
Dimensions and Weight:
Dimensions: The module measures approximately 170mm x 105mm x 32mm.
Weight: The weight is approximately 120g.
DS200TCQAG1BHF-W01:
Dimensions: Specific dimensions for this module are not available in the provided references, but it’s likely to be similar to the DS200TCQAG1BHF model, which measures 170mm x 105mm x 32mm.
Weight: The weight of this module is not specifically mentioned, but it may be comparable to the DS200TCQAG1BHF, which is approximately 120g. However, another source lists the weight of a similar item as 0.57kg.
DS215TCQAG1BZZ01A:
Dimensions: No specific dimensions are given for this model in the references.
Weight: The weight is listed as 1.13kg, which is heavier than the DS200TCQAG1BHF.
Voltage: The DS200TCQCG1BKG is typically rated at 24V or 230V, depending on the source. It’s advisable to verify the voltage rating with the manufacturer or from official documentation.
Power: The module is designed for use in industrial automation and control systems, where it may require a certain level of power input and output.
Dimensions and Weight:
Dimensions: The module measures approximately 170mm x 105mm x 32mm.
Weight: The weight is reported as about 120g, 1.24kg, 0.2kg, or 0.56kg. This variance could be due to different models, versions, or measurement methods. It’s recommended to check with the manufacturer for the most accurate weight.
