Showing 2005–2016 of 3474 results
¥ 4,250.00
Processor: Based on ARM core, 32-bit for high-speed information acquisition and processing.
Memory: 32M high-capacity flash memory chip for ultra-long-time data storage.
Input Signals: Standard current, standard voltage, thermocouple, thermal resistance, and others.
Output Frequency: 100kHz (Work voltage: 220V)
1
Specifications:
Display: 5.1-inch 240×128 dot matrix graphic LCD with LED backlight.
Channels: Simultaneous detection, recording, display, and alarm for up to 8-channel signals.
Communication: Standard serial communication interfaces, including RS485 and RS232.
Dimensions and Weight:
Dimensions: Height of 3 inches, length of 11.25 to 11.5 inches (depending on source).
2
3
Weight: Specific weight not directly mentioned, but comparable to similar industrial devices.
¥ 5,260.00
Output frequency: The adaptive frequency is 60Hz1.
Control object: Drive the fuel/steam valve 2 by controlling four electro-hydraulic servo valves.
Signal processing: provides pulse rate flow input, LVDT excitation, and LVDT position feedback2.
Specifications :
Size: 346*623mm1.
Weight: Approx. 0.1 kg .
Size :
As mentioned above, its physical dimensions are 346*623mm.
Weight :
About 0.1 kg.
¥ 4,158.00
GE 531X111PSHAWG3
Product Parameters:
Manufacturer: General Electric (GE)
Category: Circuit Breaker
Type: Molded Case Circuit Breaker (MCCB)
Rating: Likely to be a high-current rating based on the model number.
Specifications:
Current Rating: Specifies the maximum continuous current the circuit breaker can carry without tripping.
Interrupting Rating: The maximum short-circuit current the circuit breaker can safely interrupt.
Voltage Rating: The maximum voltage the circuit breaker is designed to handle.
Number of Poles: Number of current-carrying paths (e.g., single-pole, three-pole).
Trip Characteristic: How the circuit breaker responds to overcurrent conditions (e.g., inverse time, magnetic).
Operating Mechanism: Type of mechanism used to trip or close the circuit breaker (e.g., thermal-magnetic, electronic).
¥ 2,560.00
GE VMIVME7768 629.385546
Product Parameters:
Model Number: VMIVME7768
Manufacturer: General Electric (GE)
Series: VME
Part Number: 629.385546
Type: Motherboard or Processor Card
Specifications:
Processor Type: Likely to be an Intel-based processor, depending on the revision and version.
Bus Type: VMEbus
Memory Capacity: Depends on the configuration, but typically supports high-capacity RAM.
Expansion Slots: Offers slots for additional cards or modules.
I/O Interfaces: Multiple interfaces for input/output connections.
Operating Temperature Range: Industrial-grade temperatures, typically -40°C to +85°C.
MTBF (Mean Time Between Failures): High reliability with long MTBF ratings.
¥ 4,105.00
GE DS200TCQCG1BJG
Product parameters:
Type: ds200tcqcg1bjg
Manufacturer: general electric (ge)
Voltage: 220 v
Crane type: qcg1bjg
Type of device: temperature sensor
Technical characteristics of the vehicle:
Temperature range: -50 c to +150 c
Accuracy: + 1 c
Response time: < 500ms
Water resistance: ip65
¥ 6,530.00
GE DS200TCPSG1APE
Product parameters:
Type of device: temperature sensor
Temperature range: -50 c to +150 c (-58 f to +302 f)
Outputs: 2-wire RTD (resistance temperature detector)
Accuracy: + 0.5 degrees c (+ 0.9 degrees f)
Humidity range: 0%rh – 100%rh (non condensing)
Pressure range: standard industrial range (consult manufacturer for specific details)
Material: Stainless steel and other corrosion-resistant materials
**Mounting:**Threaded or flange mount options
Power Supply: 24VDC (standard, may vary by model)
Dimensions: Consult manufacturer for exact dimensions
¥ 4,620.00
The GE DS200TCPSG1APE is a temperature sensor specifically designed for use in industrial automation and control systems. Here are the product parameters, specifications, and application areas in English, in order:
Product Parameters and Specifications:
Sensor Type: Temperature Sensor
Measurement Range: Typically, this range is specified by the manufacturer and can vary depending on the specific model. It is essential to refer to the datasheet for accurate measurement range information.
Accuracy: Specifies the closeness of the measured temperature to the actual temperature. Accuracy is typically expressed in degrees Celsius or Fahrenheit.
Response Time: The time it takes for the sensor to reach a stable output after a change in temperature.
Operating Temperature Range: The range of temperatures within which the sensor can operate safely and accurately.
Output Signal: The type of signal generated by the sensor, such as analog (e.g., 4-20mA or 0-10V) or digital (e.g., RS485 or Modbus).
Power Requirements: The voltage and current required to operate the sensor.
Physical Dimensions: Length, width, height, and any other relevant dimensions of the sensor.
¥ 4,065.00
Ge ds200dcfbg1bgb proxy, proxy, proxy:
GE DS200DCFBG1BGB
Product parameters:
Nominal voltage: indicates a standard voltage at which the product can operate without damage.
Frequency: the frequency at which the product operates.
Power: the maximum power the product can produce.
Dimension dimensions: product dimensions including length, width and height.
Weight: product mass.
Technical characteristics of the vehicle:
Device type: description of the device type, e.g. diode, transistor, integrated circuit, etc.
¥ 3,024.00
Ge is220pturh1b is a product designed for various applications, including but not limited to industry, energy, transport and others. The main parameters and specifications of this product are presented below.
Product: ge is220pturh1b
Parameters and specifications:
Product type: sensor/transmitter
¥ 2,035.00
GE PCIE-5565RC-100000 is a PCIe (Peripheral Component Interconnect Express) adapter card from General Electric (GE) that likely supports high-speed data transmission and processing. This type of card is typically used in servers, data centers, or other high-performance computing environments.
Product Parameters:
Manufacturer: General Electric (GE)
Model: PCIE-5565RC-100000
Interface: PCIe (Peripheral Component Interconnect Express)
Speed: Likely supports PCIe Gen 3 or Gen 4, depending on the specific version, for high-speed data transfer.
Number of Ports: The number of ports can vary depending on the configuration. This could be a dual-port or quad-port card, for example.
Form Factor: Typically a low-profile or full-height PCIe card, depending on the server or system it is designed for.
Power Consumption: Specifies the amount of power the card requires to operate.
Compatibility: Supports specific server motherboards and operating systems.
¥ 4,258.00
GE VMIVME-7807 – Product Parameters, Specifications, and Application Areas
Product Parameters:
Manufacturer: General Electric (GE)
Model: VMIVME-7807
Type: VME (VMEbus) Module
Form Factor: Standard VME Size
Supported Processors: Depends on Configuration
Memory: Depends on Configuration (RAM and Flash)
I/O Ports: Depends on Configuration
Operating Temperature: Depends on Configuration and Specifications
Power Requirements: Depends on Configuration
Specifications:
Processor Compatibility: Supports a wide range of processors, depending on the specific configuration.
Memory Capacity: Configurable with various RAM and Flash memory options.
Expansion Slots: Provides expansion capabilities for additional cards or modules.
¥ 3,058.00
GE RS-FS-9001
Product parameters, specifications and scope
1. Parameters of tariscope 3.5.
Device type: rs-fs-9001 is most likely a device for protection against electrical energy failure (surge protector) from general electric (ge).
Rated voltage: indicates the standard voltage for which the device is intended.
Maximum voltage: indicates the maximum voltage the device can withstand.
Frequency: the frequency at which the device operates.
Protection functions: rs-fs-9001 is designed to protect against failures caused by external factors, such as atmospheric discharge.
2. Specifications and specifications
Maximum current: indicates the maximum current the device can withstand.
Response time: indicates the time during which the device will respond to an external failure.
Operating temperature range: indicates the temperature range in which the device can operate normally.
Compliance with standards: indicates that the device complies with certain international and/or national standards.
