Grid view List view

Showing 3481–3492 of 3716 results

GE IC693CPU374

¥5,629.00
The GE IC693CPU374 is a programmable controller (PLC) manufactured by General Electric (GE). The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Processor Type and speed: The controller has an embedded 586 processor with a processing speed of 133 MHz.
User memory: Total user memory is 240KB (245,760 bytes).
Scan rate: Typical scan rate is 0.15 ms per 1K Boolean contact logic.
Communication interface: With two 10/100baseT/TX Ethernet ports with automatic sensing function, support Ethernet communication, including TCP/IP protocol.
Protocol support: includes SNP and SNPX on the RS-485 port of the power supply, as well as built-in Ethernet communication protocols such as SRTP and Ethernet Global Data (EGD).
Size and weight:
Weight: Depending on the data, it may weigh 1.81 kg, 2KG or 3 kg.

GE IC693CPU350-BC

¥7,053.00
The GE IC693CPU350-BC is a programmable controller, specifically the GE Fanuc Series 90-30 series Central processing unit (CPU) module. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Output frequency: This parameter may vary depending on the specific configuration, but some models may have an output frequency set to 60Hz.
Operating temperature: The module’s operating temperature range is usually 0 to 60 degrees Celsius.
Current input: Some models may have 670 MA current input.
Processor speed: Some modules may have a processor speed of 25MHz.
Voltage input: Usually 5V DC.
Size and weight:
Dimensions: Specific data on dimensions may vary due to the existence of different data. Some sources indicate that their dimensions include 21mm * 65mm * 36mm, but others may provide different size information.

GE IC698CRE030

¥5,362.00
GE IC698CRE030 is a powerful programmable processor, the following is a detailed description of its parameters, specifications, size, weight, series, features and role:
Parameters and specifications:
Input current: 500mA.
Output voltage: 24VDC.
Output power: 360W.
Input voltage range: 85~264VAC.
User memory: 64MB.
Rated speed: 600 MHZ.
Size and weight:
Size: 10 x 7.6 x 1.2 inches, or IC698CRE030mm (may be a misentry, but should actually be the specific mm size).
Weight: About 1.2kg.

GE IC697CPM790

¥6,530.00
The GE IC697CPM790 is a 64 MHz CPU processor module manufactured by GE Fanuc and designed for industrial automation and control systems. The following are the detailed parameters, specifications, dimensions, weight, series, features and functions of the module:
Parameters and specifications:
Operating frequency: 64 MHz.
CPU type: 32-bit floating point processor.
Memory: 1 MB of battery backup memory with flash memory dedicated to operating system firmware.
Input/output: Discrete input and output up to 12K (mixed simplex mode only).
Programming software: Supports equipping and programming under Windows or MS-DOS.
Communication interface: Has a 15-pin type D connector, compatible with RS-485.
Size and weight:
Size: Specific size information is not given, but can be inferred based on the size of general industrial electronic equipment.

GE IC698CRE020

¥5,319.00
GE IC698CRE020 is an important industrial control equipment, especially as a central processor module plays a key role in industrial automation systems. The following is detailed information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Input/output voltage: 24V DC.
Input/output channels: 16.
Operating temperature: range from -20℃ to +60℃.
Storage temperature: range from -40℃ to +85℃.
Communication interface: Support RS232, RS485, Ethernet and other communication protocols.
Size and weight:
Size: approximately 180mm × 105mm × 75mm.
Weight: About 1.2kg.

GE IC698CRE010

¥6,341.00
Regarding the detailed parameters, specifications, dimensions, weight, series, characteristics and functions of GE IC698CRE010, we can give the following overview based on current knowledge:
Parameters and specifications:
Type: Integrated PLC LD instruction processor module.
Working voltage: 3620V.
Output frequency: 1800Hz.
Processing speed: 1470μs.
I/O count: 2512.
Series:
The GE IC698CRE010 belongs to GE’s family of PLC modules, particularly those related to industrial automation and control systems.

GE IC695CRU320

¥5,430.00
The GE IC695CRU320 is a solid-state automation computer designed and built by GE Fanuc for application logic control of the PACSystems RX3i platform. The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
CPU performance: IC695CRU320 is a high-performance CPU module with powerful processing power, which can efficiently perform control logic and arithmetic tasks.
Memory: The module supports up to 64 MB of battery-supported memory, while containing 64 MB of non-volatile flash user memory.
Communication interface: The IC695CRU320 has two serial communication ports, namely an RS-232 port and an RS-485 port, allowing effective connection and communication with other devices and systems.
Time clock accuracy: The module’s clock has a maximum shift of 2 seconds per day, and the runtime clock (internal timing) has a maximum accuracy of 0.01%.
Blocks and Support protocols: This module supports up to 512 blocks, each with a maximum size of 128KB. It also supports a variety of serial protocols, such as Modbus RTU slave, SNP, etc.

GE IC695CPE330

¥4,032.00
The GE IC695CPE330 is a high-performance, highly reliable central processing unit (CPU) module from General Electric (GE). The following is a detailed introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
User memory: 64MB.
I/O specifications: 32k bit discrete I/O and 32k word analog I/O.
Ethernet ports: Three 10/100/1000Mbps ports, two of which are switched ports.
Processor speed: 1 GHz.
Communication protocols: Support SRTP client/server, Modbus TCP/IP, OPC UA, EGD, PROFINET, DNP3 power station, IEC-61850 client, IEC-104 server and other protocols.
Size and weight:
Dimensions: 170mm x 125mm x 166mm.

GE IC698CPE030

¥6,358.00
The GE IC698CPE030 is a Programmable automation controller (PAC) CPU that is widely used in industrial automation and control systems. The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Processor: The controller uses a 600MHz Pentium-M microprocessor to provide powerful processing power.
Memory: With 64MB of user memory and 64MB of user flash memory, ensuring sufficient data storage and processing power.
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O.
Communication interface: Supports two Ethernet communication ports, one RS232 port, one RS485 port, and one station manager port, providing options for a wide range of communication and connectivity.
Supported protocols: Ethernet supports SRTP, Modbus TCP server and client, Ethernet Global Data (EGD), serial protocols including Modbus RTU slave station, SNP, serial I/O and so on.
Maximum number of program blocks: 512 program blocks can be downloaded, each of which can have up to 128KB of memory.
Size and weight:
Size: There are two size descriptions, one is 170mm x 105mm x 32mm and the other is 7.5 x 8.6 x 1.5 inches. Please note that the dimensions from different sources may vary depending on the measurement method or unit.
Weight: According to some sources, it weighs 1kg. However, there are others that describe it as 2.1 pounds. This may be a difference between versions or measurement methods.

GE IC670MDL730K

¥5,368.00
The GE IC670MDL730K is a module from General Electric that is commonly used in industrial automation and control systems. The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
User input voltage: 18-30 V DC, nominal 24 V DC.
Output voltage range: 17.5-29.5 V DC.
Number of outputs: 8 output points.
Short-circuit response current: has a 20 amp short-circuit response current lasting 100 microseconds.
Size:
Length: 140mm.
Width: 122mm.
Height: 50mm.
Weight: Specific weight information is not explicitly given in the search results, you may need to consult the product manual or contact the supplier for exact data.

GE UR6AV

¥6,348.00
The following is detailed information about the parameters, specifications, dimensions, weight, series, features and functions of the GE UR6AV:
Parameters and specifications:
Input voltage: three-phase (three-phase four-wire) 380v.
Output voltage: three-phase 0-430v.
Operating frequency: 50Hz/60Hz.
Efficiency: >90%.
Waveform distortion: No additional distortion.
Temperature rise: <60℃.
Electrical strength: 2000V/min.
Insulation resistance: three-phase >2MΩ.

GE UR6AH

¥6,135.00
The GE UR6AH is a digital input module or I/O module for industrial automation and control systems. The following are the detailed parameters, specifications, dimensions, weight, series, features and functions of GE UR6AH:
Parameters and specifications:
Load capacity: 6 kg.
Working radius: 891 mm.
Number of joints: 6.
Repeated positioning accuracy: ±0.02 mm.
Power supply voltage: 200-240 VAC, 50/60 Hz.
Maximum power consumption: 1.6 kW.
Digital input: 6 channels, photoelectric isolation.
Logic level: 24V DC.
Input impedance: 470kΩ.
Digital output: 6, relay output.
Contact capacity: 250V AC/DC, 10A.
Output delay: <2 ms.
Communication interface: RS-232.