Memory: 64 MB user memory and 64 MB user flash memory
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O
Communication ports: Two Ethernet communication ports, one RS232 port, one RS485 port, and one station manager port
Response time: 200ms (for some specific operations, such as analog input/output)
Accuracy: +/ -0.10% F.S. (for analog input/output)
specification
Processing power: Powerful processing power, able to handle complex control logic and data processing tasks
Storage capacity: Contains memory modules for storing programs and data to support the running of the application
Communication capability: Supports a variety of communication interfaces, including Ethernet, serial ports, etc., which can be used to communicate with other devices and systems
argument
Processor: The controller is equipped with a 1 GHz CPU and uses an Intel Celeron-M microprocessor.
Memory: 64 MB of non-volatile flash memory and 64 MB of battery-operated random access memory (RAM).
Power requirements: +3.3 volts DC 1.0 amp nominal value, +5 volts DC 1.2 amp nominal value.
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), but in some sources it is mentioned that the operating temperature range may be wider, such as -40 ° C to 85 ° C.
specification
Processing speed: 1 GHZ.
Floating-point arithmetic: Supported.
Time clock accuracy: Maximum drift of 2 seconds per day.
Embedded communication: Support for RS-232, RS-485 (RS-486 in some sources).
Supported serial protocols: Modbus RTU slave, SNP, Serial I/O.
Blocks: Up to 512 blocks, with a maximum block size of 128KB.
argument
Processor: 300 MHz Intel Celeron.
Memory: 16 MB flash, 32 MB DRAM.
I/O port: One 10BaseT/100BaseTX (RJ-45) Ethernet port.
Working voltage: AC 100V-240V, power 10W.
Operating temperature: -20℃~+60℃, storage temperature: -40℃~+80℃.
Humidity: 20%~95%.
specification
Dimensions: There are mentions of 233 x 89 x 44 mm, there are also mentions of 100mm x 50mm x 25mm, this may be due to different application scenarios or configuration caused by the differences.
Weight: 0.5kg.
IS200TSVOH2B is often described as a power control board, especially for medium frequency power control.
It can also be used as a control redundancy power configuration, compatible with FIP redundancy systems, with speeds up to 100MHZ.
Input and output:
It usually has a variety of input and output voltages to meet the needs of different devices.
Protection function:
It is equipped with over current protection, over voltage protection, under voltage protection and other protection functions to ensure the stable operation and safety of the equipment.
argument
Main power supply: AC220V 50Hz (allowed in the range of 85%~110%)
Standby power supply: ensures that the monitoring device works for at least 8 hours when the main power supply is at low voltage or in a power outage
Communication protocol: Modbus-RTU
Communication mode: RS485 half-duplex bus mode, transmission distance 1km (can be extended by repeater transmission distance)
specification
Monitoring capacity: ≤128 points
Display mode: 320*240 lattice LCD
Input/Output module: built-in remote intelligent I/O module
Standby power: DC24V, 10Ah (optional larger capacity battery)
argument
Number of entries: 24
Input type: dry contact
Input signal level: 24 V DC
Output quantity: 12
Output type: Relay output
Output signal level: 24 V DC
Rated current: 10 A
Rated voltage: 250 V AC/DC
Communication interface: Two Ethernet ports (100Base-TX)
specification
Dimensions: 230 mm x 170 mm x 85 mm
Weight: 2 kg
Mounting type: DIN rail mounting
Certification: CE, UL, CSA, C-Tick, RoHS
argument
Number of SSI data bits: A data value that defines how many bits of a data stream, ranging from 1 to 32.
The most important point (MSB) quantity: defines the first value of the bit position of the data in the data bit stream, ranging from 1 to 32.
Number of SSI clock bits: The number of bits set to determine the number of bits per interrogation read from the SSI sensor ranges from 1 to 32 and must be greater than or equal to (the most important bit number + (the number of SSI data bits – 1)), the 24-bit default is suitable for most applications.
specification
Rated input: 0 ~ 20 kaac.
Rated output: 0 ~ 20 madc, 0 ~ 5 vdc, 4 ~ 20 madc.
Accuracy: Level 1.0.
Linear range: 0 ~ 120%.
Isolated voltage: 5000vdc/1 minute.
Auxiliary power supply: +12vdc, ±12vdc, +24vdc.
Operating temperature: -20℃ ~ +60℃.
Early information suggests a 1Ghz Celeron M processor, but subsequent information mentions that it may have a dual-core 1.5GHz processor.
Some information mentions that it has 64MB of memory, while others state that it has 4 GB of Flash and 512 MB of RAM. This may refer to different types of memory or different configurations.
Communication capability:
Serial communication port supporting RS232 and RS485 communication standards.
Support Ethernet/IP, Modbus TCP, PROFINET IO and other communication protocols.
Power Supply:
The supply voltage can be 24 VDC or 120/240 VAC.
specification
Dimensions: 4.42 x 8.03 x 5.11 inches (112.3 x 204 x 129.8 mm).
