Grid view List view

Showing 313–324 of 3474 results

Sale!

GE DS303 A7A01LXA002XN

¥10,349.00

Parameters and Specifications:

  • Channel Quantity: 8 analog output channels
  • Output Voltage: 0~10 V, -10~+10 V, 4~20 mA
  • Accuracy: 0.01%
  • Resolution: 16 bits
  • Operating Temperature: -20℃~+60℃
  • Storage Temperature: -40℃~+70℃

Dimensions and Weight:

  • Dimensions: 120mm x 80mm x 60mm
  • Weight: 0.5kg
Sale!

GE SR489-P5-HI-A20-E

¥14,256.00

Parameters and Specifications:

  • Phase CT Auxiliary: 5 A
  • Control Power (HI): 90-300 VDC and 70-265 VAC (48-62 Hz)
  • Analog Output: 4 to 20 mA
  • Display: Enhanced Display with a Larger LCD
  • Fuse Rating: 2.5 A, Type 5x20mm HRC SLO-BLO Littelfuse, Model 215-02.5

Series:

  • GE Multilin 489 Series

Dimensions and Weight:

  • Dimensions and weight are not explicitly stated in the provided search results.
Sale!

GE IS220PSCAH1A

¥12,041.00

Parameters and Specifications:

  • Power Supply Voltage: 1A – 22A at 34 VDC, 3.4A at 12 VDC
  • Interface Type: Supports Modbus communication protocol
  • Physical Dimensions: 76.3×26×76.3mm
  • Weight: Approximately 0.136 kilograms
  • Operating Temperature Range: Cooling water -40 to +80°C
  • Maximum Power Consumption: 5W
  • DC Maximum Voltage: 500V

Series:

  • GE PLC Module (or similar)
Sale!

GE IS200VVIBH1CAC

¥24,159.00

Parameters:

System environment: normal temperature
System capability: Normal
System function: Normal
Operating system: PLC system
Output frequency: Depending on the search results, it may be 60Hz or 39kHz
Auxiliary output voltage: 5V/1A
Standby power consumption: <1W (EcoDesign)

Sale!

GE VMIVME-2540

¥14,529.00

Parameters and Specifications:

  • Processor: Intel Core i7
  • Memory: Up to 16 GB DDR4
  • Storage: 2.5-inch SATA SSD or HDD
  • Expansion Slots: 4 VMEbus expansion slots
  • Network Interfaces: 2 Gigabit Ethernet interfaces
  • Other Interfaces: RS-232, USB 3.0, video output, etc.
  • Operating Temperature: -40°C to +85°C1
  • Protection Level: IP67
  • Sampling Rate: 1ms/s
  • Signal-to-Noise Ratio: >90db
  • Total Harmonic Distortion: <0.01%
Sale!

GE IC697CPM790

¥14,259.00

Parameters and Specifications:

  • Clock Speed: 64 MHz
  • Microprocessor: 80486DX2
  • Data Width: 32-bit Floating Point
  • Memory: 1 Mbyte
  • Discrete Inputs/Outputs: Up to 12K (in mixed simplex mode only)
  • Operating Temperature Range: 0 to 60°C (32 to 140°F) without forced air cooling, 0 to 40°C (32 to 104°F) with forced air cooling
  • Clock Accuracy: 3.5 seconds per day (max)
  • Internal Timing Accuracy: 0.01% (max)
Sale!

GE VMIVME-2540

¥12,065.00

Parameters and Specifications:

  • Processor: Intel Core i7
  • Memory: Up to 16 GB DDR4
  • Storage: 2.5-inch SATA SSD or HDD
  • Expansion Slots: 4 VMEbus expansion slots
  • Network Interfaces: 2 Gigabit Ethernet interfaces
  • Other Interfaces: RS-232, USB 3.0, video output, etc.
  • Operating Temperature: -40°C to +85°C
  • Protection Level: IP67
  • Sampling Rate: 1ms/s
  • Signal-to-Noise Ratio: >90db
  • Total Harmonic Distortion: <0.01%
Sale!

GE IC697CPM790

¥15,269.00

Parameters and Specifications:

  • Clock Speed: 64 MHz
  • Data Width: 32-Bit Floating Point
  • Memory: 1 Mbyte
  • System Compatibility: IC66* Triple Modular Redundancy Systems
  • Supported Processor: 80486DX2 Microprocessor

Dimensions and Weight:

  • Size: Not explicitly stated
  • Weight: 4.00 pounds (approximately) / 0.15kg (according to a different source)
Sale!

GE VMIVME-5565

¥15,268.00

Parameters and Specifications:

  • Interface: VMEbus
  • Transfer Rate: 43 Mbyte/s (4 byte packets) to 174 Mbyte/s (64 byte packets)
  • Dynamic Packet Size: 4 to 64 bytes of data
  • Maximum Nodes: Up to 256 nodes
  • Fiber Connection: Multimode fiber up to 300m, single mode fiber up to 10km
  • Memory: 64 Mbyte or 128 Mbyte SDRAM Reflective Memory
  • DMA Channels: Two independent DMA channels
  • VMEbus Transfer Rate: 40 Mbyte/s
Sale!

GE IC697CPX782

¥15,269.00

GE IC697CPX782 is a high – performance central processing unit designed for the GE Fanuc Series 90 – 70 programmable logic controllers ( PLCs ). It is equipped with an 80486 DX4 microprocessor, which offers powerful processing capabilities.

Sale!

GE IC693CPU374

¥16,529.00

The GE IC693CPU374 is a crucial and high-performance CPU module specifically designed for the GE Fanuc Series 90 – 30 Programmable Logic Controller (PLC) system. It plays a pivotal role in the smooth operation of industrial automation setups.

Sale!

GE IC698CPE020

¥15,429.00
The GE IC698CPE020 is a high – performance CPU module in the PACSystems RX7i series. It is designed for industrial automation, capable of real – time machine control and communicating with other rack modules via a standard VME backplane.