Product Type: Motor Management Relay/Motor protection relay
Main functions: motor protection, monitoring, control
Input voltage: 90-300 VDC or 70-265 VAC (some say 12-48VDC)
Output voltage: 5VDC (for specific parameters only)
Output current: up to 10A (for specific parameters only)
Efficiency: greater than 90% (for specific parameters only)
Measuring function: current, voltage, frequency, power, etc
Communication interface: RS232, Modbus, PROFIBUS
Protection function: overload protection, short circuit protection, ground fault protection, stall protection, etc
Other functions: harmonic analysis, motor start-stop control, alarm recording, etc
Temperature measurement: With temperature measurement function, can monitor the motor or ambient temperature
Size and weight
Dimensions: 170mm x 105mm x 32mm (for specific parameters only)
Weight: Approx. 120g (for specific parameters only)
series
Series: Multilin 469 series
Input voltage range: Depending on the search results, the input voltage range of the HYDRAN M2 can be 12-48VDC, but may vary depending on the specific model and configuration.
Output voltage: Output voltage is 5VDC.
Output current: The maximum output current is 10A.
Efficiency: greater than 90%.
Measurement parameters: including the relative humidity (%) in the oil, hydrogen (H2), carbon monoxide (CO), acetylene (C2H2), ethylene (C2H4) and other fault gases.
Communication capability: Support communication with other GE Fanuc series PLC or DCS systems via point-to-point connection for easy data transmission and control.
Power supply voltage: Depending on the product specifications, a variety of power supply voltage ranges may be supported, the specific value needs to be further checked.
Working environment temperature: The ambient temperature required by PLC is usually 0~55°C. When installing it, avoid placing it under parts that generate more heat, and ensure that there is sufficient ventilation and heat dissipation space.
Working environment humidity: To ensure the insulation performance of the PLC, the relative humidity of the air should be less than 85% (no condensation).
Vibration: Keep away from strong vibration sources to prevent frequent or continuous vibration with a frequency of 10~55Hz.
Gas environment: The air should be free of corrosive and flammable gases, such as hydrogen chloride and hydrogen sulfide. For dusty or corrosive gas environments, it is recommended to install the PLC in a well-sealed control room or control cabinet.
Microprocessor: 600MHz Intel, or 1066MHz Intel EP80579 microprocessor
Memory: 256 MB DDR2 SDRAM
Operating System: QNX Neutrino, a real-time multitasking operating system developed for industrial applications that require extreme speed and reliability
The initial version is likely to be powered by a Pentium® III processor up to 1.26 GHz with 512 Kbyte advanced transfer cache.
Another is the Freescale PowerPC 7447A processor with a 1.267GHz frequency.
No matter what kind of processor, it has high performance computing power.
Memory:
PC133 SDRAM with a maximum memory capacity of 512 Mbyte, achieved through a single 144-pin SODIMM slot.
Another claim is support for up to 4GB DDR2 SDRAM, which may depend on different product versions or configurations.
Graphics support:
The built-in 815E chipset AGP graphics adapter supports high-resolution graphics and multimedia quality video.
The graphics adapter is complemented by a 4 Mbyte external synchronous DRAM cache and a high-bandwidth 64-bit data interface that supports screen resolutions of up to 1,600 x 1,200 x 256 colors (single view mode).
Parameters and specifications
Processor: Pentium-M (Pentium-M) microprocessor.
Main frequency: 1.6 GHz (some information mentions 1.8 MHz, but 1.6 GHz is more common and reasonable).
Memory: 64 MB of user memory and 64 MB of user flash memory are loaded.
Communication interface: Multiple communication interfaces such as RS-232, RS-485 and Ethernet are available for data exchange with other devices and systems.
trait
Real-time control: In industrial automation applications, real-time is very important, the IC698CPE040-JP can quickly respond to input signals and perform control operations.
Voltage and current: This board assembly may involve a variety of voltage and current specifications, but the details may vary from application to application. For example, some information indicates that it may support a wide voltage input range, such as 180 ~ 260V.
Output power: In some cases, its output power may reach 360W.
Input and output interface: The product has two high-speed pulse input interfaces, two analog input interfaces, six DI input interfaces and four DO outputs, supports RS485, CAN ports, and is compatible with MODBUS and CANOPEN protocols.
Size and weight
Size: Its dimensions may be around 115mm x 48mm x 150mm (L x W x H), but please note that this is only one possible size and the exact size may vary by product version or manufacturer.
Weight: The weight is about 1.2kg, but again, it’s important to note that this is only an estimate.
