1. Parameters
Rated current: 5 amp phase CT secondary coil
Control power supply: 70-265 volts AC, 90-300 volts DC
Protection accuracy: ±2%
Response time: ≤10 ms
2. Specifications
Brand: GE (General Electric)
Model: SR469-P5-HI-A20-E
Series: SR469 motor management relay series
3. Size and weight
Size: 100 mm x 70 mm x 30 mm (according to the latest information)
Weight: 0.5kg (according to the latest information)
1. Parameters
Control scale: 40 points MR/MT
CPU processing speed: 0.55~0.7μS/ basic instruction
Built-in memory: 2K capacity EEPROM memory, no battery, no protection
Built-in function: 2-axis independent 100kHz positioning function (transistor output type)
Dc power supply: 24V, 400mA DC power supply, can be used for peripheral devices such as sensors
Real-time clock: There is a real-time clock specification in all FX1NPLCs
2. Specifications
Brand: GE (General Electric)
Model: UR8FH
Series: May be related to Fx1n series PLC
3. Size and weight
Product size: 10cm × 12cm × 4cm
Product weight: 0.5kg
1. Parameters
Processor: Intel Celeron-M microprocessor
User memory: 20 MB (random access memory or RAM)
Flash memory: 20 MB
I/O operation capability: up to 32K I/O operations per second
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Power management: With power management function, can monitor the power status and power load, provide power failure detection and alarm function
Hardware protection: including overcurrent protection, overheat protection, short circuit protection, etc
Hot swap: Supports the hot swap function, allowing you to insert and remove modules when the system is running
2. Specifications
Series: GE Fanuc PACSystems RX3i series
Operating system: simple (may refer to the complexity of its firmware or system software)
Output frequency: 150Hz (may be related to the power supply or related equipment associated with the CPU module)
1. Parameters
Processor speed: 1.1 GHz Atom processor
Memory: 10 MB of non-volatile flash
Boolean logic execution speed: 0.72 ms/k
Power requirements: 3.3 volts DC, 5 volts DC or 24 volts DC
2. Specifications
Communication interface:
Embedded Ethernet interface supports 10Mb/ s and 100Mb/ s connections
RS-485 and RS-232 serial ports
USB-A 2.0 main port (for configuring applications and data transfer)
Protocol support:
The Ethernet port supports the SRTP protocol and the data transfer rate is 10/100 Mbaud
The serial interface supports SNP, serial I/O, Modbus RTU slave and Modbus master protocols
The fieldbuses supported by the controller include PROFINET, EGD, Modbus TCP server and client, Genius, and Profibus DP
1. Parameters
Processing speed: May contain information about the processor speed, but the exact value is not given directly.
Power current: The power current is mentioned in the search results (e.g. 1KHL015545R0001), but this may be a specific part number or code rather than a direct current value.
Power supply voltage: Not directly given, but may support a variety of voltage standards to suit the power needs of different regions.
Power: Power is mentioned (e.g. 3BHB002651R1), but again it may be a specific part number or code.
1. Parameters
Processor speed: 1.1 GHz Atom processor
Memory: 10 MB battery-powered non-volatile flash memory
Boolean logic execution speed: 0.72 ms/k
Communication interface: two serial ports (RS232 and RS485) and an Ethernet communication interface
I/O capacity:
Discrete input/output: up to 32K bits
Analog input/output: 32K words
Block support: Up to 512 blocks, each block up to 128 KB
2. Specifications
Power requirements: 3.3 volts DC, 5 volts DC or 24 volts DC
trait
Features:
Compatibility: The IC647TRT300 may be compatible with other GE control systems or PLCS (Programmable logic controllers) for easy integration into existing automation systems.
High performance: May provide high performance control or power supply capabilities to meet the needs of complex applications.
Ease of installation and configuration: The design may have been designed with ease of use in mind, making the installation and configuration process relatively simple and quick.
Reliability: As a GE product, the IC647TRT300 may have high reliability and stability to ensure long-term stable operation of the system.
Real clock: Supported
Communication speed: Ethernet communication speeds up to 100 Mbps are supported
Typical scan rate: 0.15 ms per 1K logic
Rated power: 7.4 watts (other information indicates that the power consumption is 3W, which may refer to the power consumption in different configurations or operating states)
Supply voltage: 5 V DC
specification
Module type: CPU module
Series: 90-30 series
Memory type: RAM and Flash
Total number of racks: 8
argument
Processor type: AMD SC250 or AMD SC520 (different terms, but both are embedded processors)
Processor speed: 133 MHz
User memory: 240 KB
I/O points: 2048 fixed discrete input and output points
Discrete global storage capacity: 1280 bits
Register memory: can be configured from 128 to 32,640 words
System registers: 28 fixed system registers
Timer/counter: About 2000
Rated power: 7.4W (some say 3W, may be different versions or configurations)
Supply voltage: 5V DC or 24V DC (varies, may be different versions or configurations)
Communication speed: Ethernet communication up to 100 Mbps is supported
argument
Range: 120-220 (120-210 mentioned in some information)
Accuracy: 0.1-0.5
Operating temperature: 0 to 60°C (32°F to 140°F)
Execution speed: 0.072 ms per 1000 Boolean instructions
Clock accuracy: Maximum drift of 2 seconds per day
specification
Control principle: DCS (some information mentioned as others)
System memory: 512MB (mentioned in some information)
Power requirements: +5 VDC: 1.0A
dimension
Size: 100*260mm
weight
Weight: 1kg
argument
Processing speed: 1 GHz
User memory: 20 MB (random access memory or RAM)
Flash memory: 20 MB
I/O operation capability: Capable of up to 32K I/O operations per second
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Power requirements: 3.3 volts DC and 1 amp or 5 volts DC and 1.2 amps
Operating temperature range: from 32 degrees Fahrenheit to 140 degrees (0 degrees Celsius to 60 degrees Celsius)
argument
Power requirements: Works with the IC697PWR710 or IC697PWR711 power module.
Processor performance: May be equipped with a high-performance CPU that supports high-speed data processing.
Memory: May contain a certain amount of memory for storing programs and data.
I/O interface: Provides multiple input/output (I/O) interfaces for connecting to other modules or devices.
specification
High-speed processing: PACSystems Rx3i high-speed processors and patented technology make the time from input to output faster, avoiding information bottlenecks.
High performance: Supports programming and high performance computing for complex industrial automation applications.
Modular design: Easy to expand and maintain, additional modules can be added as needed.