- Output voltage : 24VDC.
- Output current : Max. 1.5 amps.
- Input voltage range : 18 to 30 VDC.
- Operating temperature : -40 to 70°C.
- Relative humidity : 5% to 95% ( non-condensing) .
- Interface : RJ45.
- voltage range : Suitable for voltage ranges up to 0-264 VAC
- current : 2 amps per point or 8 amps per power source and ground
- number of terminals : has 36 terminals. is used for single or double wire connection to
- Conductor dimensions : the cross section of single wire is 0.36 mm to 2.1 mm square, the cross section of single wire is 0.36 mm to 2.1 mm square, the cross section of double wire is up to 0.86mm square
- processor : Uses Pentium-M microprocessor 12 or PowerPC®e500mc processor architecture
- main frequency : main frequency is 1.6 GHz or 1.8 MHz
- memory : comes with 64 MB of user memory and 64 MB of user flash memory.
- communication interface : including RS-232, RS-485 and Ethernet, is convenient for data exchange with other devices and systems.
- power supply : operates on 5 volts DC, 24 volts DC or -24 volts DC.
- Dimensions : approximately 200 mm x 150 mm x 70 mm
- Weight : about 2 kg.
Processor: 600 MHz Pentium-M microprocessor
Memory: 64 MB user memory and 64 MB user flash memory
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O
Boolean contact/coil response time: 1000 Boolean contacts/coil 0.069 ms
Type: Programmable Automation controller (PAC) CPU module
Brand: GE (now part of Emerson Automation)
Support system: PLC
Power Supply: 24 volts direct current (VDC), 3.4 amps (AMP).
Processor: High-performance dual-core CPU to ensure efficient operation of the system.
Memory: The RXi Box IPC features 4G RAM memory for high-performance design.
Storage system: Standard 32GB industrial solid state drive, optional 250GB hard drive to ensure data storage security.
Network interface: Supports Gigabit PROFINET (built-in MRP redundancy) and Ethernet ports, providing high-speed data transmission capabilities
This device may belong to a series of GE quick Panel view operation terminals. Specific parameters, such as the number of input and output points and number of analog input and output channels, may vary according to the model or configuration
Equipped with color TFT display, provides intuitive operation interface
The display measures 5.75 inches, has a resolution of 320 x 240 pixels, and is suitable for use as a human-machine interface.
The overall weight of the device is light. may refer to the product manual for the specific value. is easy to install and carry.
High precision and long life
Wide frequency range
Wide operating temperature range
Strong anti-interference ability
Easy to install
High reliability
Accuracy: up to ±0.5%
Frequency range: DC to 100kHz
Operating temperature range: -40℃ to +85℃
Rated current: 20A
30g
Other versions may be heavier, such as 2KG
Insulation resistance: 100MΩ, indicating that it has good insulation performance.
Compressive strength: AC2.5kV/1min, indicating that it can still maintain stability and safety under high voltage.
Rated current: Depending on the specific application scenario, it may vary, but some applications mention 20A
Accuracy: ±0.5%, indicating that it has high accuracy in current measurement.
Frequency range: DC-100kHz, suitable for a wide range of frequencies.
Interface: VMEbus
Number of channels:
Number of analog input channels: 16
Number of analog output channels: 16 bits
Digital I/O: 32 lines
Resolution:
Analog input/output resolution: 16 bits
ADC sampling rate: 500ksps
DAC output rate: 1Msps
Operating temperature: 0 ~ 60℃
Storage temperature: -40℃~ 70℃
Humidity: 5% ~ 95%, no condensation
Power Supply: The 120/230V AC version provides an internal 24VDC power supply to protect against short circuits and overloads
Dimensions: 5.37 x 3.5 x 1.25 inches (136.5 x 88.9 x 31.8 mm)
Weight:
0.39kg (one way to say it)
4.40 pounds
Processor:
The initial version is likely to be powered by a Pentium® III processor up to 1.26 GHz with 512 Kbyte advanced transfer cache
The other configuration uses a Freescale PowerPC 7447A processor at 1.267GHz
Memory:
The initial release supports PC133 SDRAM of up to 512 Mbyte, achieved through a single 144-pin SODIMM
The other configuration supports up to 4GB DDR2 SDRAM
Storage:
The initial version has a built-in 815E chipset AGP graphics adapter, supplemented by 4 Mbyte external synchronous DRAM cache
Supports the CompactFlash Type II card as the storage medium
Operating frequency: 64 MHz
Processor type: Microprocessor 80486DX with 32-bit floating point computing capability
Program and data memory: The Mbyte battery supports CMOS RAM, where 512 Kbytes of memory is available for the user’s applications and data
Clock accuracy: 3.5 seconds per day (Max.), internal timing accuracy 0.01% (Max.)
Operating temperature range: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) when forced air cooling.
Operating voltage: Different sources mention voltages that may be 24VDC, 10-30VDC, or others, depending on the application scenario and configuration.