The DS200RTBAG2AGC is a specialized, high-capacity remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G2AGC” suffix denotes the second-generation “A” revision with enhanced terminal capacity, conformal coating (environmental protection), and an advanced configuration (additional diagnostic and communication features beyond the “G2A” and “G2AFB” variants). This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O with the highest capacity, while its conformal coating provides superior protection against moisture, salt spray, and airborne contaminants. The DS200RTBAG2AGC offers the highest terminal capacity (80 terminals), highest output current capacity (2A per channel), conformal coating, and an advanced configuration that includes fieldbus communication and comprehensive diagnostics, making it the ultimate Mark V remote terminal board for the most demanding applications. As a legacy spare part, the DS200RTBAG2AGC is among the rarest and most valuable Mark V boards, reserved for mission-critical power generation plants, offshore platforms, and industrial facilities operating GE turbines under the most extreme conditions with extensive distributed I/O, higher-power field devices, and advanced fieldbus architectures.
The DS200RTBAG2AFB is a specialized, high-capacity remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G2AFB” suffix denotes the second-generation “A” revision with enhanced terminal capacity and an integrated fieldbus interface, combining the higher density of the “G2A” platform with fieldbus communication capabilities. This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O with higher capacity, while the integrated fieldbus interface enables direct communication with smart field devices and actuators. The DS200RTBAG2AFB offers the highest terminal capacity (80 terminals) and output current capacity (2A per channel) of any Mark V remote terminal board, combined with an integrated fieldbus interface (Profibus DP, MODBUS RTU, or Foundation Fieldbus). As a legacy spare part, the DS200RTBAG2AFB is among the rarest and most valuable Mark V remote terminal boards, reserved for the most demanding power generation plants, offshore platforms, and industrial facilities operating GE turbines with extensive distributed I/O, higher-power field devices, and advanced fieldbus architectures.
The DS200RTBAG2A is a specialized, high-capacity remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G2A” suffix denotes the second-generation “A” revision, representing a significant upgrade over the first-generation “G1A” models (DS200RTBAG1A, etc.). The “2A” revision features enhanced terminal capacity, improved current handling, and expanded diagnostic capabilities, making it the preferred choice for demanding distributed control applications. This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O with higher density and improved performance. As a legacy spare part, the DS200RTBAG2A is valued in power generation plants and industrial facilities operating GE turbines with extensive remote I/O requirements and where increased capacity and diagnostic visibility are essential.
The DS200RTBAG1AFB is a specialized, high-performance remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G1AFB” suffix denotes the first-generation “A” revision combined with conformal coating (environmental protection) and an enhanced fieldbus configuration (integrated fieldbus communication interface beyond standard I/O termination). This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O, while its conformal coating provides superior protection against moisture, salt spray, and airborne contaminants. The DS200RTBAG1AFB offers an integrated fieldbus interface (e.g., Profibus DP, MODBUS, or Foundation Fieldbus) that enables direct communication with smart field devices and actuators, significantly reducing wiring complexity and enabling digital diagnostics. As a legacy spare part, the DS200RTBAG1AFB is among the rarest and most valuable Mark V remote terminal boards, reserved for mission-critical power generation plants, offshore platforms, and industrial facilities operating GE turbines with advanced fieldbus architectures and harsh environmental conditions.
The DS200RTBAG1AEB is a specialized, high-performance remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G1AEB” suffix denotes the first-generation “A” revision combined with conformal coating (environmental protection) and an extended monitoring configuration (additional diagnostic features beyond the DS200RTBAG1ABB). This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O, while its conformal coating provides superior protection against moisture, salt spray, and airborne contaminants. The DS200RTBAG1AEB offers enhanced current sensing per channel, expanded LED diagnostics, and improved communication monitoring for the most demanding remote I/O applications. As a legacy spare part, the DS200RTBAG1AEB is among the rarest and most valuable Mark V remote terminal boards, reserved for mission-critical power generation plants, offshore platforms, and industrial facilities operating GE turbines under the most extreme conditions with distributed control architectures.
The DS200RTBAG1ABB is a specialized remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G1ABB” suffix denotes the first-generation “A” revision combined with conformal coating (environmental protection) and an enhanced “B”-level configuration (additional features beyond the base model). This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O with superior protection for harsh environments. The DS200RTBAG1ABB is designed to be installed in remote junction boxes or marshalling cabinets, consolidating field wiring from sensors, actuators, and other field devices, while its conformal coating provides superior protection against moisture, salt spray, and airborne contaminants. As a legacy spare part, the DS200RTBAG1ABB is valued in power generation plants and industrial facilities operating GE turbines in coastal, offshore, or chemically aggressive environments with distributed control architectures.
The DS200RTBAG1A is a specialized remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G1A” suffix denotes the first-generation “A” revision of this remote I/O interface module. This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O. The DS200RTBAG1A is designed to be installed in remote junction boxes or marshalling cabinets, consolidating field wiring from sensors, actuators, and other field devices, and connecting back to the main Mark V rack via a multi-conductor cable or backplane interface. As a legacy spare part, the DS200RTBAG1A is valued in power generation plants and industrial facilities operating GE turbines with distributed control architectures, where field devices are located at a distance from the main control rack.
The DS200QTBAG3ADC is a specialized, ultra-high-density terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “QTBA” designation indicates a Quad Terminal Board Assembly, while the “G3ADC” suffix denotes the third-generation “A” revision combined with conformal coating (environmental protection), enhanced diagnostic capabilities, and advanced configuration for the most demanding I/O applications. This board serves as the primary connection point for field wiring, providing the highest terminal density in the Mark V product family, with comprehensive diagnostic features for improved troubleshooting and predictive maintenance. The DS200QTBAG3ADC is designed for the most demanding Mark V installations with extreme I/O density, combining 96 terminals, conformal coating, enhanced diagnostics, and high-current output capacity. As a legacy spare part, the DS200QTBAG3ADC is among the rarest and most valuable Mark V boards, reserved for mission-critical power generation plants, offshore platforms, and industrial facilities operating GE turbines under the most extreme conditions.
The DS200QTBAG1B is a specialized, high-density terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “QTBA” designation indicates a Quad Terminal Board Assembly, while the “G1B” suffix denotes the first-generation “B” revision, representing a significant upgrade over the “A” revision (DS200QTBAG1A). The “B” revision features enhanced current handling capacity, additional terminal blocks, and improved diagnostic capabilities, making it suitable for more demanding I/O applications. This board serves as the primary connection point for field wiring, providing quadruple the terminal density of standard terminal boards, with support for higher-current output channels and a greater number of field connections. As a legacy spare part, the DS200QTBAG1B is valued in power generation plants and industrial facilities operating GE turbines with extensive instrumentation and higher power requirements.
The DS200QTBAG1ADC is a specialized, high-density terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “QTBA” designation indicates a Quad Terminal Board Assembly, while the “G1ADC” suffix denotes the first-generation “A” revision combined with conformal coating (environmental protection), enhanced diagnostic capabilities, and an extended configuration for demanding I/O applications. This board serves as the primary connection point for field wiring, providing four times the terminal density of standard terminal boards, with additional diagnostic features for improved troubleshooting and predictive maintenance. The DS200QTBAG1ADC consolidates a large number of analog and digital I/O field connections into a single board, while its conformal coating provides superior protection against moisture, salt spray, and airborne contaminants. As a legacy spare part, the DS200QTBAG1ADC is valued in power generation plants and industrial facilities operating GE turbines in harsh environments with extensive instrumentation, where space efficiency, diagnostic visibility, and environmental protection are critical for maintainability and reliability.
The DS200QTBAG1A is a specialized high-density terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “QTBA” designation indicates a Quad Terminal Board Assembly, while the “G1A” suffix denotes the first-generation “A” revision of this high-density I/O interface module. This board serves as the primary connection point for field wiring, providing four times the terminal density of standard terminal boards. The DS200QTBAG1A consolidates a large number of analog and digital I/O field connections into a single board, significantly reducing the rack space required for termination. As a legacy spare part, the DS200QTBAG1A is valued in power generation plants and industrial facilities operating GE turbines with extensive instrumentation, where space efficiency and organized field wiring are critical for maintainability and reliability.
The DS200PTCTG2BAA is the ultimate, highest-capacity hybrid board manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “PTCTG” designation indicates a Power Terminal and Communication Gateway board, while the “G2BAA” suffix denotes the second-generation “B” revision combined with conformal coating (environmental protection) and an extended I/O monitoring configuration. This board represents the absolute pinnacle of the Mark V hybrid product line, offering the highest current ratings available (20A +5V, 8A ±15V, 5A +24V, 2A +3.3V, dual +12V auxiliary rails), conformal coating for harsh environments, expanded communication interfaces (4 serial ports, dual Ethernet, fiber optic, USB, IEC 61850 support), and a comprehensive diagnostic LED array. The DS200PTCTG2BAA is designed for the most demanding Mark V installations with extreme I/O density, multiple processor boards, and complex communication requirements in the harshest operating environments. As a legacy spare part, the DS200PTCTG2BAA is among the rarest and most valuable Mark V boards, reserved for mission-critical power generation plants, offshore platforms, and industrial facilities operating GE turbines under the most extreme conditions.
