Grid view List view

Showing 3085–3096 of 3474 results

GE IC200ALG320

¥4,263.00
GE IC200ALG320 is a 4-point analog current output module from the VersaMax I/O series. It was previously produced by GE Intelligent Platforms and is now part of Emerson Automation. This module offers a range of specifications, features, and applications that make it suitable for various industrial automation tasks.
Parameters and Specifications:
The IC200ALG320 module has four (4) single-ended output channels capable of generating 4-20 mA output signals with a resolution of 4µA and a maximum update rate of 0.3 ms.
It requires an external power supply ranging from 18-30 VDC or 9.6-15 VDC.
The module is designed for distributed or remote I/O networks, often used in large and medium-sized control systems, eliminating long signal runs and contributing to robust and scalable control systems.
Dimensions and Weight:
The specific dimensions and weight of the IC200ALG320 module may vary depending on the manufacturer’s specifications. It is recommended to consult the official technical documentation for accurate measurements.

GE 469-P5-HI-A20-E SR469-CASE

¥3,521.00
GE 469-P5-HI-A20-E SR469-CASE is a motor protection device produced by General Electric (GE) specifically designed for protecting and monitoring motor and generator systems. It ensures the safe and efficient operation of these systems by preventing damage from electrical issues such as overcurrent, overheating, and short circuits.
Parameters and Specifications:
Control Power: The device operates on a control power range of 70-265 VAC and 90-300 VDC.
Phase CT Secondary: It features a 5-ampere phase CT secondary.
Output: It provides a 4 to 20 mA analog output.
Dimensions and Weight:
Dimensions: The exact dimensions of the device may vary slightly based on its packaging and accessories. However, it is typically designed to fit within a standard enclosure or case.
Weight: The weight also depends on the complete assembly, including any additional components or accessories.
Series:
GE 469-P5-HI-A20-E SR469-CASE belongs to the SR469 series of motor management relays.

GE IC695CRU320CA-EL

¥6,235.00
GE IC695CRU320CA-EL is a redundant programmable automation controller (PAC) module designed for industrial automation systems. Here are its key parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters:
Operating Voltage: 24VDC.
Processor Speed: 800MHz (in some references) or 1GHz (in other references).
Specifications:
Storage Capacity: 2GB.
Supported Communication Protocols: Modbus TCP/IP, PROFINET, Ethernet/IP.
Operating Temperature: -20℃ to 60℃ or -40℃ to 70℃.
Storage Temperature: -40℃ to 85℃.
Humidity: 5% to 95% non-condensing.
Dimensions and Weight:
Dimensions: 150mm x 100mm x 50mm or 4.4 x 12.4 x 13.1 inches.
Weight: 1.5 pounds (approx. 0.68 kg) or 1.89kg in some references.
Series:
GE IC695CRU320CA-EL belongs to the PACSystems RX3i product series.

GE IC693CPU374

¥5,426.00
The GE IC693CPU374 is a high-performance programmable logic controller (PLC) module designed for industrial automation systems. Below is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Processor Type: The IC693CPU374 features a 586-level processor with a clock speed of 133 MHz, providing high-speed processing for complex control logic and data handling.
Memory: It comes with 240 KB of user-configurable memory for storing control programs, data, and configuration information.
I/O Capacity: The module has 4K I/O points, providing sufficient capacity for a wide range of industrial control applications.
Communication: The IC693CPU374 supports TCP/IP communication, allowing it to interface with other devices and systems, such as 90 series, PACSystems, and VersaMax PLCs. It also features an embedded Ethernet controller with a communication speed of up to 100 Mbps.
Expansion Capabilities: The module supports expansion with additional chassis, I/O modules, and communication interfaces, enabling it to meet the needs of larger and more complex systems.
Dimensions and Weight:
Dimensions: The IC693CPU374 typically has dimensions of approximately 115mm x 48mm x 150mm. However, it’s always advisable to consult the manufacturer’s official documentation for precise measurements.
Weight: The weight of the module is not typically specified as a standalone parameter. It is generally lightweight and suitable for rack-mounting in industrial control cabinets.

GE IC693PWR330

¥5,132.00
The GE IC693PWR330 is a power supply module specifically designed for industrial automation systems. Below is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Type: Power Supply Module for industrial automation and control systems.
Power Input: Typically designed to accept a standard power input range suitable for industrial environments.
Output: Provides stable and reliable power output to support the operation of connected devices and components.
Protection: Incorporates input overvoltage protection to safeguard the system against power fluctuations and spikes.
Dimensions and Weight:
Dimensions: Exact dimensions may vary slightly depending on the manufacturer and model variant, but it is typically designed for a compact footprint suitable for rack-mounting in industrial control cabinets.
Weight: Weight details are not always publicly available, but it is generally lightweight for ease of installation and handling.

GE IC693ALG221

¥6,021.00
The GE IC693ALG221 is a specialized analog input module designed for industrial automation and control systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Module Type: Analog input module, specifically designed for voltage or current signal acquisition.
Input Channels: Typically features 4 input channels for analog signals.
Input Ranges: The module accepts voltage signals ranging from -10 V to +10 V or current signals from 4-20 mA to 0-20 mA.
Resolution: Offers a high resolution of 12 bits, ensuring accurate signal acquisition and representation.
Isolation: Provides isolation between the field side and the logic side, typically with a field-to-logic isolation voltage of 1500 VRMS.
Update Rate: The module has a specified update rate for its channels, typically specified in milliseconds.

GE IC693ALG222

¥6,135.00
The GE IC693ALG222 is a highly specialized analog input module designed for industrial automation systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Type: The GE IC693ALG222 is an analog input module.
Input Channels: It typically features 16 channels for analog voltage input.
Input Ranges: These channels can accommodate various analog voltage input ranges, suitable for different applications.
Resolution: The module offers high resolution for accurate analog signal measurement.
Communication Interface: Supports communication with the main control system or PLC through a suitable interface.
Dimensions and Weight:
Dimensions: The module’s dimensions are typically compact, designed for rack-mounting in industrial control systems. However, specific dimensions may vary depending on the manufacturer’s specifications.
Weight: The weight of the module is relatively lightweight, facilitating easy installation and handling. Exact weight details may be available in the manufacturer’s documentation.

GE IC693ALG223

¥5,469.00
GE IC693ALG223 is a Programmable Logic Controller (PLC) module specifically designed for industrial automation and process control applications. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Type: PLC module, specifically a digital input module.
Input Channels: 32 input channels that accept digital signals from external devices.
Compatible Controllers: Compatible with various GE FANUC PLC controllers, such as IC693CPU, IC693CR, IC693CI, etc..
Circuit Design: Advanced circuit design and manufacturing processes ensure high precision, reliability, and performance.
Dimensions and Weight:
Dimensions: Exact dimensions may vary slightly, but it is typically designed for a compact footprint suitable for industrial applications.
Weight: The weight is relatively lightweight for ease of installation and handling, but specific weight information is not available without referring to the manufacturer’s documentation.
Series:
The GE IC693ALG223 belongs to the GE FANUC PLC I/O module series.

GE IC693ALG392

¥4,269.00
The GE IC693ALG392 is a high-performance analog output module designed for use in industrial automation systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Module Type: Analog current/voltage output module.
Output Ranges: Supports 4 to 20 mA or 0 to 20 mA output current ranges, as well as 0 to 10 VDC and -10 to 10 VDC output voltage ranges.
Resolution: Configurable for 15 or 16 bits depending on the selected analog output range.
Update Rate: Each channel has an update rate of 8 milliseconds.
Calibration: Factory calibrated with precise voltage and current outputs.
Dimensions and Weight:
Dimensions: Exact dimensions may vary, but it is typical for modules in this series to have a compact form factor suitable for rack-mounting in control systems.
Weight: The weight is approximately 3.00 lbs (1.36 kg).

GE HE693RTD600

¥5,260.00
GE HE693RTD600 is a vibration quantity input card, commonly utilized in industrial automation and monitoring systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Brand: GE (General Electric)
Model: HE693RTD600
Voltage: 220V
Power: 5KW
Function: Measures vibration signals, including vibration velocity, acceleration, and displacement. This data is then used to evaluate the vibration level of equipment, enabling the detection of abnormal vibrations.
Dimensions and Weight:
Size: 166mm x 112mm x 36mm
Weight: 7kg

GE HE693THM809 

¥6,035.00
The GE HE693THM809 module is a highly specialized component designed for industrial automation and control systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Type: The GE HE693THM809 is a thermocouple input module.
Measurement Range: It has a measurement range of -55+160.
Measurement Accuracy: The module offers a measurement accuracy of 0.01.
Power Supply: It typically operates on a rated power supply.
Power Consumption: Its power consumption is 10V.
Dimensions and Weight:
Dimensions: The module’s dimensions are approximately 48mm x 96mm x 118mm.
Weight: The exact weight may vary, but it is designed to be lightweight for easy installation and handling.

GE LAM605-109114-003

¥4,625.00
The GE LAM605-109114-003 is a specialized module designed for industrial automation and control systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Power: 1000W.
Voltage: 220V/50Hz.
Maximum Rotational Speed (RPM): 5000.
Maximum Acceleration: 100m/s².
Dimensions and Weight:
Size: 300mm x 300mm x 200mm (Length x Width x Height).
Weight: 10kg.
Series:
This module belongs to the LAM series of GE automation components.