Parameters and specifications
Model: IC695CPU310-GV
Series: GE Fanuc RX3i series
CPU frequency: 300 MHz
Memory: 10 MB RAM and 10 MB flash
Supported Serial protocols: Modbus RTU Slave, SNP, and Serial I/O
LED indicators: Eight LED indicators on the front of the chassis are used to display the system status
Programming method: Support ladder diagram, structured text, C or function block diagram programming language
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Floating-point data format support: Floating-point data format is supported
Parameters and specifications
Model: IC693CPU363
Series: 90-30 series PLC system
User logical memory: 240KB
Input/output capacity: 4KB
Number of supported racks: 8
Boolean execution speed: 0.22 ms per thousand logic (Boolean contact)
Processor type: 80386X, 25MHz speed
Power required for operation: +5VDC, current 890mA
Working environment temperature: 0 to 60 degrees
Communication capability: The IC695PBM300 is a Profibus DP master module designed to communicate with up to 125 DP slave stations.
Data transfer: Supports data transfer sizes of 244 bytes input and 244 bytes output per device, and supports up to 3.584 bytes input data and 3.584 bytes output data.
Data rate: All standard data rates are supported, including 9.6 kBit/s, 19.2 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, and 12 MBit/s.
Series:
The IC695PBM300 is part of Emerson Automation’s PACSystems RX3i Programmable Automation controller (PAC) family.
Parameters and specifications
Working voltage: 24VDC
Operating temperature: -40℃ to 70℃
Operating humidity: 5% to 95%
Communication speed: 100Mbps
Communication protocol: Ethernet /IP
Supported chip: FPGA
Product specifications: Size 125mm x 72mm x 138mm, weight 0.5kg
Case material: metal
Mounting method: DIN rail mounting
Applicable model: RX3i controller
Size and weight
Dimensions: 125mm x 72mm x 138mm
Parameters and specifications
Brand: GE Fanuc (or GE General Electric)
Model: IC695CMM004
Communication protocol: Supports Modbus, DNP3 and other protocols
Serial ports: Provides 8 separate and isolated serial ports (note: different from the 4 ports mentioned in the first search result, but may be a later version or newer description)
Baud rate: from 1200 to 115.2 thousand baud
Power requirements: 0.7 amps at 3.3 volts DC, 0.15 amps at 5 volts DC
Maximum overvoltage rating: +/-25 volts
Minimum inter-channel crosstalk: -55 dB
Isolation of ports from the backplane: 250 V AC continuous
Port to port isolation: 500 V DC continuously and 710 V DC for up to 1 minute
Operating temperature range: 0 to 60 degrees Celsius
Parameters and specifications
Model: IC697CMM742.
Main application: This module is mainly used in the 90-70 series PLC (Programmable logic controller) system.
Network Protocol support: Supports a variety of network protocols, such as IEEE 802.2 Logical Link Control Class I LAN and IEEE 802.3 Media Access Control 10Mbps LAN.
Network port: It has three network ports, including 10Base-T RJ-45 port, 10Base2 BNC port and AUI port.
Communication rate: The maximum communication rate of 1Mbps is supported.
Supported communication protocols: Modbus RTU, Modbus ASCII, Profibus DP, etc.
Voltage and current: Absorb 2 amps of large backplane current at +5 volts DC and 0.5 amps of large backplane current at +12 volts DC.
Operating voltage range: 85~264VAC.
Output voltage: 24VDC.
Output power: 360W.
Input current: 500mA.
Parameters and specifications
Make and Model: GE IC693BEM341 series.
Usage: Usually used in industrial automation and control systems, as a PLC (programmable logic controller) communication or processing module.
Specific parameters and specifications: The IC693BEM341 may be a GE product series, and its specific parameters and specifications may vary according to different application scenarios and product versions. In general, GE’s COTS rugged system family is based on 3U VPX and CompactPCI architectures, with 2-, 3-, 4- and 5-slot chassis options, and uses Intel or Freescale processors.
series
Series: IC693BEM341 is one of the COTS hardening system series products provided by GE.
Input voltage: may be 85~265VAC, 50/60Hz, or 100~240VAC (different sources may vary).
Output voltage: 24VDC (according to [1]) or 0~10V DC (according to [3]).
Maximum current load: 2A (according to [1]).
Operating temperature: -20 ° C to +70 ° C (according to [1]) or -10 ° C to 60 ° C (according to [3]).
Size and weight
Size: 100mm x 100mm x 50mm (according to [1]) or 100mm x 80mm x 30mm (according to [3]).
Weight: 500g (according to [1]) or 0.2kg (according to [3]) or 0.62kg (according to [4]).
series
The D20EME may be a stand-alone module model, rather than a full family name. However, it may be part of a broader family of industrial automation systems or components.
