Module Type: The VMIVME-5565-110000/332-015565-110000 P is a VME-based module specifically designed for industrial automation and control systems.
Data Transfer Rate: The module supports high-speed data transfer at rates up to 170 Mbyte/s, allowing for efficient sharing of data between multiple systems.
Memory Configuration: Each reflection memory board can be configured with 64 MB or 128 MB of on-board SDRAM.
Interface: The module provides multiple interfaces for communication and connection with other devices, including analog inputs, digital inputs/outputs, and serial communication interfaces.
– maximum communication speed – 12 MB
– communication range – 1000 meters
– working temperatures: -40 c to 70 c
– operating voltage: dc24v
– communication interface: rj45
Product specifications
– size: approx. 117 mm x 36mm x 110 mm
– weight approx. 200g
Ic6994mdl754 is a digital output module available for use in the PLC series ge systems. The module has the characteristics and characteristics of the following products:
* * product specifications
– 32 output points
– output current 0.5 a
– export type PNP
Communication Protocol: Supports Modbus/RTU communication protocol.
Channels: Provides two Modbus/RTU master channels, controllable by a 90-30/90-70 controller for accessing data from remote RTUs.
Programming Flexibility: Each channel can be individually programmed for dial-in, dial-out, radio modem, multi-point (RS422/RS485), and direct connection (RS232) operations.
Data Transmission: Can send or receive analog or discrete data using standard RTU commands.
Command Capacity: Able to send multiple commands to each slave, with each command requesting a single point or multiple consecutive points, up to a maximum of 250 bytes.
Power Consumption: Has a power consumption of 1000mA @ 5VDC.
The PLC is specifically designed for the GE Fanuc 90-30 series and has high-capacity power supply requirements.
It may include features such as high-speed parallel bus expansion interface, support for up to seven expansion racks, and system fault isolation.
Programming and configuration of the PLC are typically easy due to the absence of DIP switches and the use of software for configuration.
Features:
High Reliability: PLCs are known for their high reliability and stability, ensuring consistent operation in harsh industrial environments.
Programming Flexibility: The PLC supports various logic control, sequence control, and motion control functions through programming.
Model Number: IC693CPU372
Manufacturer: General Electric (GE)
It is designed for use in VersaMax PLC, PACSystems, and 90-series controllers.
It offers user-programmable memory, typically 120 KB, for storing control logic, programs, and data.
Features:
Ethernet Communication: It includes a built-in Ethernet communication interface, supporting protocols like Modbus TCP/IP, allowing for seamless communication and data exchange with other devices or systems.
The IC693CPU374 module incorporates a high-performance processor, capable of executing complex control logic and data processing tasks.
It typically features built-in RAM and Flash memory for storing control programs, data, and configuration information.
The module supports multiple communication interfaces, including Ethernet and possibly serial ports, for seamless communication and data exchange with other devices and systems.
Features:
The module supports real-time control, allowing for precise monitoring and control of industrial processes, equipment, and systems.
It typically uses Ladder Logic or other PLC programming languages for configuring control logic.
Model Number: IC697CPX782.
Brand: GE.
Origin: USA.
Voltage and Power: 3.9 AMP, 350 WATT.
Voltage Range: 85-264 VAC.
Frequency: 47-63 HZ.
Features:
The IC697CPX782 is a power supply module for the RX3i system and its components.
It is designed for use in industrial control systems and provides power to other modules or components.
Brand: General Electric (GE)
Model: IC647TRT300
Voltage: 220V
Output Frequency: 350kHz
Series: ICS processor module
Features:
Compatibility: The IC647TRT300 is designed to work with various DCS systems and can be integrated into existing systems.
Power Supply: It provides power to the CPU and other components of the DCS system, ensuring stable and reliable operation.
Processor: 1.1 GHz Atom processor.
Memory: 10 MB memory. However, another reference mentions 13 MB of user memory.
Ethernet Ports: 3 – 2 port switch, supporting speeds of 10/100/1000 Mbps.
Protocols: Supports various protocols such as SRTP client/server, Modbus TCP/IP, OPC UA, EGD, PROFINET, DNP3, IEC-61850 client, and IEC-104 server.
Features:
Real-time Control: Designed for real-time control of machines, processes, and material handling systems.
Connectivity: Communicates with I/O and intelligent option modules via dual-purpose PCI and serial backplane.
Brand: GE
Model: IC698CPE010-AA
Type: DCS (Distributed Control System) CPU module
Voltage: 90V
Resistance: 32Ω
Current: 19A
Memory: 125MB
Storage: 260MB for storing programs, data, and other important information
System Compatibility: Compatible with PLC (Programmable Logic Controller) systems
Communication Interfaces: Supports various communication interfaces such as Ethernet, RS-232, RS-485, and a station manager port
Processor: 300MHz Celeron microprocessor
