Early models may be equipped with Pentium® III processors up to 1.26 GHz with an advanced transfer cache of 512 Kbyte (or 512 Kbyte for some versions).
Another version may be powered by a Freescale PowerPC 7447A processor at 1.267 GHz.
Memory:
Accepts a 144-pin SDRAM SODIMM with a maximum memory capacity of 512 Mbyte (for the Pentium III version).
For the PowerPC version, up to 4GB DDR2 SDRAM is supported.
Graphics:
The built-in 815E chipset AGP graphics adapter supports high-resolution graphics and multimedia quality video with resolutions up to 1,600 x 1,200 x 256 colors (single view mode).
The display interface supports VGA and DVI-D, with a maximum resolution of 1920×1200.
Network interface:
Dual Ethernet controller, support 10BaseT and 100BaseTX, via two RJ45 connectors.
The PowerPC version features two Gigabit Ethernet interfaces with support for RJ-45 and fiber optic interfaces.
specification
Storage medium: 1GB flash memory, support for CompactFlash Type II card (for PowerPC version).
BIOS: The system and video BIOS provide flash memory in a reprogrammable manner.
Operating systems supported: ows 2000, VxWorks®, Solaris™, QNX®, LynxOS®, and Linux®.
argument
Manufacturer: General Electric (GE)
Component number: IS420UCSBH4A
Microprocessor: 1066 MHz Intel EP80579
Memory: 256 MB DDR2 SDRAM
Operating system: QNX Neutrino (Real-time multitasking operating system)
specification
Series: Mark VIe
Function: UCSB controller
Application: Mainly used in gas turbine control system
Parameters and specifications
Brand: GE General Electric
Model: F650-B-F-G-F-2-G-1-HI-E
Product Type: Multi-line feeder protection and spacer controller, or relay protection device
Operating voltage: Standard W (or standard VV)
Output frequency: Standard kHzHz, or 230Hz (for specific products)
System functions: powerful
System environment: Normal
System capability: strong
argument
Input quantity: 24 (dry contact input)
Output quantity: 12 (relay output)
Input signal level: 24 V DC
Output signal level: 24 V DC
Rated current: 10 A
Rated voltage: 250 V AC/DC
Communication interface: Two Ethernet ports (100Base-TX)
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W
Lightning protection: 4000V
Overcurrent protection: 1.5A
Surge protection function: 600W
Operating temperature: -10-70℃ (-40~+85℃ wide temperature optional)
specification
Type: Discrete input/Output (PDIO) module
Manufacturer: GE Digital
For the system: Mark VIe series turbine control system
Size and weight
Size: 230mm x 170mm x 85mm (another way of saying it is 132mm105mm52mm
Weight: 2 kg
argument
Power supply voltage: 24V DC
CPU: 32-bit PowerPC, 800 MHz
Memory: 2 MB Flash, 1 MB RAM
I/O points: 32 analog inputs, 32 analog outputs, 16 digital inputs, 16 digital outputs
Communication interface: RS-232, RS-485, CAN
Processor: 600 MHz Intel EP80579 microprocessor (another word)
Memory: 256 MB DDR2 SDRAM
specification
Type: UCSB controller module
Manufacturer: General Electric (GE)
Country of Production: United States
Ambient operating temperature: -22 to 149 degrees Fahrenheit (another way to say it)
Size and weight
Size:
260 mm x 200 mm x 80 mm (one way of saying)
6.4 inches x 8.1 inches x 1.4 inches (another way of saying this is 162.56mm x 205.74mm x 35.56mm)
Installation dimensions: Height 8.03 inches, depth 5.99 inches, width 2.17 inches (another way of saying, translated to 203.97mm x 152.13mm x 55.12mm)
argument
Input voltage: DC 24V ~ 75VDC
Max. continuous current: 20A
Output voltage: DC 24V (for some applications, such as vibration monitors)
Input current: For vibration monitors, the input current is 1.5A
Communication interface: Support RS232 communication, RS485 and CAN bus optional
specification
Functions: High reliability DC servo driver, suitable for driving hollow cup DC brushless servo motor, hollow cup DC brush servo motor, etc
Control mode: position control mode, speed control mode and torque control mode
Operation mode: Network command mode, pulse/direction mode, analog signal mode and independent operation mode
argument
Phase CT secondary coil: 5 A
Control power supply: The high control power supply is 90-300 volts direct current (VDC) and 70,265 volts alternating current (VAC) at a frequency of 48-62 Hz
Analog output: 4 to 20 mA
Fuse current rating: 2.5A, fuse type is 5x20mm HRC SLO-BLO Littelfuse, fuse type is 215-02.5
specification
Product series: 489 series generator management relay
Type: Generator management relay
Accuracy: Not explicitly mentioned, but GE products generally have a high level of accuracy
Control principle: DCS (Distributed Control System)
argument
Input voltage: Depending on the search results, the IS200JPDFG1A can operate at 24Vdc or 120Vac.
Number of fuses: There are 18 fuses, each with its own power rating.
Number of plug connectors: 14 plug connectors, including 2-bit plugs (10), 12-bit plugs (2), one 9-bit plug and one 5-bit plug.
Communication interface: System feedback such as DC bus voltage and ground fault detection may be provided via PPDA board, and RS232 interface may be supported.
specification
Function: Used as a power module to allocate DC power to the DC.
Control principle: Used with PLC (Programmable logic controller) system.
System capability: Automatic.
dimension
Overall dimensions: 5 inches deep x 5 inches wide x 6.5 inches long.
Package: Other package sizes may be available, such as 2.6×25.8x24cm
argument
SSI data Bit number: A data value that defines how many bits of a data stream, ranging from 1 to 32.
The most important point (MSB) quantity: defines the first value of the bit position of the data in the data bit stream, ranging from 1 to 32.
Number of SSI clock bits: Set the number of bits that 7264 will read from the SSI sensor per interrogation, ranges from 1 to 32, must be greater than or equal to (most important digit + (number of SSI data bits -1)), the default value is 24 bits.
specification
Rated input: 0 ~ 20 kAac
Rated output: 0 ~ 20 madc, 0 ~ 5 vdc, 4 ~ 20 madc
Accuracy: Level 1.0
Linear range: 0 ~ 120%
Isolated voltage: 5000vdc/1 minute
Auxiliary power supply: +12vdc, ±12vdc, +24vdc
Operating temperature: -20℃ ~ +60℃
Temperature drift: <300ppm/℃
argument
I/O Points: 20 universal I/O points that can be configured as digital input, digital output, analog input, or analog output.
Voltage range:
Digital input: 24 VDC
Digital output: 24 VDC
Analog input: 0-10V or ±10V
Analog output: 0-10V or ±10V
Resolution: Input/output simulation: 16 bits
Accuracy: Analog input/output: ±0.1%FS
Scanning time: <2 ms
Power supply voltage: 24 VDC
specification
Product type: Industrial automation control interface module
Size and weight
Dimensions: 90mm x 30mm x 25mm
Weight: 100g
Processor type: 600 MHz Pentium-M microprocessor.
User memory: 64 MB.
User flash: 64 MB.
Discrete I/O capacity: up to 32K bits.
Analog I/O capacity: up to 32K words.
Internal memory: 128 KB Max.
Communication ports: Two Ethernet communication ports, one RS232 port, one RS485 port, and one station manager port.
Accuracy: +/ -0.10% F.S. (for analog input/output modules).
Response time: 200ms (for analog input/output modules).
