Control function: HE693RTU900 is a low-grade machine, with basic control function and general computing power. Its working speed is relatively low, and the number of input and output modules of the band is relatively small. For example, the S7-200 produced by the German company SIEMENS falls into this category.
Configuration: Parameters such as frame protocol, baud rate, parity and stop bits of HE693RTU900 can be changed by PLC software.
Features:
Communication capability: HE693RTU900 supports communication protocols such as Modbus and can exchange data with other devices.
Configuration flexibility: The HE693RTU900 can be easily configured and changed through PLC software.
Allows direct connection of sensors: The HE693RTU900 allows the RTD temperature sensor to be connected directly to the PLC without external signal processing.
Parameters and specifications
Series: A family of universal analog input modules belonging to the GE Fanuc PACSystems RX3i PAC platform.
Input signal support: voltage, current, resistance and other input signals, and support thermocouple and resistance temperature detector (RTD).
Channel configuration: With two groups of four channels each, can be configured as any combination of input signals.
Supported signal range: including 0-20 mA, 4-20 mA, +/-20 mA current signal; +50mV, + 150mV, 0-5V, 1-5V, 0-10V, +10V voltage signal; 0 to 250/500/1000/2000/3000/4000 ohm resistance signal; PT 385/3916, N 618/672, NiFe 518, CU 426 RTD sensors; B, C, E, J, K, N, R, S, T thermocouple input.
Installation and configuration: Installed on an RX3i universal backplane, requires firmware version 2.80 or later and configured using Proficy Machine Edition (PME) version 5.0 SP1A LD-PLC Hotfix 1 or later.
Parameters and specifications
Number of channels: The module has 8 universal input channels and 2 CJC (common) channels, all input channels are divided into two equal groups.
Signal type: Support voltage, current, resistance and other input signals, including thermocouples and resistance temperature detectors (RTDS).
Data type: The data type of each channel is 16-bit integer and 32-bit floating point.
Scale transform function: The analog scale transform function is integrated, which can convert the analog signal collected into the corresponding different numerical output.
series
Series: IC695ALG600 is the analog input module of GE Fanuc RX3i series.
Resolution: The VMIVME-3122-020 has a 16-bit digital resolution.
Gain: Has program-controlled gain.
Conversion rate: Optional conversion rate.
Input channel: provides 64 differential or single channel automatic scanning functions.
Operation mode: Supports multiple operation modes, including automatic scanning, data burst, and external synchronization.
Input range: A/D converter range is ± 2.5V, ±5v, ±10v, 0 to + 5v, 0 to + 10v.
series
The VMIVME-3122-020 is a high-performance 16-bit analog-to-digital converter board from General Electric (GE) that is part of VMIC’s VMEbus analog input/output product family.
Parameters and specifications
Model: IC695CPU310-GV
Series: GE Fanuc RX3i series
CPU frequency: 300 MHz
Memory: 10 MB RAM and 10 MB flash
Supported Serial protocols: Modbus RTU Slave, SNP, and Serial I/O
LED indicators: Eight LED indicators on the front of the chassis are used to display the system status
Programming method: Support ladder diagram, structured text, C or function block diagram programming language
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Floating-point data format support: Floating-point data format is supported
Parameters and specifications
Model: IC693CPU363
Series: 90-30 series PLC system
User logical memory: 240KB
Input/output capacity: 4KB
Number of supported racks: 8
Boolean execution speed: 0.22 ms per thousand logic (Boolean contact)
Processor type: 80386X, 25MHz speed
Power required for operation: +5VDC, current 890mA
Working environment temperature: 0 to 60 degrees
Communication capability: The IC695PBM300 is a Profibus DP master module designed to communicate with up to 125 DP slave stations.
Data transfer: Supports data transfer sizes of 244 bytes input and 244 bytes output per device, and supports up to 3.584 bytes input data and 3.584 bytes output data.
Data rate: All standard data rates are supported, including 9.6 kBit/s, 19.2 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, and 12 MBit/s.
Series:
The IC695PBM300 is part of Emerson Automation’s PACSystems RX3i Programmable Automation controller (PAC) family.
