argument
Processing speed: 700 MHZ
CPU memory: 10 megabytes
Floating-point arithmetic: Supported
Number of serial ports: 3
Serial protocol: Modbus RTU slave station, SNP, serial I/O
Embedded communication: RS-232, RS-485
Ethernet ports: Two, supporting 10/100 mbps transmission rate
I/O memory: Designed to handle discrete I and Q up to 32Kbits, and analog AI and AQ up to 32K words
Block capacity: A maximum of 512 blocks, with a maximum block size of 128 KB
specification
Processor: Pentium III, 700 MHz microprocessor
Memory: 10 MB user memory (RAM) and 10 MB non-volatile or flash memory (NVRAM)
Operating frequency: 48-62 Hz
Communication interface: RS-232 program port interface, baud rate of 9600, programmable up to 19200 baud
Display: Large LCD display, can display 40 characters
specification
Rated current: 5 amp phase CT secondary coil
Protection accuracy: ±2%
Response time: ≤10 ms
Operating temperature range: -20°C to +55°C (-4°F to +131°F)
Size and weight
Dimensions: 100 mm x 70 mm x 30 mm
Weight: 0.5kg
Accuracy: Level 1.0
Linear range: 0 ~ 120%
Isolated voltage: 5000vdc/1 minute
Auxiliary power supply: +12vdc, ±12vdc, +24vdc
Operating temperature: -20℃ ~ +60℃
Temperature drift: <300ppm/℃
specification
Suitable for all kinds of electrical systems, electroplating, electrolysis industry AC high current measurement and control
Product input is saturable and Rogowski principle is adopted
Fast response time, up to us level
Product frequency response wide, up to 20khz or more
The product linearity is good, and the output linearity can reach 0.2%
The product precision is high, the overall accuracy is less than 1%
Small volume, light weight
Series: VP325 02X
Operating voltage: In some cases, such as in relation to electrical or electronic equipment, the operating voltage may be 220V (the specifics may vary depending on the application).
Output frequency: For electrical or electronic related equipment, the output frequency may be 30kHz.
Rated power: In some application scenarios, such as diesel generator sets, the rated power may be 260KW.
Size and weight
Unit size (for diesel generator set) : 2900x1120x1600mm
Net weight (for diesel generator set) : 2400kg
DAC Type: One Digital-to-Analog Integrated Circuit (IC) per channel
Analog output range: -10V to +10V
Resolution accuracy: 305 µV resolution per 1 LSB change
Voltage output build time: 1/2 LSB in 10 µs
Data latch: Double buffered data latch
Update control: Optional synchronous update control, external update control input, or software control strobe
Bus compatibility: Compatible with the VME bus
Access mode: Supports short I/O access
Control and status registers: Users can load CSRS through the processor to control board functions
Product Type: Motor Management Relay/Motor protection relay
Main functions: motor protection, monitoring, control
Input voltage: 90-300 VDC or 70-265 VAC (some say 12-48VDC)
Output voltage: 5VDC (for specific parameters only)
Output current: up to 10A (for specific parameters only)
Efficiency: greater than 90% (for specific parameters only)
Measuring function: current, voltage, frequency, power, etc
Communication interface: RS232, Modbus, PROFIBUS
Protection function: overload protection, short circuit protection, ground fault protection, stall protection, etc
Other functions: harmonic analysis, motor start-stop control, alarm recording, etc
Temperature measurement: With temperature measurement function, can monitor the motor or ambient temperature
Size and weight
Dimensions: 170mm x 105mm x 32mm (for specific parameters only)
Weight: Approx. 120g (for specific parameters only)
series
Series: Multilin 469 series
