Parameters and specifications
I/O points: Can be configured to handle any combination of discrete I/O and analog I/O, with a maximum number of 1024 discrete input, 1024 discrete output, 64 analog input words, and 64 analog output words.
Communication interface: Has a 15-pin RS-422/485 compatible serial port and a 9-pin IC66 handheld monitor port. Dedicated IC66 bus terminals that support redundancy.
Compatibility: Compatible with handheld monitors version 4.0 or later, directory number IC660HHM501G; CPU firmware version 2.0 or higher, MS-DOS programming software version 3.0 or higher, bus controller version 3.0 or higher if used with IC697 PLC module.
Size and weight
Size: According to the search results, the IC697BEM733 measures approximately 170mm x 105mm x 32mm.
Weight: About 120g.
Parameters and specifications
Processor speed: 300 MHz
Memory: 10 MB RAM and 10 MB flash
Microprocessor: Intel Celeron (Pentium III)
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Programming language: Support ladder diagram, structured text, function block diagram and C language
Execution speed: Typical execution speed is 0.195 ms /1000 Boolean instructions
Internal clock: With an internal daytime clock with a maximum deviation of 2 seconds per day and an internal timing accuracy of up to 0.01%
argument
Transmission speed: Support 153.6kbaud transmission speed, the standard configuration includes 153.6kbaud, 76.8Kbaud and 38.4Kbaud.
I/O module support: Each rack supports a maximum of eight I/O modules, a maximum of eight racks, and a total of 64 I/O modules.
Storage capacity: discrete input and output can accommodate up to 1024 points; Analog input and output memory are 128 bytes each.
Network scan: Each scan supports 128 bytes of network input and 128 bits of output.
specification
Size: Depending on the search results, the size will vary slightly. One is described as 166mm x 112mm x 36mm and the other is 170mm x 105mm x 32mm.
Weight: about 375g (one description), or about 120g (another description).
Voltage range: Input voltage range is 12-48VDC, output voltage is 5VDC, and maximum output current is 10A. There are also descriptions that mention voltage ranges including 220VDC, but this may be related to specific application scenarios.
In some messages, it is described as an analog input/output module for receiving and sending analog signals (such as current signals 4-20 mA), mounted on the Series 90-70 substrate.
Among other information, it is described as a 32-channel digital input/output (DIO) module used in GE Fanuc 90-30 series PLC systems.
Parameters and specifications
Communication rate: Supports a variety of communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption is less than 4W, with DC1500V voltage isolation and reverse protection function.
Lightning protection, overcurrent, surge protection: The electrical interface has 4000V lightning protection, 1.5A overcurrent protection and 600W surge protection.
Electrical connection: 9-pin Sub_D jack connector, pin definition according to Profibus DP protocol specification.
The IC687BEM713C is one of the modules in GE Fanuc (now GE Digital Energy) PLC (Programmable Logic Controller) family. GE Fanuc’s PLC family includes a wide range of modules and components for automation and control systems.
trait
Bus communication: IC687BEM713C is a bus transmission module designed to implement bus communication in GE Fanuc PLC systems.
Compatibility: This module may be compatible with other GE Fanuc PLC modules to support complex automation and control tasks.
Function: As a bus transmission module, it may be responsible for transmitting data and control signals between different components in a PLC system.
Parameters and specifications
Brand: General Electric
Model: IS230TCATH1A
Type: Analog (TCAT) terminal board for thermocouple input and 4-20 mA current ring
Voltage: 24V (the IS230TCATH1A module itself may not directly handle this voltage, but it is suitable for related systems)
Input power supply voltage: 125V DC (70-145V DC)
Output power supply voltage: 5V DC and 28V DC
Operating temperature: 0℃~ +55℃
Pulse rate range: 2 Hz to 14 Hz
Frame rate: up to 100 Hz
Series: IS200 series
Parameters and specifications
Brand: GE
Model: IC754VSI12CTD
Screen size: 12 inches
Resolution: 1024 x 768
Screen type: Color TFT
Processor: 1GHz ARM Cortex-A8
Operating system: Microsoft Windows Compact Embedded (CE) 6.0
Working voltage: 24V DC
Communication interface: RS232, RS485, Ethernet
Storage capacity: 32 MB (some say 128 MB, but 32 MB according to the latest information)
Power consumption: Lower than 48W
Size and weight
Size: 8 x 14 x 16 inches (some say 16 x 14 x 8 inches, but 8 x 14 x 16 inches according to the latest information)
Weight: 10 pounds
Parameters and specifications
Processor: AMD SC250 or embedded 586 processor with processing speed of 133 MHz.
User memory: 240 KB, configurable for storage.
I/O points: 2048 fixed discrete input and output points, support for up to 4096 I/ OS (different models may vary).
Global storage capacity: 1280 bits.
Register memory: can be configured from 128 to 32640 words.
System registers: 28 fixed system registers with timers and counters.
Communication speed: The embedded Ethernet controller supports communication speeds up to 100 Mbps.
Parameters and specifications
Processor speed: 1.1 GHz Atom processor
Memory: 10 MB (non-volatile flash)
Communication interface:
Embedded Ethernet interface (support SRTP, Modbus and other protocols, data transmission rate up to 10/100 Mb/s)
RS-232 serial port
RS-485 Serial port
USB-A 2.0 main port (for configuring applications and data transfer)
Block support: Up to 512 blocks are supported, each block up to 128 KB
Programming language: Support ladder diagram, structured text, C or function block diagram
Size and weight
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
Parameters and specifications
Processor speed: 1.1 GHz Atom processor
Memory: 10 MB (non-volatile flash)
Communication interface:
Embedded Ethernet interface supports 10Mb/ s and 100Mb/ s connections
RS-485 and RS-232 serial ports
The supported communication protocols include Modbus RTU Slave, SNP, and Serial I/O
Block support: Up to 512 blocks are supported, each block up to 128 KB
Programming language: Supports ladder diagram, structured text, C or function block diagram programming languages
Power requirements: 3.3 volts DC, 5 volts DC or 24 volts DC
Size and weight
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
Parameters and specifications
Type: Analog input module
Number of channels: 15 single-ended input channels
Input range: 4-20 mA and 0-20 mA input signals can be accepted
Resolution: 15 bits
Update rate: 7.5 ms
Backplane current consumption: 100 mA
Accuracy: Typical full-scale accuracy is ±0.3%, but different accuracy values may be available at specific ambient temperatures (e.g. ±0.5% at 0 ° C, ±60% at 1-0 ° C)
Operating temperature: -40 to 70°C (mentioned in some parameters)
Size and weight
Dimensions: 4.300 inches x1.956 inches x2.630 inches, also mentioned 102 x 31 x 23 mm
Weight: 100g (according to certain parameters)
