argument
Power supply: 220VAC AC.
Power range: from 50W to 3000W.
Communication interface: Support USB, RS232, RS485 and CAN bus communication.
Protocol support: Supports MOTECIAN, MODBUS, and CANOPEN protocols.
Operating system: QNX operating system.
specification
Type: Intelligent servo drive, which is also the main trip package for the main turbine of the Mark VI system.
Function integration: Integrated PLC and motion controller, support ladder diagram programming.
Control mode: Position control mode, speed control mode and current (torque) control mode.
Operation mode: includes network operation mode, pulse/direction mode, analog signal mode and independent programmable mode.
Advanced features: Built-in S-curve and T-curve trajectory planning function, support multi-segment trajectory continuous motion.
Parameters and specifications
Processor: Uses an 80386EX processor with a speed of 25MHz.
Memory: The maximum user program memory is 32K bytes.
Scan rate: The typical scan rate of a CPU is 0.22 ms /K.
Communication interface: Equipped with a built-in serial port supporting SNP/SNP-X slave protocol and a LAN port supporting multipoint, Ethernet, FIP, Profibus, GBC, GCM and GCM+ option modules.
Power requirements: 670 MA from +5 VDC power supply required.
Function support: Support shift register, override, battery backup clock, PCM/CCM compatibility, periodic subroutine interrupt function, floating point math, RAM and flash storage.
Parameters and specifications
Type: GE PLC module, part of the RX7i series.
Processor: The module is equipped with a 600 MHz CPU (central processing unit) and is equipped with a Pentium-M microprocessor.
Memory: 64 MB of user memory and user flash memory.
Communication: Supports communication with I/O and smart options modules via a rack-mounted backplane in the VME64 standard format. It is also equipped with an embedded Ethernet port and a serial port of the SNP slave protocol for communication with other devices.
Power supply: The specific power supply voltage may vary depending on the application, but the general industrial PLC module will support the standard industrial voltage range.
Storage: Includes battery-encapsulated user memory and non-volatile flash memory for data to prevent data loss.
Parameters and specifications
Application: Mainly used for transformer monitoring and maintenance.
Functions: Detect internal transformer faults, monitor transformer oil moisture and hydrogen, provide real-time alarm and alarm history.
Technical features:
Optical fiber sensing technology, real-time monitoring of moisture and hydrogen inside the transformer.
RS485, Modbus, DNP3.0 and other communication interfaces, easy to communicate with other devices.
Built-in data storage to store historical data and event records.
Programmable alarm function to set multiple alarm types and alarm levels.
Software upgrade function, upgrade software version at any time.
Input voltage range: 12-48VDC, additional information indicates a voltage of 24V, which may vary by product model or configuration.
Current: 100-400A (This information may be specific to some application scenarios or configurations, as not all descriptions mention the current parameter).
Size and weight
Size: There are two different size information, which may be the difference caused by different models or configurations. One is 260mm x 150mm x 100mm and the other is 170mm x 105mm x 32mm.
Weight: There are also two types of information, one is 2.5kg and the other is about 120g, which may also reflect differences between different models or configurations.
Parameters and specifications
Processor: Freescale 8349,667 MHz processor.
Operating system: Runs on the QNX operating system.
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts.
Operating temperature: between 0 and 65 degrees Celsius.
Cooling method: Natural cooling, no fan required.
Application level: complies with NFPA Class 1 zone 2 specifications.
Communication interface: including Ethernet interface, serial port, etc., used for data exchange with other devices, control systems or networks.
Size and weight
Dimensions: Height is 34mm (door thickness is 33mm).
Weight: Approximately 0.8KG.
Parameters and specifications
Processor type: 600MHz Pentium-M microprocessor.
Memory: 64 MB user memory and 64 MB user flash memory, both battery powered.
Boolean execution speed: The Boolean execution speed is 0.069 milliseconds per 1000 Boolean contacts/coils.
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O.
Number of blocks: Up to 512 blocks can be downloaded to this CPU, each with up to 128 KB of memory.
Communication interface:
Two Ethernet communication ports support automatic detection of network transmission speed and can be configured for half-duplex and full-duplex operation modes.
One RS232 port.
One RS485 port.
A station manager port.
Parameters and specifications
Processor type: 600MHz Pentium-M microprocessor.
Memory: 64 MB user memory and 64 MB user flash memory, both battery powered.
Boolean execution speed: The Boolean execution speed is 0.069 milliseconds per 1000 Boolean contacts/coils.
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O.
Number of blocks: Up to 512 blocks can be downloaded to this CPU, each with up to 128 KB of memory.
Communication interface: Two Ethernet communication ports (which support automatic detection of network transmission speed and can be configured for half-duplex and full-duplex operation modes), one RS232 port, one RS485 port, and one station manager port.
Supported protocols: SRTP, Modbus TCP server and client, Ethernet Global Data (EGD), Modbus RTU slave station, SNP, Serial I/O.
Parameters and specifications
Type: GE (General Electric) digital quantity input card module.
Use: Commonly used in industrial automation and control systems, allowing digital signals to be input into the control system to monitor and control different equipment and processes.
Communication capability: With a communication interface, you can communicate with other control devices and industrial networks to achieve data sharing and monitoring.
Modbus operation: Performing a combination of one read and one write operations in a single Modbus transaction can write to one set of 4 registers and return the contents of another set of 4x registers.
Rated voltage range: The rated voltage of DS200DCFBG1B may vary depending on the application. For example, it is mentioned that the rated voltage is between 38 and 115 VAC, and it is also mentioned that the power supply voltage is 24 VDC.
Input voltage range: For example, the DS200DCFBG1BJB has an input voltage range of 12-48VDC.
Output voltage and current:
Output voltage range: DS200DCFBG1BGB’s output voltage range is 5 VDC to 24 VDC.
Output current: The output current of the DS200DCFBG1BGB is 2 A/ channel, while the output current of the DS200DCFBG1BJB is up to 10A.
Frequency: The frequency of the board depends on the input voltage, but ranges from 0 to 500 kHz.
Communication protocol: Supports common communication protocols such as Modbus RTU.
argument
Power supply voltage:
24V DC (mentioned in some materials)
28V DC (another way to say it)
Can operate in 18V to 32V DC range
CPU: 32-bit PowerPC, 800 MHz (mentioned in some materials)
Another mentioned the use of a 600 MHz Intel EP80579 microprocessor
Memory:
2 MB Flash, 1 MB RAM (mentioned in some materials)
4 GB DDR3-1333 SDRAM (another way to say it)
256 MB DDR2 SDRAM (mentioned in another source)
I/O count: 32 analog inputs, 32 analog outputs, 16 digital inputs, 16 digital outputs (mentioned in some materials)
specification
Memory: 64 MB user memory and 64 MB user flash memory
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O
Communication ports: Two Ethernet communication ports, one RS232 port, one RS485 port, and one station manager port
Response time: 200ms (for some specific operations, such as analog input/output)
Accuracy: +/ -0.10% F.S. (for analog input/output)
specification
Processing power: Powerful processing power, able to handle complex control logic and data processing tasks
Storage capacity: Contains memory modules for storing programs and data to support the running of the application
Communication capability: Supports a variety of communication interfaces, including Ethernet, serial ports, etc., which can be used to communicate with other devices and systems
