Rated Voltage: 230V AC
Rated Current: 15A
Control Voltage: 24V AC/DC
Power: 3.45kW (estimated)
Contact Form: 3NO (Normally Open)
Type: AC Contactor
Model: IS215VPROH1BD
Brand: GE
Installation Method: Rail Mounting
Input Voltage: 24VDC or 125VDC
Output Voltage: 24VDC
Maximum Output Current: 10A
Operating Temperature Range: -40°C to 70°C
Product Size: 120mm x 60mm x 80mm
Product Weight: 0.5kg
Sampling Period: 100ms
Redundancy: Dual power supply and processor
Maximum I/O Points: 384
Communication Protocols: Modbus, Ethernet, OPC
Manufacturer: GE Fanuc
Series: 90-30 Series or RX3i Series (Depending on specific model)
Processor: 1 GHz, possibly Intel Celeron-M microprocessor
Voltage: 24V (for some models)
Current: 100-400A (for some models)
Operating Temperature: 0 to 60°C (32 to 140°F)
Power Consumption: +5V@250mA, +3.3V@10mA
Communication Protocol: Modbus
Processor: Intel Atom
Memory: 2GB DDR3
Storage: 32GB SSD
Input Voltage: 24V DC
Operating Temperature: -20℃ to 60℃
Communication Rate: 9600bps
Measurement Range: 0~5000ppm (if applicable to specific use case)
Input Voltage Range: 200V-400V
Output Voltage: 24V DC
Output Current: 8A
Operating Temperature: -40℃ to +85℃
Dimensions: 148mm x 84mm x 39mm (length x width x height)
+3.3 volts DC: 1.0 amp nominal value.
+5 volts DC: 1.2 amps nominal value.
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).
Communication interface:
Contains at least two serial ports, such as an RS-232 port and an RS-485 or RS-486 port.
Other communication protocols may also be supported, such as Modbus RTU slave, SNP, etc.
Measurement Method: Karl Fischer Coulomb (coulometric) method
Display: 4-digit LED digital display
Readout Unit: μgH2O
Electrolysis Current: 0-300mA automatic contro
Measurement Range: 5μg-80mg (H2O)
Sensitivity Threshold: 1μgH2O
Accuracy: ±0.3% for 5μg-1mgH2O (excluding sampling error); ±0.5% for above 1mgH2O
Input voltage: 110V-380V
Current: 1A-30A
Power: 5W-130W
Running speed: 2 Gb/s, which can realize fast data exchange between connected devices
Number of supported nodes: Up to 256 nodes are supported in a network
Operating temperature range: -40℃-+85℃
Relative humidity: 5%-95%
Output signal: voltage output
Automatic bypass function: Automatically bypass defective or disconnected nodes when signal loss or loss of effective synchronization mode is detected
Control power supply: 70-265 VAC, 90-300 VDC control power supply.
Output and protection function: with overload, short circuit and phase loss protection function, can cut off the power supply in time when the motor or circuit is abnormal, to protect equipment and personal safety.
Communication interface: Support RS-232 communication interface, with 9600 baud rate, programmable to 19200 baud rate.
Input voltage: 70-265VAC.
Analog output: 4 to 20mA.
Display: Enhanced display (10Base-T).
Protection level: IP20.
Size: 21.8×22.8x25cm (according to the product label).
Weight: About 7.32 kg.
Model Number: IC754VSI06STD-LH
Brand: GE
Control Principle: Other
Purpose: Automation Control Display
Range: 110-210
Accuracy: 0.2-0.9
Dimensions: 12-50mm
Working Voltage: 220V
Output Frequency: 100kHz
Input Voltage: Typically ranges from 4-20 mA.
Output Voltage: Typically ranges from 0-20mA.
Working Current: Typically ranges from 0-200mA.
Voltage: 24V.
Current: 100-400A.
Weight: Approximately 2KG.