Grid view List view

Showing 289–300 of 3716 results

GE IS200JPDEG1ABB

¥999.00

Product Parameters

Parameter Category Specific Specifications
Brand & Model GE IS200JPDEG1ABB
Compatible System GE Mark VIe Distributed Control System
Operating Voltage 24VDC (±10% tolerance)
Operating Temperature Range -40°C to 75°C
Signal Type Support Analog (4-20mA, 0-10V), Digital (DI/DO, 24VDC)
Communication Protocols Profinet, Modbus TCP, Ethernet/IP, DNP3
Power Consumption ≤12W (Typical); ≤18W (Max Load)
Physical Dimensions 135mm × 82mm × 58mm (L×W×H)
Protection Level IP20 (Panel Mount)
Mean Time Between Failures (MTBF) ≥120,000 Hours
Certifications CE, UL 508, CSA C22.2 No. 14, IEC 61010
Terminal Type Spring-Clamp Terminals (0.5-2.5mm² Wire Gauge)

GE IS200JPDDG1AAA

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IS200JPDDG1AAA
Operating Voltage 24V DC (±15% voltage tolerance)
Operating Temperature Range -40°C to +75°C
Signal Type Digital Input (DI) / Digital Output (DO)
Digital Input Channels 40 channels (configurable as sinking or sourcing)
Digital Output Channels 20 channels (relay output, 3A per channel)
Communication Protocols Ethernet/IP, Modbus TCP, GE Speedtronic, Profinet
Power Consumption Maximum 16W under full load
Physical Dimensions 120mm × 85mm × 43mm (L × W × H)
Protection Level IP20 (for control cabinet installation)
MTBF (Mean Time Between Failures) ≥ 125,000 hours
Certifications IEC 61131-2, UL 508C, CE, RoHS compliant

GE IS200JPDBG1A

¥999.00

Product Parameters

Parameter Category Specific Specifications
Brand & Model GE IS200JPDBG1A
Compatibility GE Mark VIe Distributed Control System
Operating Voltage 24VDC ±10%
Operating Temperature Range -40°C to 70°C
Input/Output Signals Supports analog (4-20mA) and digital (DI/DO) signal processing
Communication Protocol Profinet, Modbus TCP, Ethernet/IP
Power Consumption ≤15W (Typical Load)
Physical Dimensions 140mm × 85mm × 60mm (L×W×H)
Protection Level IP20 (Panel Mounted)
Mean Time Between Failures (MTBF) ≥100,000 Hours
Certification CE, UL, CSA

GE IS200JPDDG1A

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IS200JPDDG1A
Operating Voltage 24V DC (±15% wide tolerance)
Operating Temperature Range -40°C to +70°C
Signal Type Digital Input/Output (DI/DO)
Digital Input Channels 32 channels (sinking/sourcing configurable)
Digital Output Channels 16 channels (relay output, 2A per channel)
Communication Protocols Ethernet/IP, Modbus TCP, GE Speedtronic Protocol
Power Consumption Maximum 14W under full load
Physical Dimensions 115mm × 82mm × 42mm (L × W × H)
Protection Level IP20 (control cabinet mounting)
MTBF (Mean Time Between Failures) ≥ 110,000 hours
Certifications IEC 61131-2, UL 508C, CE, RoHS compliant

GE IS200ISBDG1AAA

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IS200ISBDG1AAA
Operating Voltage 12-24V DC (wide-range input)
Operating Temperature Range -40°C to +75°C
Signal Type Support Analog (4-20mA, 0-10V), Digital (DI/DO), and Serial Signals
Communication Protocols Ethernet/IP, Modbus RTU/TCP, Profinet, and GE Proprietary Protocols
Power Consumption Max 12W under full load
Physical Dimensions 110mm × 75mm × 40mm (L × W × H)
Protection Rating IP21 (dust-proof, drip-proof)
Mean Time Between Failures (MTBF) ≥ 120,000 hours
Certifications IEC 61131-3, UL 61010-1, CE, and RoHS compliant
Interface Ports 2 Ethernet ports, 8 analog input ports, 16 digital I/O ports, 1 RS485 port

GE IS200EPSMG1A

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial Power Supply & System Monitoring Integrated Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Power Supply Capacity 6 isolated power output channels, 24 V DC, 3 A per channel (total maximum load: 12 A)
Power Regulation Accuracy ±0.3% of output voltage (24 V DC)
Monitoring Capabilities Power voltage/current monitoring (per channel), module temperature monitoring, backplane communication status monitoring, fault alert generation
Alert Output 2 digital alarm channels + backplane data alerts for Mark VIe DCS
Communication Interface Mark VIe high-speed backplane bus; 1 x USB 2.0 configuration port
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Input Power Requirement 24 V DC (from Mark VIe main power supply, input range: 19 – 29 V DC)
Module Power Consumption 6.8 W (typical, excluding distributed power)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 0.96 kg
Protection Features Over-voltage protection, over-current protection, short-circuit protection, thermal shutdown, EMI shielding, surge protection (up to 2.2 kV)
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC
MTBF (Mean Time Between Failures) 2,050,000 hours

GE IS200EPCTG1A

¥899.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IS200EPCTG1A
Operating Voltage Range 24V DC ±10%
Operating Temperature -40°C to +70°C
Input/Output Signals Supports analog input (4 – 20mA) and digital input/output signals
Communication Protocols Compatible with Modbus, Ethernet/IP, and GE’s proprietary control protocols
Power Consumption Maximum 15W under full load
Physical Dimensions 120mm × 80mm × 45mm (L × W × H)
Protection Level IP20 (for control cabinet installation)
MTBF (Mean Time Between Failures) ≥ 100,000 hours
Certification Complies with IEC 61131 – 2, UL 508, and CE standards

GE IS200EPBPG1ACD

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial Power Backplane & Communication Gateway Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Power Distribution 8 isolated power output channels, 24 V DC, 4 A per channel (total max load: 16 A)
Power Regulation Accuracy ±0.4% of output voltage (24 V DC)
Communication Gateway Functions Protocol translation, cross-module data routing, backplane-to-external network bridging
Supported Protocols Ethernet/IP, Modbus TCP, OPC UA, GE SRTP, IEC 61850
Communication Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (RJ45), 1 x Mark VIe backplane expansion port
Redundancy Support Power channel redundancy (N+1), communication port hot standby, failover ≤ 50 ms
Communication Interface Mark VIe high-speed backplane bus (16-bit parallel bus)
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Input Power Requirement 24 V DC (from Mark VIe main power supply, input range: 19 – 29 V DC)
Module Power Consumption 7.8 W (typical, excluding distributed power)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 1.02 kg
Protection Features Over-voltage protection, over-current protection, short-circuit protection, thermal shutdown, EMI shielding, surge protection (up to 2.2 kV)
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC, IEEE 802.3 compliant
MTBF (Mean Time Between Failures) 2,150,000 hours

GE IS200EMIOH1ACA

¥999.00

Product Parameters

  1. Module Type: Multi-function mixed I/O module, exclusive to GE Mark VIe Distributed Control System (DCS)
  2. Channel Configuration: 8 analog input channels + 16 digital input channels + 8 digital output channels, optimized for mixed-signal industrial workflows
  3. Analog Input Specifications: 4-20 mA / ±10 VDC configurable inputs, 16-bit resolution; compatible with temperature sensors, pressure transmitters, and flow transducers
  4. Digital Input Specifications: 24 VDC sinking/sourcing inputs, input response time < 500 µs; compatible with limit switches, proximity sensors, and safety interlocks
  5. Digital Output Specifications: 24 VDC solid-state (MOSFET) outputs, 0.5 A per channel, 4 A maximum per module; short-circuit and thermal protected
  6. DCS Compatibility: Fully compatible with GE Mark VIe controllers, I/O racks (IS200IRTDH1B), backplane power supplies (IS200BPPBH2B), and software (ToolboxST, CIMPLICITY)
  7. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), resilient to extreme industrial temperature fluctuations
  8. Power Consumption: 3.2 W (typical) at 24 VDC input, 3.9 W (max), energy-efficient for 24/7 continuous operation
  9. Physical Dimensions: 130 mm × 80 mm × 110 mm (5.12 in × 3.15 in × 4.33 in), rack-mountable in GE Mark VIe standard I/O cabinets
  10. Certifications: UL 508, CE, IEC 61131-2, ATEX (Zone 2), IEEE 1613, and IEC 62443 compliant, meeting global safety and cybersecurity standards
  11. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid industrial settings
  12. Protection Features: Built-in ESD protection (±10 kV contact, ±15 kV air), surge protection (±2 kV) for analog inputs, channel-to-channel isolation (250 VAC)
  13. Diagnostic Capabilities: Channel-level fault detection, analog signal drift monitoring, digital open/short circuit alerts, and LED indicators for module and channel health
  14. MTBF: Exceeds 210,000 hours, ensuring long-term reliability in mission-critical DCS applications
  15. Signal Conditioning: Integrated low-pass filtering for analog channels to reduce electromagnetic interference (EMI) from industrial machinery

GE IS200EMIOH1A

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial Mixed Analog-Digital Input/Output (I/O) Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Analog Input Channels 8 differential channels, supports 4-20 mA DC, 0-10 V DC, PT100 RTDs
Analog Output Channels 4 differential channels, supports 4-20 mA DC, 0-10 V DC
Digital Input Channels 16 isolated channels, 24 V DC (sinking input), 5 mA per channel
Digital Output Channels 16 isolated relay channels, 2 A @ 250 V AC / 2 A @ 30 V DC per channel
Signal Accuracy Analog: ±0.1% of full scale; Digital: Response time ≤1 ms (input), ≤5 ms (output)
Isolation Level Channel-to-channel isolation (500 V AC, 1 minute); Field-to-system isolation (1000 V AC, 1 minute)
Communication Interface Mark VIe high-speed backplane bus
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Power Supply Requirement 24 V DC (from Mark VIe backplane)
Power Consumption 6.5 W (typical)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 0.98 kg
Protection Features Over-voltage protection, over-current protection, short-circuit protection, EMI shielding, surge protection (up to 2 kV)
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC
MTBF (Mean Time Between Failures) 1,950,000 hours

GE IS200EISBH1A

¥999.00

Product Parameters

  1. Module Type: Integrated industrial safety interlock module, exclusive to GE Mark VIe Distributed Control System (DCS)
  2. Channel Configuration: 24 safety interlock input channels + 16 safety output channels, optimized for personnel and equipment protection workflows
  3. Input Specifications: 24 VDC sinking/sourcing safety inputs, input response time < 200 µs; compatible with safety door switches, emergency stop (E-Stop) buttons, light curtains, and two-hand control devices
  4. Output Specifications: 24 VDC solid-state (MOSFET) safety outputs with fail-safe mode (de-energized on module fault), 0.8 A per channel, 6 A maximum per module; short-circuit, overload, and thermal protected
  5. Safety Compliance: SIL 2 certified, compliant with EN ISO 13849-1 and IEC 61508 standards for safety-related control systems
  6. DCS Compatibility: Fully compatible with GE Mark VIe controllers, I/O racks (IS200IRTDH1B), backplane power supplies (IS200BPPBH2B), and safety software (ToolboxST, CIMPLICITY)
  7. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), resilient to extreme industrial temperature fluctuations
  8. Power Consumption: 3.5 W (typical) at 24 VDC input, 4.2 W (max), energy-efficient for 24/7 continuous safety monitoring
  9. Physical Dimensions: 130 mm × 80 mm × 110 mm (5.12 in × 3.15 in × 4.33 in), rack-mountable in GE Mark VIe standard I/O cabinets
  10. Certifications: UL 508, CE, IEC 61131-2, ATEX (Zone 2), IEEE 1613, IEC 62443, and SIL 2 compliant, meeting global safety and cybersecurity standards
  11. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid industrial settings
  12. Protection Features: Enhanced ESD protection (±12 kV contact, ±15 kV air), surge protection (±2.5 kV), channel-to-channel isolation (500 VAC), and reverse-polarity protection
  13. Diagnostic Capabilities: Safety interlock fault logging, channel-level status monitoring, fail-safe mode alerts, and LED indicators for safety input/output states
  14. MTBF: Exceeds 230,000 hours, ensuring long-term reliability in mission-critical safety applications
  15. Redundancy Features: Cross-channel redundancy for critical interlock functions, module health self-diagnostics, and fault signal output for DCS safety alarms

GE IS200EHPAG1A

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial High-Power Gigabit Ethernet Communication Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Communication Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (RJ45), auto-negotiation and full-duplex support
Network Redundancy Built-in Hot Standby redundancy, automatic failover ≤ 50 ms
Supported Protocols Ethernet/IP, Modbus TCP, OPC UA, GE SRTP, IEC 61850, DNP3
Data Transfer Rate Up to 1 Gbps
Power Distribution 4 isolated power output channels, 24 V DC, 5 A per channel (total maximum load: 15 A)
Power Regulation Accuracy ±0.3% of output voltage (24 V DC)
Communication Interface Mark VIe high-speed backplane bus
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Input Power Requirement 24 V DC (from Mark VIe backplane, input range: 19 – 29 V DC)
Module Power Consumption 8.2 W (typical, excluding distributed power)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 1.1 kg
Protection Features Over-voltage protection, over-current protection, short-circuit protection, thermal shutdown, EMI shielding, surge protection (up to 2.5 kV)
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC, IEEE 802.3 compliant
MTBF (Mean Time Between Failures) 2,200,000 hours