argument
Memory Capacity: 16MB SDRAM reflected memory
Operating voltage: +5VDC
Current requirement: 1.8 amps
Data transfer rate:
Maximum network transfer rate: 43 MB/ s (4-byte packets) to 174 MB/ s (64-byte packets)
Data transfer speed: 2.12 Gbaud
Transfer rate range: 6.2 megabytes per second to 3.2 megabytes per second (depending on the density of redundant information)
Dynamic packet size: 4-64 bytes
Number of nodes supported: Up to 256 nodes per network
Maximum transmission distance: 300 meters (or 984.25 feet) of multimode fiber media
specification
Module type: Control memory switch module
Platform: PACSystems RX7i platform
Manufacturer: Currently owned by Emerson Automation, it was previously manufactured by GE Intelligent Platforms (GE IP)
Slot requirements: Need to be installed on the mainframe and connected to slot 3 or 4
Interface type: LC optical fiber port
argument
Operating voltage: Standard VV (but the specific voltage value is not explicitly given in the search results)
Output frequency: standard kHz (but the specific frequency value is not explicitly given in the search results)
Automatic bypass function: The AC-5595 automatically bypasses the port to detect patterns when there is a lack of synchronization
specification
Product Type: Relay module/port multi-mode reflective memory switch
Application: Widely used in industry, electrical control, power system protection, industrial automation, automation system, manufacturing, building automation, traffic signal system and other fields
Transmission speed: As a reflected memory switch, the transmission speed of its fiber reflected memory network is 170Mbyte/s
Node support: A maximum of 256 nodes are supported
Working baud rate: When working as an RFM board, the working rate is 2.1G baud rate
Parameters and specifications
Model: 369-HI-R-M-0-0-0-E
Manufacturer: GE Multilin
Function: comprehensive relay protection and control
Application: motor protection, control and monitoring
Main functions:
Protect the motor from over current, under current, over voltage, under voltage, ground fault, short circuit and other electrical faults
Provide real-time monitoring of motor running status, including current, voltage, power, frequency and other parameters
Supports event recording and fault analysis
Users can customize the logical functions
Supports multiple communication protocols (such as Modbus, DNP3, etc.)
Equipped with LCD display and buttons for easy field operation and parameter setting
Modular design, support for expanded I/O modules
Size and weight
Dimensions: Width is about 11 cm, height is about 30 cm, length is about 21 cm
Weight:
The box weighs 10 pounds
Parameters and specifications
Type: The product is available in a variety of possible types, including racks, flame sensors, power expanders, flame detectors, or communication redundant excitation modules.
Material: If it is a frame, the material is steel.
Size: For a rack, the dimensions may be 48x24x72 inches. Please note, however, that this size may not work for other types of products.
Weight capacity: If it is a rack, the weight capacity is up to 2,000 pounds.
Other parameters: For a flame sensor or flame detector, this may include the sensor material (such as silicon carbide SiC), operating temperature range, sensitivity, etc.
Size and weight
Frame: 48x24x72 inches, weight capacity 2000 LBS.
argument
Number of entries: 24
Input type: dry contact
Input signal level: 24 V DC
Output quantity: 12
Output type: Relay output
Output signal level: 24 V DC
Rated current: 10 A
Rated voltage: 250 V AC/DC
Communication interface: Two Ethernet ports (100Base-TX)
Power supply: 24V DC
Minimum rated voltage: 27.4 VDC, rated voltage is 28.0 VDC
Operating voltage: It may vary depending on the specific configuration, but general industrial I/O modules have a wide range of operating voltages, such as 180V or 220V
Interface: Supports a variety of fieldbus interfaces such as SRTP and Modbus TCP/IP
Communication: Built-in Ethernet user supports communication
specification
Use: Provides direct interface to specific turbine field equipment, improves operational reliability and reduces long-term maintenance
Compatibility: Usually used in conjunction with TREAH_A terminal boards for emergency trip applications in aero-modified turbines
Wiring limits: Field wiring limits with voltage detection, 18 AWG wiring limited to 1,000 feet of cable length
Size and weight
Size: 9cm×10.3cm×10cm
Weight: 2.6kg, but there are also reports of a weight of 1.6kg
argument
Rated voltage: 90 to 300 VDC, 70 to 265 VAC @ 48-62 Hz
Winding current: Two windings per phase, each providing 5A, each ½ and <s:1> also providing 5A
Ground current input rating: For the G5 option, winding 1/2 and winding 2/3 are equal to 5A
specification
Brand: General Electric
Type: High speed transformer protection relay
Main uses: Used for the protection and management of various transformers in power systems, such as power plant transformers, substation transformers, industrial transformers and distribution transformers
Size and weight
Dimensions: Module dimensions are 200mm x 200mm x 150mm
Weight: 5kg
Operating temperature range: Depending on the source, it may be -40 ° C to +85 ° C or -25 ° C to 70 ° C.
Network transfer rate: 43 Mbyte/s (4-byte packet) to 170 Mbyte/s (64-byte packet).
Serial rate: 2.12 Gbaud.
specification
Input voltage: 5VDC (but another message states that the input voltage range is 10-30VDC and the output voltage is 24VDC).
Power consumption: 10W (but another message states that the output power is 360W, which may refer to the power of the entire system or module, not the power consumption of the card alone).
Size:
6U VMEbus form factor (a standard size).
Another message gives a specific size of 96mm x 48mm x 16mm, but this could be the size of one of the components on the card.
There is also a message indicating that the external dimensions are 36.3cm x 19.6cm x 20.6cm, which may refer to the dimensions of the entire module or case containing the card.
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts.
Operating temperature: between 0 and 65 degrees Celsius.
specification
Communication interface: Usually equipped with a communication interface, such as Ethernet, to facilitate communication and remote monitoring with the host computer or other devices.
Protection function: including overload protection, short circuit protection, undervoltage protection, etc., to ensure the safe operation of the motor.
Front panel ports: Includes six female jack connectors, a USB port, and multiple LED indicators.
Size and weight
Dimensions: Specific dimensions are not provided directly, but it is mentioned that the height of the front panel is 34mm and the thickness of the door panel is 33mm.
