Model : IC695CPL410
processor : 1.2GHz AMD G Series Quad Core
operating system : VxWorks (some documents also support Linux)
power requirement : Maximum input power 20W, input voltage range 18-30VDC
display : OLED
Security features : Secure Boot and Trusted Platform Module (TPM)
certification : Marine ABS, DNV-GL, BV, LR
Brand and model: IS220PAICH1B module of GE brand.
Operating voltage: Usually 280V.
Output frequency: 620kHz.
Product certification: Qualified.
Size: The exact size information is not explicitly provided, but it may be close to the 8.2×12.2x6cm (width x depth x height) specification.
Weight: Some data indicate that its weight is 1.2kg, and some data mention that the weight is 2KG.
Voltage: According to some sources, the operating voltage range may be 99V to 242V AC, but please note that other voltage versions or customization options may also exist.
Power consumption: ≤50VA.
Overall size: 310mm(W)×147mm(H)×269mm(D).
Net weight: about 3.6kg.
Model: IS200SDIIH1ADB.
Manufacturer: General Electric.
Series: Mark IV series.
Features: It is part of the PACSystem RX7i Programmable Automation Controller (PAC) platform that supports data exchange over Ethernet networks, remote I/O implementation, and communication with visualization systems and third-party software and tools.
Ports: Has two Ethernet ports capable of transmitting data at 10/100 Mbps communication speed and has automatic sensing function.
Dimensions: Height 8.25cm x width 4.15cm (or, alternatively, length 8.5 inches x width 8.1 inches).
Processor: 32-bit processor based on ARM kernel, with powerful data processing capabilities and high-speed signal acquisition and processing functions.
Storage: The use of large-capacity FLASH flash memory chip to achieve ultra-long-term data storage to ensure data integrity and reliability.
Input/output: Support a variety of signal inputs, such as standard current, voltage, thermocouple, thermal resistance, etc., without replacing the hardware, through the instrument configuration.
Dimensions: 170mm x 105mm x 32mm.
Weight: About 120g.
Usage: GE IS200TBAIH1C is commonly used to distribute power and is suitable for emergency shutdown protection systems of all sizes.
Processing power: This module has large processing power and can handle up to 4000 + I/O points.
Communication interface: An interface that supports communication with other system components or devices.
Redundant fault-tolerant design: The control system adopts a redundant fault-tolerant control system platform based on TRICON triple module redundancy (TMR) structure, with three main processors, all I/O signals are triple designed to ensure the redundancy fault-tolerant function of the system.
Processor: This module uses a Celeron PPG processor with a specific model of 366 MHz.
Memory: Onboard 64 MB SDRAM memory, including 64 MB flash memory card.
Network interface: The module supports 10BaseT and 100BaseTX interfaces.
Extensibility: Two high-performance 16550 compatible serial ports, PS/2 style keyboard and mouse ports on the front panel.
Module type: As an analog I/O Pack, it is responsible for handling analog signal input and output, enabling communication with sensors and actuators.
System Compatibility: The module is compatible with GE Mark VI series control systems and can be used in both small applications and large integrated systems.
Dimensions: Its dimensions are approximately 34 x 18 x 10 cm.
Weight: The weight is about 0.82 kg.
Model Number: IC698CMX016
Manufacturer: GE Automation (previously GE Fanuc Automation or GE Intelligent Platforms)
Series: PACSystems RX7i
Memory Capacity: 16 MB of reflective memory with parity checking
Communication Interface: LC fiber-optic port supporting 2.12 Gbaud data transmission
Maximum Nodes: Supports up to 256 nodes through FO cable daisy-chain connection
Data Transmission Rate: Ranges from 43 MB/s for 4-byte packets to 174 MB/s for 64-byte packets
Input Voltage: 24VDC or 125VDC
Output Voltage: 24VDC
Power Supply: Typically requires 24V DC input.
Input Type: Supports DC, AC, and digital signals.
Input Quantity: 16 inputs.
Operating Temperature Range: -40℃ to +85℃.
Communication Protocol: Uses standard Modbus communication protocol for seamless integration with other devices.
Dimensions: 120mm x 100mm x 30mm.
Weight: Approximately 0.2kg.
Voltage: 24V
Current Range: 100-400A
Weight: 2KG
Series: EX2100 Series
Classification: GE Control Layer Module
Size: Exact dimensions might vary, but typical modules have a standard set of dimensions. Contact GE or a reliable supplier for precise measurements.
Weight: 2KG
Model: IS215UCVEH2AE
Working Voltage: AC 100V-240V
Power: 10W
Operating Temperature: -20℃ to +60℃
Storage Temperature: -40℃ to +80℃
Humidity: 20% to 95%
Dimensions: 100mm x 50mm x 25mm
Weight: It is not specifically mentioned in the provided information, but it is likely to be within a standard range for similar modules.