Receives engineering unit output data (BIU) from the bus interface.
Other parameters:
Parameters such as operating temperature, storage temperature, and ambient humidity may vary depending on the application scenario, but are generally applicable to industrial environments.
Size and weight
Dimensions: 149.2 x 44.45 x 115.6 mm (5.875 x 1.75 x 4.55 inches).
Weight: Not given directly, but based on size and material, it is likely to be around a few hundred grams to a kilogram.
series
Part of GE Fanuc’s (now Emerson) family of Genius field control stations.
Input voltage range: The input voltage range varies depending on the source. One says 18 to 30 VDC, another says 12 to 48VDC, and still another says DC 9 to 36V (probably referring to a wide power input range).
Backplane current: 170 mA per channel
specification
Number of channels: 8 single-ended analog voltage outputs
Anti-noise isolation channel: supported
Field configuration: Flexible Settings
Data types: Use both word and bit data types
Calibration: Can be recalibrated on site or reset to factory calibration
Size and weight
Size: Sizes vary depending on the source. One said it was 149.2 x 44.45 x 115.6 mm (5.875 x 1.75 x 4.55 inches) and another said it was 170mm x 105mm x 32mm
Weight: About 120g
argument
Type: Bus interface module or circuit breaker
Rated voltage: 600V AC (when used as circuit breaker)
Rated current: 50A (as a circuit breaker)
Number of poles: 2 (when used as a circuit breaker), but there is also talk of 3 poles
Interrupt rating: varies according to voltage, e.g. 10kAIC at 240V AC, 5kAIC at 480V AC, 3kAIC at 600V AC (when used as a circuit breaker)
Frequency: 50/60 Hz
specification
Manufacturer: General Electric (GE)
Model: 8502-BI-DP
specification
Model: SR469-P5-HI-A20.
Manufacturer: GE Multilin.
Size and weight
Size:
Approximately 100 mm x 70 mm x 30 mm (L x W x H).
10 x 7.6 x 1.2 inches (according to a specific description).
Weight:
0.5 kg (according to a specific description).
Approximately 1.2kg (according to a specific description).
7.32 kg (another specific description).
Parameters and specifications
Type: Relay module/Reflected memory switch
Brand: GE (US General Electric)
Operating voltage: standard VV
Output frequency: standard kHz
Interface mode: RS-232
Supported protocol: Modbus
Power supply: Normal
Automatic bypass port: Pattern detected when synchronization is missing
argument
Processing speed: 700 MHZ
CPU memory: 10 megabytes
Floating-point arithmetic: Supported
Number of serial ports: 3
Serial protocol: Modbus RTU slave station, SNP, serial I/O
Embedded communication: RS-232, RS-485
Ethernet ports: Two, supporting 10/100 mbps transmission rate
I/O memory: Designed to handle discrete I and Q up to 32Kbits, and analog AI and AQ up to 32K words
Block capacity: A maximum of 512 blocks, with a maximum block size of 128 KB
specification
Processor: Pentium III, 700 MHz microprocessor
Memory: 10 MB user memory (RAM) and 10 MB non-volatile or flash memory (NVRAM)
Operating frequency: 48-62 Hz
Communication interface: RS-232 program port interface, baud rate of 9600, programmable up to 19200 baud
Display: Large LCD display, can display 40 characters
specification
Rated current: 5 amp phase CT secondary coil
Protection accuracy: ±2%
Response time: ≤10 ms
Operating temperature range: -20°C to +55°C (-4°F to +131°F)
Size and weight
Dimensions: 100 mm x 70 mm x 30 mm
Weight: 0.5kg
Accuracy: Level 1.0
Linear range: 0 ~ 120%
Isolated voltage: 5000vdc/1 minute
Auxiliary power supply: +12vdc, ±12vdc, +24vdc
Operating temperature: -20℃ ~ +60℃
Temperature drift: <300ppm/℃
specification
Suitable for all kinds of electrical systems, electroplating, electrolysis industry AC high current measurement and control
Product input is saturable and Rogowski principle is adopted
Fast response time, up to us level
Product frequency response wide, up to 20khz or more
The product linearity is good, and the output linearity can reach 0.2%
The product precision is high, the overall accuracy is less than 1%
Small volume, light weight
