Usage: DS200SHVMG1A is a high pressure M-type interface board, mainly used in the Mark V series gas turbine control system. The board provides interface media from the SCR of the M-frame driver to the power supply board (DCFB or SDCI) and the power Supply connection card (PCCA).
Voltage range: For AC line voltages, which range from 240 to 1000V, the user needs to choose whether to use an attenuator according to the voltage range.
Control principle: Through multi-group CPU intelligent control, the UPS parameters can be controlled and fully controlled, providing enough computing power to ensure that the UPS is in working condition at any time.
Output frequency: A configurable shunt signal between -500 and 500mV is converted into a difference frequency output between 0 and 500kHz.
Accuracy: The exact accuracy parameter is not given directly in the search results.
Maximum memory: 64K bytes (but this information is not directly mentioned in the search results, and may overlap parts related to storage capacity or refer to different types of memory).
Operating temperature: 0°C to 60°C.
Storage temperature: -40°C to +85°C.
Number of IP addresses: one.
Specifications:
Processor type: Embedded 586.
Typical scan rate: 0.15 ms per 1K logic (Boolean contacts).
Series: Series 90-30 Programmable logic controllers (PLCS) from GE.
Processor type: Embedded 586 with 133 MHz processor speed.
User memory: Total capacity: 240KB.
Communication interface: Support SNP and SNPX protocols on the power supply RS-485 port, built-in Ethernet communication (10/100 base-T/TX Ethernet switch), with two automatic sensing 10/100baseT/TX ports.
Protocol support: including SRTP and Ethernet Global Data (EGD).
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).
Range and accuracy: Specific values are not clearly given
Size: DS2020FECNRX010Amm
Power amplifier board function: has set point S1 PQM SETUP\CLEAR DATA\CLEAR ENERGY VALUES for clearing data, when the value 4294967295(FFFFFFFF h) is reached, the displayed value will scroll to 0. In addition, negative watt-hours (kWh) and positive varhours(kvarh) since the last reset date are displayed.
