The GEVMIVME-7658 is a 6U VMEbus dual Pentium III single-board computer (SBC) built for industrial embedded computing, delivering up to 1.26 GHz processing, 2 GB ECC SDRAM, dual 10/100 Ethernet, Ultra320 SCSI, and ECP/EPP I/O for data acquisition, control, and communication in harsh industrial settings. The GEVMIVME-7658 supports VME64 (P1/P2) and PCI-X expansion, integrating 16550 serial, IDE/Ultra DMA/66, and parallel ports for legacy and modern device connectivity, with -40°C to +70°C operation and 133 MHz system bus for high bandwidth. It features ECC memory, dual Ethernet, and hot-swappable options to minimize downtime, while compatibility with VxWorks, Linux, QNX, and Windows CE enables real-time control in energy, defense, and manufacturing. The GEVMIVME-7658 also includes a watchdog timer, front-panel I/O (USB, SVGA, serial), and rear IDE/SATA for flexible deployment, making it ideal for mission-critical systems needing legacy VME integration and high reliability. It integrates seamlessly with GE DCS/PLC and third-party VMEbus modules, supporting 24 V DC (±10%) power and compliance with EN 61010-1, EN 55022, and IEC 61800-3 for global industrial use.
The GESR489-P1-HI-A20-E is a microprocessor-based generator management relay by GE Multilin, designed for small-to-medium generators, delivering protection, control, and diagnostics in power generation and industrial settings. It integrates overcurrent, overvoltage, undervoltage, under/overfrequency, and phase reversal protection, with a 1A phase CT input (P1) and 4-20mA analog outputs (A20) for seamless integration with SCADA systems. The GESR489-P1-HI-A20-E features an enhanced LCD display (E) for real-time parameter monitoring and RS232 communication for remote configuration via EnerVista software. Its dual-slope phase differential curve ensures accurate fault detection, while 10ms relay operation time and 50ms energy metering update rate enable rapid response to electrical anomalies. The GESR489-P1-HI-A20-E is panel-mounted with a draw-out design for hot-swappable maintenance, reducing downtime by 60% vs. fixed-mount alternatives. It is certified for IEC 60529 and UL 508, operating reliably in -25°C to +50°C environments with 36Vpk isolation voltage for enhanced safety.
The GEIS200TRLYH1BGF is a termination relay board for GE Mark VI Speedtronic turbine control systems, converting controller logic signals to relay outputs for valves, pumps, and safety interlocks in gas/steam turbine applications. The GEIS200TRLYH1BGF features 12 configurable Form-C relays (3A contact rating, 500VAC contact voltage) with jumper-selectable dry contacts or solenoid drivers for the first 6 channels, plus isolated outputs for ignition transformers. It supports 24VDC/125VDC/115-230VAC power with individual fuses and surge suppression, ensuring safe operation in -30°C to +70°C environments. The GEIS200TRLYH1BGF integrates D-shell connectors for plug-and-play Mark VI backplane integration and 48-terminal blocks for field wiring, with 1500V coil-to-contact isolation to prevent cross-circuit faults. Its 178×330mm form factor fits standard control cabinets, and hot-swappable design reduces maintenance downtime by 60% vs. non-modular alternatives. The GEIS200TRLYH1BGF is certified for IEC 61508 SIL 2, making it ideal for turbine safety shutdown systems and critical process control in power generation plants.
The GE531X303MCPBDG1 is a high-reliability AC power supply card tailored for GE legacy drive systems like DC-300, delivering stable power to motor field controls and logic circuits in industrial setups. It features precision voltage regulation for consistent output, with alignment marks for tool-free installation and surface-etched IDs for easy traceability. The GE531X303MCPBDG1 integrates overcurrent/overvoltage protection and thermal shutdown to handle harsh industrial conditions, with <50ms transient response for voltage sags/spikes. Its plug-and-play design ensures drop-in compatibility with DC-300 drive bays, and hot-swappable capability allows maintenance without system downtime. The GE531X303MCPBDG1 is a cost-effective upgrade for aging power cards, maintaining legacy system reliability while reducing replacement costs by 40% vs. full drive retrofits. It is TÜV-certified for IEC 61800-5-1 and UL-listed for industrial safety, with robust construction for -25°C to +70°C operation and 5g vibration resistance.
The GEIS200TTURH1CCC S1DF00Z is a turbine terminal board for GE Speedtronic Mark VIe control systems, designed for simplex/triple modular redundant (TMR) gas/steam turbine applications, enabling seamless integration with PTUR/VTUR modules for synchronization and protection. The GEIS200TTURH1CCC S1DF00Z features 2 barrier terminal blocks, D‑shell connectors, relays, and transformers, supporting 2/3 voting in TMR systems via jumper settings. It offers 24 VDC (±10%) power, 500 VAC isolation, and conformal coating for harsh industrial environments. The GEIS200TTURH1CCC S1DF00Z processes shaft voltage/current and breaker signals, ensuring compliance with API 670/612 standards for overspeed and synchronization protection. It integrates with Mark VIe I/O for real‑time monitoring, and its -20°C to +60°C operation and ESD protection make the GEIS200TTURH1CCC S1DF00Z ideal for power generation and oil & gas refining. The GEIS200TTURH1CCC S1DF00Z also includes on‑board diagnostics for open‑circuit/short‑circuit detection, minimizing unplanned downtime in critical processes.
The GEIS415UCVHH1A is a high-performance vibration monitoring module designed for GE Mark VIe turbine control systems, specializing in real-time vibration data acquisition, processing, and protection logic execution for gas/steam turbines and rotating machinery. The GEIS415UCVHH1A features 4-channel vibration input with 24-bit ADC resolution, enabling precise capture of shaft, bearing, and casing vibration signals to detect early mechanical anomalies. Its embedded digital signal processor (DSP) performs real-time FFT analysis and trend monitoring, triggering alarms or shutdowns per API 670 standards to prevent catastrophic failures. The GEIS415UCVHH1A integrates seamlessly with GE’s ControlST software, simplifying configuration, calibration, and diagnostic workflows. The GEIS415UCVHH1A operates reliably in -40°C to +70°C environments with IP20 protection and redundant 24VDC power inputs, ensuring continuous operation in harsh industrial settings. As a core component, the GEIS415UCVHH1A supports hot-swapping and auto-configuration, minimizing downtime during maintenance or module replacement. The GEIS415UCVHH1A’s compact DIN-rail design (176×120×50mm) optimizes panel space while maintaining compatibility with Mark VIe I/O racks for flexible system expansion.
The GEDS200UDSAG1ADE is a high-performance excitation board for GE’s Mark V turbine control systems, engineered to regulate generator output voltage and reactive power via precise excitation current control. The GEDS200UDSAG1ADE uses an 80196 microprocessor and EPROM modules for adaptive control, ensuring fast response to load changes. With a 24V DC operating voltage and robust PCB coating, the GEDS200UDSAG1ADE delivers reliable performance in harsh industrial settings. The GEDS200UDSAG1ADE integrates seamlessly with Mark V components, minimizing retrofitting needs while maximizing system uptime. It also includes overcurrent, overvoltage, and undervoltage protection, safeguarding generators during abnormal conditions. As a core part of Mark V systems, the GEDS200UDSAG1ADE ensures stable power generation across utility and industrial applications.
The GEV7668A-1310B0 350-9310007668-131020 D is a high-performance VME single-board computer (SBC) from GE’s V7768 series, equipped with an Intel Core 2 Duo processor (up to 2.16GHz), 2GB DDR2 SDRAM, and 8GB bootable CompactFlash, delivering robust computing power for industrial automation and real-time control tasks. The GEV7668A-1310B0 350-9310007668-131020 D features dual Gigabit Ethernet, 2 serial ports, 4 USB 2.0 ports, 2 SATA interfaces, and a PCI-X PMC expansion slot, ensuring seamless integration with diverse industrial I/O and communication networks. Its EasyRail PMC mounting system simplifies option board installation, reducing configuration time by eliminating the need to detach multi-slot carriers. The GEV7668A-1310B0 350-9310007668-131020 D supports hot-swapping and operates reliably in harsh industrial environments with a wide temperature range, making it a core component for mission-critical applications in power generation, oil & gas, and manufacturing. As a key part of GE’s industrial computing portfolio, the GEV7668A-1310B0 350-9310007668-131020 D integrates seamlessly with GE’s programming and monitoring tools, ensuring consistent performance and simplified maintenance.
The GEIC697CHS790 is a 9-slot rear mount rack for the GE Series 90-70 PLC systems, engineered to simplify CPU and I/O module configuration. The GEIC697CHS790 features a dedicated leftmost slot for AC or DC power supplies, and its rear-mount design fits 10-inch deep enclosures without extra fans. With dimensions 11.15” H x 19” W x 7.5” D, the GEIC697CHS790 has 1.6” standard slots and a 2.4” power supply slot, and it uses slot sensing to eliminate I/O module jumpers or switches. The GEIC697CHS790 also supports dual-rack operation via a Power Supply Extension Cable, letting two racks share one power supply. Compatible with all IC697 modules, the GEIC697CHS790 ensures reliable integration for industrial control systems.
The GEIC697MDL671 is a 24VDC discrete interrupt input module belonging to the GE Series 90-70 PLC system, which offers 16 input points divided into four isolated groups of four points each. Among these, the first 14 points (A1 – D2) serve as interrupt inputs, and the last two (D3 – D4) are configuration inputs, with all 14 interrupt points capable of running at the maximum I/O interrupt rate. The GEIC697MDL671 is designed with positive/negative logic compatibility, selectable input filters (1ms or 10ms), and LED indicators for each point’s on – off status, which enables it to be widely used in industrial automation scenarios that demand rapid response and precise control. As a key component of the Series 90-70, the GEIC697MDL671 integrates seamlessly with GE’s programming software and communication protocols, and its mechanical keying feature prevents incorrect installation, significantly enhancing on – site maintenance efficiency.
The GE IS200DTAIH1ABB is a Simplex Analog Input/Output Terminal Board under the GE Mark VI series, designed for industrial automation, especially for GE Speedtronic gas turbine control systems. This compact board, when installed in a plastic holder, enables DIN – rail mounting, which is convenient for integration into control cabinets. It has 10 analog inputs and 2 analog outputs, with one output configurable to 0 – 200mA via jumper reconfiguration. The GE IS200DTAIH1ABB is equipped with a 37 – pin JR1 connector and a 48 – screw TB1 terminal board, and typically uses #18 AWG shielded twisted – pair wires for connections. Its 21 jumper switches facilitate flexible configuration of current and voltage inputs/outputs, making the GE IS200DTAIH1ABB suitable for diverse industrial signal acquisition and control requirements. The GE IS200DTAIH1ABB also has a high – precision measurement capability of 0.1%, ensuring accurate data collection.
The GE BK698CPA15B0 is a specific model of a contactor from GE’s comprehensive line of industrial motor control and power switching components. This device is a robust, electromechanical contactor designed for making and breaking electrical power circuits, primarily for controlling three-phase AC motors, heating loads, or other high-power equipment. The GE BK698CPA15B0 functions as a remotely operated switch, activated by a control coil, to safely connect and disconnect the load from the power source. It is a key component in motor starter assemblies, providing the primary switching function often in conjunction with an overload relay for protection. The rugged construction of this contactor ensures reliable performance and long electrical life in demanding industrial environments.
