argument
Bus standard: VME64x.
Data transfer rate: up to 400 Mbps.
Number of channels: 32 digital input channels and 32 digital output channels.
Power Supply: +5 V DC.
Operating temperature: 0°C ~ +60°C.
specification
Size: 6U, single VME slot.
Weight: 0.8kg.
argument
Processor: AMD SC250 or AMD SC520 (different terms exist), built-in microprocessor, embedded 586 processor.
Processing speed: 133 MHz.
Typical scan rate: 0.15 ms per 1K logic.
User memory: 240 KB, configurable.
I/O points: 2048 fixed discrete input and output points.
Discrete global storage capacity: 1280 bits.
Register memory: can be configured from 128 to 32640 words.
System registers: 28 fixed system registers with timers and counters.
argument
Power input: Support 85 to 264 VAC (nominal voltage 120/240 VAC) and 100 to 150 VDC (nominal voltage 125 VDC) at 47 to 63 Hz.
Maximum output power: 100 watts, total power distributed in three output terminals.
Output voltage:
+5 VDC: 4.875 to 5.25 volts, 0-20 amps.
+12 VDC: 11.64 to 12.6 volts, 0-2 amps.
-12 VDC: -12.60 to -11.64 volts, 0-1 amps.
argument
As a system power module:
Stability: High quality electronic components and advanced circuit design ensure stable power output under various operating conditions.
Reliability: After strict quality control and testing, it can operate stably in a variety of harsh environments for a long time.
Efficiency: Use efficient power conversion technology to reduce energy consumption and improve the overall efficiency of the system.
Safety: With a variety of safety protection functions, such as over current protection, over voltage protection, overheating protection.
specification
Type: Central Processor (CPU) module
Brand: General Electric
Origin: USA
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Size and weight
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
argument
Number of channels: Four channels, each of which can perform AD conversion.
Resolution: 12 bits.
Acquisition signal voltage:
Voltage input: -10V~+10V, resolution is 5mV.
Current input: 4~20mA or -20~20mA, resolution is 20μA.
Communication interface: RS-485.
Communication rate: 9600bps.
Working voltage: 24VDC.
Operating temperature range: 0°C~55°C.
specification
Manufacturer: General Electric.
Model: IS200TVBAH2ACC.
Parameters and specifications
Manufacturer: General Electric (GE)
Series: Mark VI series
Type: PCB components for industrial control systems
Interface: Has a 37-pin (female) D-connector and a three-pin female plug
Components: Consists of more than 80 resistors, capacitors, diodes and a single integrated circuit
Control function: Up to twelve relays can be controlled and discrete output I/O packets are provided
Size and weight
Weight: Approximately 2.1 kg
Parameters and specifications
Multi-channel control: The F31X305NTBANG1 typically has multiple control channels that can simultaneously monitor and control multiple industrial process variables.
Communication interface: supports a variety of communication interfaces, such as Ethernet, serial port (RS-232, RS-485), Profibus, Modbus, etc., in order to exchange data and communicate with other devices and systems.
High Performance processor: A processor equipped with high performance for performing complex control algorithms and logic.
Storage capacity: Sufficient storage capacity to store applications, configuration data, historical data records, and alarm information.
Real-time operating system: Run a real-time operating system to ensure timely execution of control tasks.
Parameters and specifications
Type: Ethernet module, commonly used for communication in industrial automation and control systems.
Transmission rate:
10/100 Mbps transmission rate is supported.
Some information indicates that IC695ETM001-EH may support higher transfer rates (such as 1000 Mbit/s), but this does not match the description of the standard IC695ETM001 and may be a parameter of a different model or an upgraded version.
Ports: Has two (2) RJ45 Ethernet ports.
Protocol support:
Supports the Layer 4 TCP/IP protocol stack.
The SRTP (Service Request Transport Protocol), Modbus TCP, and EGD (Ethernet Global Data) protocols can be executed.
Processor speed: Ethernet processor speed is 200 MHz.
RS-232 Serial port: Supports data transfer rates from 1200 bps to 115200 bps.
Parameters and specifications
Processor speed: 1.1 GHz Atom processor.
Boolean logic execution speed: 0.72 ms/k.
Memory: 10 MB of non-volatile flash memory for storing data and programs.
Communication interface:
Embedded Ethernet interface, support SRTP protocol, data transfer rate of 10/100 Mbaud.
Two serial ports (RS-232 and RS-485).
I/O capability:
Discrete input and output signal capacities up to 32K bits.
Analog input and output capacity up to 32K words.
Supported protocols: Modbus RTU Slave, SNP, Serial I/O, Modbus TCP server and client, PROFINET, EGD, Profibus DP, etc.
Size and weight
Dimensions: 170mm x 105mm x 32mm.
Weight: About 120g.
Parameters and specifications
Transmission rate: Support 153.5Kbaud standard/extended, 76.8Kbaud or 38.4Kbaud, transmission rate can be configured through software.
Bus terminal resistance: The bus terminal resistance required at both ends of the bus cable is 75, 100, 120, or 150 ohms.
Isolation rating: The isolation rating of the GE controller is 2000 volts and the transient common mode rejection isolation rating is 1500 volts.
Rated current: 300 MA.
Rated voltage: 5 V DC.
Size and weight
Size: Depending on the search results, the exact size may vary by supplier or packaging. For example, some suppliers provide a package size of 135413145mm, but this may be the size of the package box rather than the size of the module itself. The module itself is usually small in size and suitable for installation into a PLC system.
Parameters and specifications
Communication interface: RS-485
Communication rate: 9600bps
Voltage: 24V
Operating temperature range: 0°C~55°C
Size and weight
Size: 120mm×80mm×40mm
Weight: About 0.5kg
series
The IC695NIU001 module is part of the AB 1769 series under the ALLEN-BRADLEY brand from Rockwell Automation. The series is a series of compact programmable automation controllers and modules designed for small and medium-sized industrial automation control systems.