Model: 3HAC026253-001
Type: Compact Controller / Robot Power Supply
Brand: ABB
Operating Voltage: 24Vdc/120Vac
Operating Frequency: 50/60Hz
Serves as a compact controller for robotic systems, providing power and control functionalities.
Weight: Approximately 0.6kg
Dimensions: Package size is 101025 (specific dimensions of the device may vary)
The DSQC643 serves as a safety board for ABB robots, particularly for the IRC 5 controller .
Net Weight: 0.34kg
Gross Weight: 0.7kg (including packaging, if applicable)
Product Size: 340x280x80mm
The BRC410, also commonly referred to as SPBRC410, is a high-performance controller card in the ABB Bailey DCS system
It integrates advanced control algorithms and communication interfaces for data acquisition, processing, and control functions in complex industrial automation tasks
It serves as a crucial component in the ABB Bailey DCS system, enabling efficient industrial automation and control
Specific weight and dimensions for the BRC410 are not provided here, but as an industrial controller card, it is typically designed to be compact and lightweight for easy installation in industrial environments.
Model: CI853K01 3BSE018103R1
Voltage: 24V
Current: 100-400A
Data communication rates supported: 9.6kBit/s, 19.2kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s
Supports standard communication rates and can be manually set via dip switches
Equipped with 6 bi-color LED status indicators and power failure relay output alarm
Provides 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection
Designed with EMC testing certification
Features DC9-36V wide redundant dual power supply, DC1500V power isolation, and reverse connection protection
IP30 protection rating, with a wave-patterned aluminum reinforced chassis and standard industrial 35mm rail mounting method
Model: 3HAC037084-001
Brand: ABB
Material: Stainless steel raw materials and cast aluminum industrial explosion-proof shell, which has strong corrosion resistance, long-term stability, and anti-interference ability.
Accuracy: Ranges from 0.1% fs to 1.0% fs.
Power Supply Voltage: For sensors, it is +5~12vdc; for transmitters, it is +24vdc, +12vdc, +5vdc.
Output Signal: For sensors, it is 1mv/v; for transmitters, it is 0/0.5/1.0~4.0/4.5/5.0/10.0v (three wire system), 4~20ma (two/three wire system).
Load Capacity: Current type ≤ 500r; voltage type ≥ 100kr.
Temperature Compensation: -10℃~70℃.
Working Environment: -20℃~75℃, ≤85%rh.
Storage Environment: -40℃~85℃, ≤95%rh.
Product Net Depth: 127.5 mm
Product Net Height: 185 mm
Communication Protocols: Supports standard communication rates as well as manual setting of all standard rates or rate adaptation using dip switches.
Protection: Features 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection.
Redundancy: Equipped with DC9-36V wide redundancy dual power supply, DC1500V power isolation, and reverse connection protection.
Installation: IP30 protection rating, wave-pattern aluminum reinforced casing, and adopts standard industrial 35mm rail mounting method.
Indicators and Relays: Equipped with 6 bicolor LED status indicators and power fault relay output alarms.
Hot Swappable: CI853 supports hot swapping.
The EI813F is an Ethernet module designed for use with the AC800F field controller.
It complies with the IEEE802.3 Ethernet standard and offers communication in line with the 10BaseT standard at a transmission rate of 10 MBit/s.
It features a 32-bit data bus and direct memory access to the main memory, with CPU overhead during runtime being less than 4%.
An optional battery is available to provide redundant battery backup for the main memory1.
Specific weight and dimension details for the EI813F are not provided in the sources consulted. However, as an industrial Ethernet module, it is likely to be compact and designed for installation within industrial control systems.
The exact weight and dimensions may vary slightly depending on the source. One mention suggests a weight of 15 kg.
Dimensions are not specifically listed, but it is typically compact and designed for installation within industrial robots.
It is made with a robust, one-piece aluminum alloy shell, which acts as a protective layer for the electronic circuits.
It is densely designed to provide various environmental protections and can be installed in hazardous locations as defined by the ISA standard S71.04.
It features 0~20mA channel isolated input interfaces, with eight 20mA DC analog input channels, each fully isolated from other channels and ground.
DSAI130 deploys intelligent algorithms across a distributed network to efficiently manage and optimize complex systems.
It features powerful data processing and adaptive learning capabilities, enabling rapid decision-making in dynamic environments.
Distributed Architecture: Tasks are distributed across multiple nodes, enhancing system processing power, reliability, scalability, and adaptability.
Advanced Algorithms: Integrates deep learning, machine learning, and fuzzy logic for data processing and analysis.
Real-time Processing: Capable of collecting, analyzing, and processing large amounts of data in real-time.
Adaptive Learning: Continuously adjusts behavior based on environmental changes and system feedback.
Industrial Control Interface: The ABB PP846 is a touchscreen module designed for industrial control systems, providing an intuitive human-machine interface (HMI) for monitoring and controlling automation systems.
Real-Time Data Display: Capable of displaying real-time data, including sensor readings, process variables, and production status.
Alarm and Notification: Features alarm and notification functions to alert operators of issues and ensure stable industrial processes.
Approximately 4.6kg.
User-Friendly: Equipped with an intuitive user interface for easy parameter settings and data queries.
High Reliability: Constructed with high-quality materials and advanced manufacturing techniques to ensure stable operation in harsh industrial environments.
Multiple Communication Interfaces: Supports various communication interfaces such as Ethernet, serial ports, and USB for data transmission and sharing with PLCs, DCS, SCADA systems, and other control devices.
Flexibility: Supports various configuration options, including different input/output voltages and signal types.
Specific weight and dimensions for the SDCS-POW-4-SD are not provided here. For accurate measurements, please refer to ABB’s official documentation or contact their technical support.
Wide Power Voltage Range: Supports a voltage range of 24-240VAC/VDC, providing flexibility in different industrial settings.
Enhanced Measurement Capabilities: Offers doubled measurement input types compared to previous models, with the ability to measure AC+DC voltage or AC+DC current.
Protection Functions: Incorporates short-circuit, overload, and thermal protection features to safeguard the system in case of abnormal conditions.
Multiple Output Modes: Provides various output modes to meet different application requirements.
The primary function of the SDCS-CON-4 is to control industrial processes and machinery through programming.
Specific weight and dimensions for the SDCS-CON-4 are not provided here. For accurate measurements, please refer to ABB’s official documentation or contact their technical support.
High Processing Speed: The SDCS-CON-4 is capable of handling large amounts of data with high speed.
Multiple Communication Interfaces: It supports various communication interfaces, including Ethernet and serial communication.
Modularity: The modular design allows for easy installation, maintenance, and flexible configuration.