Parameters and specifications
Operating voltage: 24V DC, it is also said that the input voltage range is 12-48VDC, and the output voltage range is 5VDC, but this statement may be related to the specific application scenario.
Power: 5W.
Temperature range: -40 ° C to 85 ° C, indicating that the module can work normally in a wide temperature range.
Protection rating: IP65, indicating that the module has a high degree of dust and water resistance.
Current: It is said that the current is 100-400A, but considering that this is a voltage measurement module, this current range may be related to the power supply or load of the module, rather than the current parameters of the module itself.
Size and weight
Size: Some say it is 10cm x 10cm x 10cm, another say is 170mm x 105mm x 32mm, and the weight is about 120g. However, there are also claims that the weight is 0.5kg or 2KG.
Parameters and specifications
Model: REF615C-D
Brand: ABB (sometimes referred to as GE, but according to most information, this is an ABB product)
Applications: Usually used in power systems, including power substations, power distribution, power quality monitoring, motor protection and equipment protection.
Functions: With current and voltage monitoring, overcurrent and overvoltage protection, fault detection, automatic reclosing and communication interface functions.
Communication protocols: Support IEC 61850, Modbus and other communication protocols, easy to communicate with other devices and monitoring systems.
Parameters and specifications
Bus consumption current: 80mA
Total power consumption: 3W
Number of input points: 10
Rated voltage: 24V DC
Continuous allowable voltage: 30V DC
Surge voltage: 35V DC, 0.5s
Logic “0” voltage range: 5V DC, 1mA
Logic “1” voltage range: 15V DC, 1mA
Input delay: 4.5ms
Signal input type: PNP/NPN photoelectric isolation
Cable length (shielded) : 500M
Cable length (unshielded) : 300M
Number of output points: 6
Output voltage: 24V DC or 250V AC
Rated current: 2.0A
Rated current of common end: 10A
PPC905AE101 Current: 5A, 4s@10% duty cycle
Parameters and specifications
Power supply voltage: 24V DC
Rated current: 5A
Maximum current: 10A
Output power: There are 120W and 360W two versions, may vary depending on the configuration or model
Response frequency: 500Hz
Accuracy: ±0.05%FS
Operating temperature range: -25~70℃
Maximum output current: Maximum 5mA per channel
Size and weight
Size: Different sources give different size information. Some say it is 8.0 inches x 2.0 inches x 13.0 inches (20.3 cm x 5.1 cm x 33.0 cm), while others say it is 96mm x 48mm x 16mm.
Parameters and specifications
Model: SDSS-CON-4
Brand: ABB
Product Type: Programmable Logic Controller (PLC)
Switch quantity: up to 40 in 40 out, analog quantity up to 8 in 4 out
Working voltage: 24VDC
Voltage range: The voltage is 24V and the current range may be from 100A to 400A
Rated frequency: 60HZ
Operating temperature: -20°C to 60°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95% non-condensing
Size and weight
Size: There is a variety of size information, such as 210mm x 95mm x 25mm, 2859036mm, and 100*100mm.
Parameters and specifications
Function: REM610 provides a variety of protection functions, such as three-phase thermal overload protection, three-phase overcurrent protection, three-phase short-circuit protection, non-directional ground fault protection, three-phase unbalance protection, reverse phase protection, etc.
Communication capability: Support to connect to the control and monitoring system through the serial communication bus to achieve remote control. Local control is possible from a computer connected to a front-end communication port.
Human interface: Includes a liquid crystal display (LCD) and navigation buttons to make local use of the relay safe and easy.
Power supply: The supply voltage is usually 100-240 V AC.
Parameters and specifications
Model: CI532V05 3BSE007297R1
Brand: ABB
Product type: controller or interface card module
Functions: Control and monitor various equipment and systems in industrial processes to achieve automated control and data acquisition
dimension
Product net depth/length: 140 mm
Product height: 30 mm
Net width: 360 mm
Parameters and specifications
REM615 HBMCAEAGANB6ANN1XG is a powerful motor protection measurement and control device, mainly used in manufacturing and processing industry asynchronous motor protection, control, measurement and monitoring.
Standard configuration: The unit comes in four standard configurations that cover all basic motor protection functions, voltage protection functions, and power and energy measurements.
Communication standards: Multiple communication standards are supported, including the substation IEC61850 communication standard, Parallel Redundancy Protocol (PRP), and High Availability Seamless Redundancy Protocol (HSR). It also supports DNP3, IEC 60870-5-103 and ModbusR protocols, and Profitbus DPV1 protocols by using the SPA-ZC 302 protocol adapter device.
argument
Because 3ASC25H203 is an ABB product, its specific parameters may vary depending on application scenarios and versions. However, based on the search results, we can know that it is a high-performance controller or communication module, which may have high-speed data processing capabilities, accurate control algorithms, multi-channel input and output functions.
specification
Type: High performance controller/communication module
Application scenario: Industrial automation, PLC system
Interface: Multiple communication protocols may be supported, such as Modbus, Profibus, and CANopen
Size and weight
Weight: One saying is 3kg
argument
Voltage: 24V (may vary depending on specific application scenarios)
Current: 100-400A (but this parameter may not be applicable to fiber optic splitters, may come from other similar models of product confusion)
Memory expansion capacity: 128MB (again, this parameter may not apply to fiber dispensers and may be confused with other products)
specification
Type: Optical fiber distributor
Usage: Widely used in optical fiber communication system, to distribute optical fiber signals
Port design: Multi-port design with multiple input and output ports
Weight:
2KG
0.56 KG
