Arc Detection: The TVOC-2-240 is capable of detecting arc faults in power systems, which are potential safety hazards.
Fast Response: The monitor responds quickly to arc faults by sending electrical signals to nearby circuit breakers to disconnect the power and extinguish the arc within 1 millisecond.
Multiple Detector Inputs: It has 10 detector inputs and can trigger up to three circuit breakers with regional selectivity.
Expandable Design: Up to two expansion units can be added, increasing the number of light detectors to 30.
Power Supply: The device operates on a power supply range of 100-250 V DC or 100-240 V AC 50/60 Hz.
Dimensions and Weight:
Dimensions: The product’s net width is 210 mm, net height is 230 mm, and net depth/length is 80 mm.
Weight: The TVOC-2-240 weighs approximately 1.2 kilograms.
Tensile Force Rating: 2.0KN (2000 Newtons) indicates its maximum capacity for measuring tensile forces.
Model Identification: PFTL101B is the model number, while 3BSE004185R1 is the specific part number for this tension sensor.
Dimensions and Weight:
Dimensions: Exact dimensions may vary slightly based on packaging or attachments, but typically, the sensor itself is compact and suitable for integration into various systems.
Weight: The weight is typically light enough for easy handling and installation but specific numbers may not be widely available.
The CI522 is a contactless reader chip that operates at 13.56MHz
It supports the ISO/IEC 14443 A/MIFARE standard and is suitable for a variety of scenarios such as smart door locks, NFC applications and electric vehicles
Weight :
CI522 As a chip product, its weight is usually very light. However, the exact weight may vary depending on the package form and product model.
For example, in some contexts, the weight may be mentioned as 0.59kg5 or 2kg6, but these may refer to the weight of the entire module or device, including the CI522 chip, rather than the chip itself.
function :
The CI522 is used to achieve contactless data reading and writing functions, especially for applications where near field communications1 is required.
It can communicate wirelessly with electronic tags and is widely used in smart door locks, NFC payment, access control systems and other fields
Specifications: Gaming mouse, support wired +2.4G dual-mode connection 1.
Weight: about 96 g 1.
Function: For gaming esports, support macro programming, suitable for desktop and notebook use 1.
Parameters: photoelectric resolution up to 5600dpi, number of keys 7, wireless transmission frequency 2.4GHz1.
Dimensions: Approx. 120.34mm x 69.2mm x 42.59mm1.
A type of power supply or converter :
Specifications: Specific specifications may vary from product to product, but usually include parameters such as voltage and current.
Weight: For example, the weight of a power supply is 2kg3, but note that this is only an example, the specific weight must be determined according to the actual product.
Function: Convert or provide electrical energy, depending on its application scenario23.
Parameters: Output voltage 24VDC, power 240VDC, current 3.6A, etc. 2, but the specific parameters are subject to the product manual.
Size: If not specified, the size information should refer to the specific product specification sheet.
Model: PM511V08, part number: 3BSE011180R11.
Mainly used in industrial automation systems for process control and monitor1.
It is an analog communication module, which is often used for analog signal exchange and communication with sensors, actuators and other equipment.
Weight :
Different sources give different weight information. One source says it weighs 2KG3, while another says it weighs 0.2kg4. The exact weight may vary from batch to batch or configuration.
function :
It is mainly used for the acquisition and communication of analog signals to realize the automation and intelligence of industrial production process2.
Supports a variety of communication interfaces, such as serial ports, Ethernet, etc., and can exchange data with other devices and systems2.
High precision, stability and reliability for harsh environments2.
Specifications: The specifications of the 3BSE018161R1 would typically include its operational parameters, such as voltage and current ratings, frequency response, power handling capability, and environmental conditions under which it can operate reliably. These specifications ensure that the component meets certain performance standards and is suitable for its intended application.
Weight: Without precise details, the weight of the 3BSE018161R1 cannot be accurately stated. However, if it’s an electronic component, its weight would likely be relatively light, ranging from a few grams to possibly tens of grams, depending on its size and construction materials.
Function/Purpose: The primary function of the 3BSE018161R1 would be determined by its design and application. It could serve as a sensor, controller, transducer, or some other specialized electronic component, performing tasks such as signal conversion, data processing, or system control within a larger electronic system or device.
PP846A1 is designed to meet specific performance criteria, tailored for its intended application.
It incorporates advanced materials and manufacturing processes to ensure reliability and durability.
Weight:
The weight of the PP846A1 can vary depending on the exact composition and design. Without specific details, a typical range might be between 50 to 200 grams, but this can significantly differ based on actual construction and materials used.
Function/Purpose:
PP846A1 serves a defined purpose within its application, which could range from being a structural component, an electronic part, or a specialized tool. Its function is to enhance or enable specific operations within a system or device.
Used for various industrial applications such as signal control, valve control, pump control, and alarm systems.
Parameters:
Input Voltage: 100-240V AC.
Output Voltage: 24V DC.
Maximum Output Current: 2A.
Operating Temperature Range: -40°C to 85°C.
Dimensions: 110mm x 80mm x 30mm.
High-Performance Processor: This module incorporates a high-speed processor chip capable of handling large volumes of data and complex control logic, ensuring real-time system performance and stability.
Large Memory Capacity: Equipped with a substantial memory capacity, it can store extensive program codes and data, meeting the demands of complex control scenarios.
Communication Interfaces: Supports various communication protocols and interfaces, such as Ethernet/IP and Modbus TCP/IP, facilitating seamless data transmission and communication with other devices and systems.
Dimensions and Weight:
Exact dimensions and weight may vary depending on the specific configuration and manufacturing standards. It is recommended to refer to official ABB documentation for precise measurements.
Model Number: KUC755AE106.
Ordering Code: 3BHB005243R0106.
Power Supply: The module is designed to accept appropriate power input to meet its operational requirements. This may include a range of voltages and frequencies, ensuring stable operation in diverse environments.
Output Power: KUC755AE106 is typically designed to provide a range of output powers, adapting to different application needs. Whether it’s high-power or low-power applications, the module can deliver stable and efficient output.
Communication Interface: The module supports communication interfaces for integration and control with other automation devices or systems, facilitating data sharing and exchange.
Dimensions and Weight:
Dimensions: The module measures approximately 243mm x 523mm.
Weight: The weight of the module is approximately 5.6kg.
Model Number: AO810 3BSE008522R1.
Output Type: Analog output module capable of converting digital signals to analog signals.
Output Ranges: Supports multiple output ranges, configurable based on specific application needs.
Communication Interfaces: Compatible with various communication protocols and interfaces, such as Modbus and Profinet, for seamless integration with other systems.
Dimensions and Weight:
Exact dimensions and weight of the ABB AO810 3BSE008522R1 module are not provided in the given references. These specifications may vary depending on the manufacturing batch and any updates made by ABB. For precise measurements, please consult the official ABB documentation or contact ABB’s technical support.
