Input voltage: 24VDC, 48VDC
Output voltage: 24VDC
Data interface: 9-pin Sub_D jack connector, supporting Profibus DP bus standard. The communication rate includes 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s and other rates
Lightning protection: With 4000V lightning protection and 1.5A overcurrent protection and 600W surge protection
Power supply and protection: dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function2.
Storage capacity: 16MB RAM
Function Description: ABB 07AC91 is an analog expansion module, with high precision and high stability, support a variety of common interface protocols, and has good anti-interference ability. The module can test three voltage levels (collector/drain voltage ≤2v, 10v, 40v±5), three current levels (collector/drain current ≤2ma, 20ma, 200ma±5) and three power levels (power ≤0.04w, 0.4w, 0.4W). 4w±10%).
Accuracy: In terms of test values, there are a variety of accuracy indicators, such as degree (static accuracy) vc/d ±(2% o.v.+3 bit), ic/d ±(2% o.v.+3 bit) and so on
Input channels: 16
Input frequency: 100kHz per channel
Count range: 0 to 65535
Counting accuracy: ±1 count
Input signal voltage: 24V DC
Power consumption: 4W
Input voltage: 380-500 VAC, three-phase, 50/60 Hz
Output voltage: 0-500 VDC
Rated current: 10 A
Peak current: 20 A
Control mode: Support speed control, torque control, position control
Communication interface: Support Modbus, Profibus, DeviceNet, CANopen and other communication protocols
Protection features: including over current protection, short circuit protection, over voltage protection, under voltage protection, over temperature protection
Technical parameters:
Input signal: thermocouple, thermal resistance, resistance, voltage, current and other types
PID control output: voltage, current, relay contact switch, SSR driver, etc
Communication transmission output: 4~20mA, 1~5V, Rs485 communication, etc
Accuracy: ±0.2%F.S±1 word, automatically compensate for temperature drift and time drift
Current output load capacity: 0~600Ω or 0~250Ω
Measurement control cycle: 0.5s
Distribution output: DC24±1V(25mA)
Brand: ABB
Model: CI858K01
Product Number: 3BSE018135R1
Input voltage: 24VDC
Current: 100 mA
Communication protocol: PROFIBUS DP
Operating temperature: -40°C to +85°C
Storage temperature: -40°C to +85°C
Control principle: Embedded core module based on ATMEL AT91SAM9263 processor
Number of channels: 1
Communication speed: 40000 kbit/s
Working voltage: DC24V (18-36V)
Power: 7.5W
Output frequency: 30Hz
Number of tension units: 2
Excitation signal current: 0.5Ams, 330Hz
Power consumption: +5V@250mA, +3.3V@10mA
specification
Structure: Modular
Installation: Installation in the control room
LD instruction processor: hard PLC
Function module: including two load cell input, voltage and current output A+B, with adjustable filtering function
Display: A, B, A+B, A-B can be displayed on the display
Control principle: The controller can accurately control the excitation current to ensure the normal operation of the motor or other equipment, with high-precision current detection and control algorithms.
Communication options: Include Ethernet, cellular, and industrial protocols such as MODBUS, DF1 Slave, J1939, CAN Open, and more. In addition, it can “teach” communication over almost any ASCII protocol.
Internal memory: The stored application logic is 512K, fonts are 128K, and images are 256K.
Size and weight:
Size: There are two different size descriptions. One is 220 x 160 x 80mm and the other is 120mm x 80mm x 40mm. This may reflect size differences between models or versions.
Model : PFTL101B 2.0KN
flash : 6 MB
Input voltage : -0.6 V DC
Operating temperature range : -20°C to +50°C
Storage temperature range : -40°C to +70°C
Diagnostic bus : 2 Mbps HDLC
Weight and dimensions
Weight : about 120g
Dimensions : 170mm x 105mm x 32mm
