Showing 5605–5616 of 7251 results
¥ 6,035.00
Parameters and Specifications :
ABB’s KUC711AE is a control module specifically designed for excitation systems1 .
It provides direct current to the excitation windings of synchronous motors to regulate the terminal voltage of generators2 .
It is designed for current ranges from 20 to 12,000 A1 .
Dimensions and Weight :
Two different size descriptions are mentioned: 220 x 160 x 80 mm and 120mm x 80mm x 40mm. This likely reflects differences in models or versions3 4 .
Weight: 5 kg3 4 .
¥ 4,965.00
Parameters and specifications:
I/O configuration: Hardware I/O configuration point 256, depending on the user’s choice (software can set the address input 256, output 256).
Programming capacity: 8000 steps built in, expandable to 16,000 steps using an additional storage box.
Number of instructions: basic sequence instructions 27, step ladder instructions 2, application instructions 128, a total of 298 application instructions available.
Operation processing time: basic instruction 0.8μs/ instruction, application instruction 1.52 to several hundred μs/ instruction.
Programming language: logic ladder diagram and instruction list.
¥ 4,308.00
Parameters :
Input Voltage Range : 12-48VDC
Output Voltage Range : Depends on the converter/inverter
Output Power : 16kW
Frequency Range : 0-400Hz
Memory Capacity : 16 MB1
Specifications :
CPU : 32-bit RISC processor
Operating Temperature Range : -20°C to +50°C
Storage Temperature Range : -40°C to +70°C
Humidity : 5% to 95% RH (non-condensing)
Dimensions : 170mm x 105mm x 32mm
Weight : Approximately 120g1
¥ 5,624.00
Parameters and Specifications:
Maximum Rated Current: 3500 A
Maximum Rated Voltage: 4500 V
Maximum Rated Switching Loss: 14000 W
Maximum Rated Switching Frequency: 1600 Hz
Maximum Rated Junction Temperature: 175°C
Minimum Rated Gate Pulse Current: 10 mA
Minimum Rated Gate Pulse Voltage: 15 V
Number of Dies: 1
Cooling Method: Water Cooling
¥ 6,241.00
Parameters and Specifications :
Input Voltage : 24V DC1 2
Output Voltage : Variable depending on the application1
Output Power : 16kW1 2
Frequency Range : 0-400Hz1 2
Dimensions and Weight :
Size and Weight : Not explicitly stated1 2
¥ 6,023.00
Parameters and Specifications :
Input Voltage : 24 V DC
Output Voltage : 24 V DC
Maximum Current : 10 A1
Power Range : 120 W2
Tension Measurement Range : 0-10 kN2
Tension Accuracy : ±0.1%2
Control Modes : Tension Control, Speed Control, Position Control2
Operating Temperature : -25°C to +70°C1
Dimensions and Weight :
Size : 225 mm x 160 mm x 80 mm2
Weight : 2.0 kg2
¥ 6,025.00
Parameters and Specifications :
Power Supply : AC 100V~240V, 47~63Hz1
External Trigger Voltage Range : ±15V1
External Trigger Sensitivity : DC ~ 30MHz:~50mV, 30MHz ~ 150MHz:~100mV, 150MHz ~ 250MHz:~150mV1
External Trigger Input Impedance : 1MΩ±2%, ~ 18pF1
External Trigger Input Range : 300V (DC+AC peak), CATII1
Dimensions and Weight :
Size : 310W x 142H x 245D (mm)2
Weight : Approximately 4.1kg1
¥ 3,652.00
Parameters and Specifications :
Type : Touchscreen Operator Panel
Model : PP845
Display Size : 8 inch
Display Resolution : 800 x 600 pixels
Display Colors : 16.7 million colors
Touchscreen Type : Resistive
Interfaces : Ethernet, RS-232/RS-485
Protocols : Modbus TCP, Modbus RTU, PROFIBUS DP
Power Supply Voltage : 24 VDC
Power Consumption : < 20 W
Operating Temperature : 0-55°C
Storage Temperature : -20-60°C
Humidity : 5-95% non-condensing
Enclosure Protection Rating : IP651
¥ 5,625.00
Parameters :
Working Voltage : 24V1
Rated Current : 5A1
System Memory : 8MB1
Operating Temperature : Up to 60°C2
Input Voltage : 24V1
Output Frequency : 50HZ1
Specifications :
Module Type : Pulse counter board3 4
Channels : Not specified (but typically 4 channels based on similar models)4
Interface : HDMI1
Internal Functions : Archiving, Communication, Alarm1
¥ 3,650.00
Parameters :
Rated Voltage : 3300V AC1
Rated Current : 1000A2
Peak Forward Current : 1600A1
On-State Voltage Drop : 2.5V1
Gate Trigger Current : 0.5A1
Operating Temperature : -40°C to +85°C1
Storage Temperature : -40°C to +125°C1
¥ 3,650.00
Parameters :
Input Voltage : 24V DC
Output Voltage : Variable Frequency Drive Output Voltage
Output Power : 16kW
Frequency Range : 0-400Hz
Specifications :
Brand : ABB
Model : PM511V16
Operating Temperature : -40°C to 85°C1
Material : Engineering Plastic1
Application Fields : Industrial Automation, Power Industry, Manufacturing, Chemical Industry2
¥ 4,650.00
Parameters :
Processor Performance : High-performance processor for quick and accurate processing of various control algorithms and data1 2 .
Operating Temperature : -10 to 70°C (optional -40 to +85°C)3 .
Relative Humidity : ≤90% (non-condensing)3 .
Storage Temperature : -40 to 80°C3 .
Specifications :
Brand : ABB
Model : PM864A
Modular Design : Allows for customization and expansion based on user needs1 2 .
Interfaces : Supports multiple interfaces such as Ethernet, serial ports, and CAN bus1 2 .