Processor: Intel Atom D510 Dual Core 1.66GHz
Memory: 4GB DDR3 RAM
Storage: 16GB SSD
Ethernet Ports: 2 x 10/100/1000 Base-T
USB Ports: 2 x USB 2.0
Serial Ports: 2 x RS-232/422/485
Expansion Slots: 1 x CompactFlash
Display: 10.4″ TFT LCD with 800×600 resolution
Operating System: Windows Embedded Standard 7
Input types: Universal, including thermocouple, RTD, mA, mV, V, and pulse
Output types: Relay, SSR, mA, and V
Control modes: On/off, proportional, integral, derivative, and PID
Advanced control functions: Cascade control, ratio control, and feedforward control
Display: Large, easy-to-read LCD display
Interface: Simple, user-friendly interface
The ABB UFC78AE01 HIEE300936R0101 has the following key parameters:
Input Voltage: 24 VDC
Output Voltage: 24 VDC
Operating Temperature Range: -40°C to +70°C
Dimensions: 45 x 105 x 115 mm
Weight: 0.4 kg
Voltage: Different sources give different voltage ranges, such as 24V DC, 12-48VDC, and 180V. This may be due to differences in different models or application scenarios.
Current: For current, there are references to 100-400A, and there are also references to a maximum of 10A. This may also vary by model.
Efficiency: In certain cases, the efficiency is greater than 90%.
CPU: Some information indicates the use of a 32-bit RISC processor.
Brand: ABB
Type: Controller module
Support customization: No
High performance processor: The module is usually equipped with a high performance processor to achieve fast response and efficient control.
Multi-purpose control: Designed for a variety of control applications, it can be programmed and configured to meet different control needs.
Communication interface: Equipped with communication interfaces, such as Ethernet and other standard interfaces, to facilitate data exchange and integration with other devices.
Generator protection: In power system applications, this module usually includes a protection function for the generator to ensure that appropriate measures are automatically taken to protect the safe operation of the generator under adverse conditions.
Measuring range: 1.0 kilonewtons (kN).
Accuracy: With high measurement accuracy, it can provide accurate force or pressure measurement results.
Output signal: Usually use analog signal output, such as 4-20mA signal or 0-10V signal, and digital signal output, such as RS485 communication interface.
specification
Structure: Small, compact sensors for easy installation and integration into devices.
Material: High quality material is used to ensure the reliability and stability of the sensor.
Protection level: There is usually a certain level of protection to protect the sensor from the external environment.
Operating voltage: AC110V±10%, the limit operating voltage is AC99V (low voltage) and AC121V (high voltage).
Voltage protection: It can absorb reverse electromotive force higher than DC160V, and the high voltage protection point is AC145V.
Input pulse frequency: maximum 130KHz.
specification
Matching motor: brushless motor (no Hall sensor required), speed range 0~30000RPM, power range from 1000W without fan to 2000W with fan.
Parallel drive: A maximum of 255 drives can be connected in parallel.
Communication interface: Support Modbus, with RS-232, RS-485 and other communication interfaces.
Input voltage: Usually 24VDC.
Output voltage: This may be -0.6V DC in some configurations, but please note that this may not be its standard output feature, depending on the application scenario.
NVRAM: 8 KB.
Voltage range: 220VDC May be supported in some cases, but this may not be its primary operating voltage range.
Current: The 100-400A current range is mentioned in some descriptions, but this may not be a direct parameter for the PM864A, but is confused with relevant parameters for other ABB products.
Output frequency: 50HZ, but again this may not be a direct parameter of the PM864A, but rather a parameter related to ABB power electronics controllers or similar devices.
Size: According to the latest search results, it measures 130mm x 130mm x 80mm (5.12 inches x 5.12 inches x 3.15 inches).
Weight: About 5.0 kg (11.0 lb), but there is also information that it weighs 2KG.
High torque density: for demanding applications.
Fast response time: Suitable for applications requiring fast motion control.
High accuracy: Ensures precise motion control.
Multiple optional functions: Meet various application requirements.
Power supply voltage:
24V DC
220V AC
Current:
100-400A (one way of saying)
12A (disconnected capacity, another way to say it)
Speed Response frequency: 1MS
Memory expansion capacity: 128MB
Motor power range: 0.12~ 200kW
Torque range: 85~18000 nm
Ratio range: 5~28000
Input speed range: 750 to 3000 rpm
Output speed range: 0.05~500 rpm
Rated voltage: 380 V
Rated frequency: 50 Hz
Rated current range: 1.5~350 A
Efficiency: Up to 97%
Noise level: less than 80 dB
Size and weight
Overall dimensions: 132mm×105mm×52mm
Weight: 0.82 kg
Processor type: High-performance processors, which may include the Atom™ E 3800 series
Memory: Up to 4GB ECC RAM and up to 32GB EMM are supported
Communication protocol: compatible with picmg express r 2.1 and Type 10
Communication rate: from 2400bps to 115200bps
Measurement speed: 10 times/SEC or 80 times/SEC, can be selected by parameter setting
Resolution: Display resolution is 1/100000
Nonlinear error: no more than ±0.05%F•S (10 times/s)
Power supply: DC power supply 12 ~ 30VDC, with anti-reverse protection