Showing 5365–5376 of 7115 results
¥ 5,204.00
Parameters and Specifications
Model : DSQC679 3HAC028357-001
Brand : ABB
Type : Robot Teaching Pendant
Function : Programming and Control for ABB Robot Systems
Programmable Memory Capacity : As per manufacturer specifications (not explicitly stated)
Data Capacity : As per manufacturer specifications (not explicitly stated)
Operating Voltage : 38V1 or 220V2 (depending on source)
Processing Speed : 220μs1
Output Frequency : 24Hz1
I/O Points : 201
LD Instruction Processor : Hard PLC1
¥ 6,235.00
Parameters
Ethernet Standard : 10/100BaseT1
Transmission Rate : Up to 100Mbps1
Interface : RJ451
Operating Temperature : -20°C to +60°C1 2
Protection Level : IP651
Specifications
Module Size : 192mm x 112mm x 40mm1 3
Weight : 1kg1
Installation Method : Panel Mount1
¥ 6,235.00
Parameters and Specifications :
Model : 3BDH000741R1
Brand : ABB
Material : Aluminum Alloy
Operating Voltage : 24V DC
Power : 5W
Temperature Range : -40℃ to 85℃
Protection Level : IP65
Measurement Accuracy : High (Advanced Voltage Measurement Technology)1 2 3
Measurement Range : Wide, Adaptable to Different Voltage Signals2 3
¥ 3,650.00
Parameters and Specifications :
Voltage : 220V1
Output Frequency : 62kHz3
Accuracy : 0.2-0.52 3
Range : 130-2102 3
Control Processor : 100系列FBM4
Block Processing Cycle (BPC) : 0.05, 0.1, 0.2, 0.5, 0.6, 1, 2, 5, 6, 10, 30 seconds; 1, 10, 60 minutes3
Power Consumption (Non-Fault-Tolerant Module) : 8.5 W4
Input Voltage (Redundant) : 24 V dc (typical)4
Compliance : EN61326-1:2013 A-class emission and industrial immunity level; RoHS compliant4
¥ 8,054.00
Parameters and Specifications :
Rated Voltage : DC 24~250V or AC 48~280V1
Working Frequency : 50/60Hz1
Number of Binary Inputs : 101
Number of Binary Outputs : 81
Protection Functions : Overcurrent, Short Circuit, Ground Fault, Underfrequency, Overfrequency, Undervoltage, Overvoltage, etc.1
Communication Protocols : IEC 61850, Modbus, etc
¥ 6,032.00
Parameters and Specifications :
Power Supply Voltage : 24V DC1
Rated Current : 5A1
Maximum Current : 10A1
Output Power : 120W1
Control Mode : Analog/Pulse1
Response Frequency : 500Hz1
Accuracy : ±0.05%FS1
Reliability : MTBF > 10000 hours1
¥ 6,235.00
Parameters and Specifications :
Electrical Parameters :
Bus Consumption Current : 80mA
Total Power Consumption : 3W
Rated Voltage : 24V DC
Continuous Allowable Voltage : 30V DC
Surge Voltage : 35V DC, 0.5s
Logic “0” Voltage Range : 5V DC, 1mA
Logic “1” Voltage Range : 15V DC, 1mA
Input Delay : 4.5ms
Signal Input Type : PNP/NPN, Photoelectric Isolation (Field to Logic): 500V AC, 1 minute
Allowable Leakage Current : 1mA
Cable Length (Shielded) : 500M
Cable Length (Unshielded) : 300M
¥ 4,195.00
Parameters and specifications:
Input voltage: 100-240V AC, 50/60hz.
Output voltage: 24V DC.
Maximum current: 10A.
Operating temperature: -25℃~ +70℃.
Frequency range: 47-63 Hz.
Power: Not given directly, but may be related to the operating voltage and current.
Interfaces: May include PXI interfaces for compatibility with the PXI platform.
¥ 5,632.00
Parameters and Specifications :
Brand : ABB1 2 3 4 5
Model : 3ASC25H203 1 2 3 4 5
Communication Protocols : Supports various communication protocols including Modbus, Profibus, and CANopen1
Output Type : High-performance analog output module1 6
Resolution and Quality : High resolution, low distortion, and low noise for precise and high-quality analog signal generation1 6
Sampling Rate and Memory : High sampling rate and large memory capacity for high-speed and long-duration data generation1 6
Input Voltage : 100-240V AC, 50/60Hz2
Output Voltage : 24V DC2
Maximum Current : 10A2
Operating Temperature : -25℃ to +70℃2
Frequency Range : 47-63Hz2
¥ 4,125.00
Parameters and specifications:
Voltage: 24V.
Current: 100-400AA (although this range may need to be adjusted for specific applications and configurations).
Range: 140-210.
Accuracy: 0.5-0.5.
Size: 2601050mm.
Weight:
2KG.
¥ 5,260.00
Parameters and Specifications :
Working Voltage : 220V/380V ±10% 50HZ1 .
Environmental Temperature : Operating at 0 to +55°C (Storage at -40 to +70°C)2 3 .
Protection Class : IP202 3 .
Corrosion Protection : Compliant with G32 3 .
EMC and CE Mark : Compliant with EMC Directive 2004/108/EC2 3 .
Transmission Speed : 10/100 Mbit/s (Ch1), 10 Mbit/s (Ch2) for MODBUS TCP3 .
¥ 5,210.00
Parameters and specifications:
Design features: It supports the predetermined communication rates in the standard specification, including 9.6kBit/s, 19.2kBit/s, 45.45kBit/s, 93.75k kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
Power supply and protection: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption is less than 4W, with DC1500V voltage isolation and reverse protection function.
Communication interface: The data electrical interface is a 9-pin Sub_D jack connector, and the pin definition conforms to the protocol specification of Profibus DP.