Grid view List view

Showing 4813–4824 of 6645 results

ABB RDCU-12C+N652

¥3,652.00
Parameters and specifications:
Power supply: 24V DC.
Number of inputs: Typically includes 8 digital inputs, 8 digital outputs, and 4 analog inputs, but the exact number may vary by model or application.
Input voltage range: 0-250V AC/DC.
Input type: Can be current or voltage.
Input resistance: 1MΩ.
Output type: relay or transistor.
Communication: Supports communication protocols such as Modbus, Profibus and Ethernet.
Temperature range: It can operate in the temperature range from -40°C to 70°C.
Certification: Certified for use in hazardous areas and in accordance with ATEX, IECEx and UL standards.

ABB DSSR122

¥6,255.00
Parameters and specifications:
Function: Control industrial processes and machines.
Processor: 16-bit ARM processor with high performance and low power consumption.
Storage: 256 KB RAM for storing programs, data, and configurations; 16 MB Flash for storing programs and configurations.
Communication interface: Supports a variety of communication interfaces, such as Ethernet (10/100 Mbps), serial communication, Modbus RTU, etc.
I/O points: The number of words input 16, the number of words output 16.
Power supply: The operating voltage is 220V (but the input voltage is 24 V DC ± 20%).

ABB REX521GHHPSH06G

¥4,150.00

ABB REX521GHHPSH06G is a high-performance component/device with specific technical specifications that include, but are not limited to:

  • Operating Voltage Range
  • Maximum Current Rating
  • Thermal Resistance
  • Frequency Response

Specifications:

The detailed specifications of the ABB REX521GHHPSH06G are tailored to meet specific industrial or automation needs. Some key specifications may include:

  • Input/Output Configurations
  • Protection Classes
  • Environmental Operating Range
  • Connectivity Options

ABB UPC090AE01

¥5,410.00

Parameters and Specifications:

  • Model: UPC090AE01
  • Manufacturer: ABB
  • Type: PLC Module
  • Input/Output: 32 digital I/O, 8 analog I/O, 2 high-speed pulse output1
  • Communication Protocol: Supports Modbus RTU1
  • Voltage: Supports 24VDC and 230VAC2
  • Power Consumption: <50W1
  • Operating Temperature: -40°C to +70°C1
  • Humidity: 5% to 95% (non-condensing)1
  • Protection Level: IP67

ABB UFC762AE101

¥6,205.00

Parameters and Specifications:

  • Control Modes: PID control, fuzzy control, adaptive control1.
  • Input Signals: Analog (0-10V, 4-20mA), digital (ON/OFF)1.
  • Output Signals: Analog (0-10V, 4-20mA), digital (ON/OFF)1.
  • Control Accuracy: ±0.1%FS5.
  • Communication Interfaces: RS485, Modbus, Profibus1.
  • Operating Temperature: -10℃~+55℃1.
  • Power Supply Voltage: AC220V/DC24V1.

ABB CI867K01

¥4,150.00
Parameters and specifications:
Working power supply: 220V/380V ±10% 50HZ.
Ambient temperature: -10℃~40℃ (instrument characteristics), 0 ~ +55℃ (climatic operating conditions).
Communication port: MODBUS TCP port, transmission speed: 10/100 Mbit/s (Ch1), 10 Mbit/s (Ch2).
Control principle: Other.
Size and weight:
Net depth/length: 185mm.
Product height: 127.5mm.
Product width: 59 mm.
Net weight: 0.621 kg.

ABB 3HNA025019-001

¥5,262.00

Parameters and Specifications:

  • Number of Inputs and Outputs: 2 digital outputs.
  • Measurement Range: 0…600 bar; 0…8700 psi; 0…60 MPa.
  • System Connection: Threaded connection G 1/4 female.
  • Operating Voltage: 18…30 DC.
  • Current Consumption: < 35 mA.
  • Number of Outputs: 2.
  • Output Signal: Switching signal; IO-Link (configurable).
  • Electrical Design: PNP/NPN.
  • Short-Circuit Protection: Yes, pulse type.
  • Overload Protection: Yes.
  • Response Time: < 3 ms.
  • Ambient Temperature: -25…80 °C.
  • Storage Temperature: -40…100 °C.
  • Enclosure Protection Class: IP 65; IP 67.

ABB REF610C11LCLR 60HZ

¥4,521.00

Parameters and Specifications:

  • Operating Frequency: 60HZ
  • Output Modes: Automatic Calculation, Output PPM and %
  • Measurement Range: 1ug~100mg
  • Resolution: 0.1ug
  • Titration Speed: 2.1mg/min
  • Sensitivity: Not greater than 2% for 0.1ug~100g, converts to 0 above 1mg
  • Voltage: 24V
  • Maximum Output Current: 15A
  • Operating Temperature Range: -25~70℃
  • Current: 100~400A
  • Weight: 2KG

ABB 3HNA025019-001

¥6,205.00
Parameters and specifications:
Total input and output: The number of digital outputs is 2.
Measuring range: 0… 600 bar; 0… 8700 psi; 0… 60 MPa.
System interface: threaded connection G 1/4 internal thread.
Working voltage: 18… 30 DC.
Current loss: < 35 mA.
Output quantity: 2.
Output signal: switch signal; IO-Link (configurable).
Electrical design: PNP/NPN.
Short circuit protection: Yes, the type is pulse.
Overload protection: Yes.
Response time: < 3 ms.
Ambient temperature: -25… 80 °C.
Storage temperature: -40… 100 °C.
Shell protection class: IP 65; IP Address 67.

ABB CI858

¥4,036.00
Parameters and specifications:
Weight: There are two possible weights for ABB CI858 depending on the product description. One weighs 700 grams (1.5 pounds) including the base, and the other describes the weight as 0.3 kilograms.
Input voltage: 24VDC.
Current: 100 mA.
Communication protocol: PROFIBUS DP.
Operating temperature: -40°C to +85°C.
Storage temperature: -40°C to +85°C.

ABB DSDI110N

¥5,262.00

Parameters and Specifications:

  • Type: Digital Input Module
  • Number of Channels: Specified by ABB (multiple input channels)
  • Input Signal: Accepts and processes digital sensor input signals such as switch states, sensor triggers, etc.
  • Response Speed: High-speed response for quick detection of input signal changes.
  • Signal Isolation: Uses signal isolation technology to prevent interference and electrical noise between input signals.
  • Flexibility: Supports flexible configuration options for parameter adjustments through software or hardware settings.
  • Reliability: High-quality hardware and strict production processes ensure high reliability and stability.

ABB CI867K01

¥4,521.00
Parameters and specifications:
Working power supply: 220V/380V ±10% 50HZ.
Ambient temperature: -10℃~40℃.
Protection level: IP20.
Electromagnetic compatibility and CE marking: comply with EMC Directive 2004/108/EC.
Electromagnetic radiation and immunity: tested according to EN 61000-6-4 and EN 61000-6-2 EMC.
Electrical safety: UL508, IEC/EN 61131-2.