Showing 5245–5256 of 7129 results
¥ 5,214.00
Parameters and specifications:
Model: PFTL301E-0.5KN
Brand: ABB
Rated load: 0.5 kN (112 lb)
Overload tolerance: usually 5 times the rated load
Accuracy: Not specifically mentioned, but ABB products generally have high accuracy and stability
Series:
PFTL series, especially the horizontal Mini series pillow indenter designed for the coil processing industry
¥ 5,260.00
Parameters and Specifications
Communication Protocols 1 2 .Programming Language 2 .Communication Interfaces 2 .Protection Rating 2 .Operating Temperature 2 .
Dimensions and Weight
Dimensions
¥ 4,051.00
Parameters and specifications:
Product model: CI532V02
Communication protocol: Support RCOM/RCOM+ communication protocol, suitable for Advant controller
Data transfer rate: High speed
Power Supply: 24 VDC
Operating temperature: 40°C to +70°C
Size: 120mm x 80mm x 40mm
Number of channels: Each interface contains two channels
RoHS Compliance: This part is exempt from certain restrictions in accordance with EU Directive 2011/65/EU(RoHS)
¥ 6,230.00
Parameters and specifications:
Make and Model: ABB, Model NAIO-03F.
System transmission accuracy: ±0.1%×F·S.
Temperature drift: ≤ 0.005%F ·S/℃ (35ppm/℃).
Input impedance: current ≤60Ω; Voltage ≥500KΩ.
The output allows external load impedance:
The output ranges from 0 to 300Ω for 4-20mA
0-10mA The output ranges from 0 to 600Ω
0(1) to 5V: ≥500 kω
0 to 10V: ≥1 Mω.
Power supply: AC 95~265V; DC DC 20 to 32V.
Input power: 0.9~1.8W.
¥ 4,152.00
Parameters and specifications:
Current input: DC current 0~10A (direct input, starting current :5mA), 0~9999A (external shunt or Hall element, range programmable setting).
Voltage input: DC voltage 0~1000V, input impedance ≥2kΩ/V.
Accuracy level: Current and voltage are 0.2.
Input voltage range: 85 VAC to 264 VAC, 90 VDC to 350 VDC.
Output voltage/current: Output voltage – Channel 1: 24.7VDC, output current – Channel 1: 20A.
Power consumption: ≤1mW.
Insulation resistance: ≥100MΩ.
Power frequency withstand voltage: 3kV/1min(RMS) between the power terminal group and the signal input and output terminal group.
Average trouble-free working time: ≥50000h.
¥ 3,205.00
Parameters and Specifications
Model Control Principle Processor Memory Connections Operating Temperature Power Supply
¥ 4,120.00
Parameters and specifications:
Model: 3HAC025338-006
Application: Mainly used for servo control in ABB IRC5 control cabinet
Power: Large power, payload between 150 and 500kg (up to 650kg when “no wrist”)
Size: 430260145mm (weight 10.7kg)
Adjusting parameters: including the proportional gain of position loop regulator, the proportional gain of velocity, the time constant of velocity integration, the filter factor of velocity feedback, etc
¥ 5,211.00
Parameters and specifications:
Model: ABB DSTA180
Use: May be used as a control motherboard or control module with specific functions and technical specifications to meet the control and monitoring needs in industrial environments.
Technical specifications: 16-bit or 32-bit analog processing may be supported, depending on the specific configuration and application requirements.
¥ 5,412.00
Parameters and specifications:
Brand: ABB
Model: UGTMM-01SB47SR
Voltage: 24V
Current: 100-400A (Note: this may be a range of parameters related to this module, not directly to UGTMM-01SB47SR)
Weight: 2KG
Packing: good
Delivery time: Stock
Communication interface: HDMI interface
Operating temperature: 60 (may be the operating temperature range or a specific value, specific need to refer to the product manual)
Alarm type: Light alarm
¥ 4,621.00
Parameters and specifications:
Input voltage: 24V DC or 48V DC.
Output voltage: 24V DC.
Output current: 8A.
Power: 192W.
Operating temperature: -40°C to +70°C.
Storage temperature: -40°C to +85°C.
Protection level: IP67.
Size and weight:
Dimensions: 110 mm x 60 mm x 28 mm.
Weight: 0.5kg.
¥ 4,184.00
Parameters and specifications:
Input voltage: 24 V DC ± 20%.
Input current: up to 5 mA or 0.5 A, specific values may vary depending on usage.
Number of words entered: 16.
Number of words output: 16.
Input type: single-ended and differential.
Output type: Relay.
Baud rate: 12 Mbit/s (for PROFIBUS DP communication).
Maximum number of connected slaves: When used as the CI854 controller interface of the PROFIBUS master device, a CI854 can connect up to 124 slaves.
¥ 6,251.00
Parameters and specifications:
Model: REF615D
Brand: ABB
Function: Feeder protection measurement and control device, suitable for the protection, control, measurement and monitoring of public substations and industrial distribution systems.
Applicable power network: It can be adapted to the neutral point ungrounded power network, and can also be adapted to the neutral point resistance or impedance grounded power network.
Protection capability: Provides directional/non-directional overcurrent protection, thermal overload protection, and directional and non-directional ground protection for feeders.
