SCYC55830
¥2,415.00Parameters and specifications:
Input voltage range: AC 100-240V.
Output voltage range: DC 24V.
Maximum output current: 5A.
Operating temperature range: -10°C to +50°C.
Size and weight:
Dimensions: 170mm x 105mm x 32mm.
Input voltage range: AC 100-240V.
Output voltage range: DC 24V.
Maximum output current: 5A.
Operating temperature range: -10°C to +50°C.
Dimensions: 170mm x 105mm x 32mm.
Order number: 3BUA000037R1.
System function: powerful, suitable for wind power, hydropower, nuclear power and other applications.
I/O count: 12 input /8 output.
Output frequency: 50Hz.
Working voltage: 220V.
Output frequency: 8kHz.
Program capacity: Large capacity.
Size: Specific size information may vary from batch to batch and region to region, but in general, its width is 60mm.
Weight: About 0.24kg.
Model: CI865K01.
Product Number: 3BSE040795R1.
Processing power: I/O scans for up to 31 distributed I/O systems can be handled.
Compatibility: Acts as a Satt ControlNet communication interface for AC 800M systems, bridging different bus standards used on AC 800M and Satt ControlNet. However, it cannot be used as a general ControlNet interface and cannot be used with high integrity controllers.
Height: Approx. 185mm (7.3 in).
Width: Approximately 59mm (2.3 in).
Depth: Approximately 127.5mm (5.0 in).
Weight: Depending on the data, the weight may vary. One says it’s about 0.7 kg (1.5 pounds), another says it’s about 0.28 kg (0.62 pounds). The exact weight may vary by batch and configuration.
Model: CI857K01.
Product Number: 3BSE018144R1.
Operating voltage: usually 380V.
Output voltage range: 0 ~ 15V, continuous adjustment.
Output current range: 0-180A, can be adjusted continuously.
Load properties: pure resistance.
Model: CI858K01.
Product Number: 3BSE018135R1.
Input voltage: 24VDC.
Current: 100mA.
Communication protocol: Support PROFIBUS DP protocol, may also support a variety of communication interfaces, such as Ethernet, serial port, CAN bus, etc., to achieve data communication with other devices or upper system.
Operating temperature: range -40°C to +85°C.
Model: PM861AK01.
Order number: 3BSE018157R1.
Input voltage range: Usually 12-48VDC.
Output voltage range: 5VDC.
Output current: Max. 10A.
Efficiency: greater than 90%.
Dimensions: Length 170mm, width 105mm, height 32mm. It is also mentioned that its size is 23cm long, which may be due to the size difference between different batches or different applications, it is recommended to refer to the official documentation for the most accurate information.
Processor: A 16-bit ARM processor with high performance and low power consumption.
Memory: Equipped with 256 KB of RAM for storing programs, data, and configuration; And 16 MB Flash for storing programs and configurations.
Communication interface: 10/100 Mbps Ethernet interface, support Modbus RTU protocol, can communicate with other devices.
Dimensions: The net depth/length of the product is 238.5mm, the net height of the product is 72mm, the net width of the product is 162mm.
Weight: The net weight is 2.35kg.
Data transmission capability: Support high-speed data transmission to meet the needs of real-time control.
Communication protocols: Support a variety of communication protocols, such as Ethernet/IP, Modbus TCP/IP, etc., to facilitate connection with other devices and systems.
Operating voltage range: It has a wide operating voltage range and can work normally under different voltage conditions.
High-speed data processing: Supports high-speed data transmission and communication, ensuring stability and accuracy in applications with high real-time requirements.
Current and voltage: Rated current is 5A, rated voltage is 220V, resistance is 5 ohms.
Torque: Rated torque up to 680,000 lb-in.
Output frequency: 230.
Size: Specific size information is not available at this time, but please note that the device comes in 15 case sizes ranging from 0.16 to 200 HP.
Measuring range: 0… 600 bar, 0… 8700 psi, 0… 60 MPa.
System interface: threaded connection G 1/4 internal thread.
Working voltage: 18… 30 DC V.
Output quantity: 2.
Output signal: switching signal, IO-Link (configurable).
Electrical design: PNP/NPN.
Switching output DC voltage drop Maximum: 2.5V.
Continuous current load of switching output DC: 150 mA (200 mA @ 60 °C); 250 mA @ 40 °C.
Short circuit protection: Yes, the type is pulse.
Overload protection: Yes.
Response time: < 3 ms.
Ambient temperature: -25… 80 °C.
Storage temperature: -40… 100 °C.
Shell protection level: IP 65, IP 67.
Model Number: 500BIO01 1MRB150005R1/J
Type: DCS PLC Module
Manufacturer: ABB
Input Voltage: X volts
Output Voltage: Y volts
Communication Ports: Z ports
Operating Temperature: -10°C to 60°C
Dimensions: L x W x H mm
Model: 500CIM05 1MRB150077R1/B
Type: Field Control Module (FCM)
Compatibility: ABB 800xA DCS
Input Channels: 16 digital input channels
Input Voltage: 24 VDC
Input Signal Type: Digital
Enclosure: DIN rail mounted
Operating Temperature: -25°C to 60°C
Communication: Profibus DP communication protocol