Interface Type: The CI854A typically has a variety of communication interfaces for data transmission and communication with other control devices, sensors, and actuators.
Features:
High performance: The CI854A module usually has a high performance processor and communication capabilities, which can quickly respond to control instructions and achieve efficient data transmission.
High stability: The module has excellent stability and reliability, can run stably for a long time, reduce the failure rate and improve production efficiency.
Supports 9-pin Sub_D jack connectors, which comply with the Profibus DP protocol specification.
The communication rate supports various options, such as 9.6kBit/s, 187.5kBit/s, and 1.5MBit/s.
The rate setting can be identified automatically or set with a dip switch.
With signal delay function, delay time ≤11Bit.
The lightning protection capability reaches 4000V, while providing 1.5A overcurrent protection and 600W surge protection.
Model: 3BHE024577R0101.
Input voltage: DC 24V.
Power consumption: About 4.5 watts Max.
Input/output signals: digital or analog signals are supported.
Operating temperature: -40℃ to +70℃.
Protection level: IP20.
Input type: Support AC or DC input, AC voltage range is 85~264 VAC, DC voltage range is 90V~350V.
Output power: 500W.
Output voltage and current: Depending on the channel, for example, the output voltage of channel 1 is 24.7VDC and the output current is 20A.
Accuracy level: The accuracy level of current and voltage is 0.2.
Other parameters: Insulation resistance ≥100MΩ, power frequency voltage tolerance is 3kV/1min(RMS) between the power terminal group and the signal input and output terminal group, the average trouse-free working time is ≥50000h.
Operating Temperature: 0 to 55°C
Storage Temperature: -20 to 70°C
Input Voltage: 24VDC
Dimensions: (H x W x D) 213 x 318 x 60 mm
Weight: 1.5 kg
Protection Rating: IP65
Communication interface: The CI867K01 module supports MODBUS TCP communication interface and provides 10/100 Mbit/s (Ch1) and 10 Mbit/s (Ch2) transmission speeds.
Electrical parameters: It has an RJ-45 female (8-pin) connector, operating temperature range from 0°C to +55°C (storage temperature from -40°C to +70°C), and protection rating of IP20.
Size and weight:
Dimensions: The module measures approximately 170mm x 105mm x 32mm.
Processor: The module uses a high-performance processor to ensure fast and accurate control responses.
Data bus size: The size of the data bus determines the amount of data that can be retrieved in a cycle. For the 8085 microprocessor, the size of the data bus is 8 bits, while for the 8086 microprocessor, it is 16 bits.
Address bus size: The address bus size of the 8085 microprocessor is 16 bits, while the address bus size of the 8086 microprocessor is 20 bits.
Memory addressing capacity: The memory addressing capacity of the 8085 microprocessor is 2^16, or 64 KB, while the memory addressing capacity of the 8086 microprocessor is 2^20, or 1 MB.
Operating frequency: The 8086 microprocessor operates at 5 MHz, while the advanced version can operate at 8-10 MHz. In contrast, the 8085 microprocessor operates at a relatively low frequency.
I/O channels: The module supports up to 32 digital input channels and up to 32 digital output channels, each of which can be individually programmed to meet the specific requirements of the application. In addition, it supports up to 16 analog input channels and up to 8 analog output channels in the range of -10VDC to +10VDC, 0-20mA, or 4-20mA.
Size and weight:
Dimensions: Approximately 6.0″ x 4.0″ x 6.0″ (15.2 cm x 10.2 cm x 15.2 cm).
Weight: Approximately 1 lbs 1.0 oz (0.5kg).
Brand: ABB.
Model: GJR5253000R4270 07KT97 H3.
Voltage and current: Specifications provided by some suppliers refer to voltage and current as 20V and 20A respectively.
Operating voltage: Some product descriptions mention that the operating voltage is 220V.
Output frequency: Some product descriptions mention an output frequency of 20kHz.
The module is used to receive and process analog signals, such as voltage, current, temperature, etc., and convert them into digital signals for system use. It uses high-precision analog circuits and precision signal processing technology to ensure signal quality and reliability.
Analog input channels: There are multiple analog input channels that can be configured and adjusted independently to meet different application requirements.
Voltage and current range: Collector voltage range is 50mV~500V, collector current range is 10μA~2A. In a specific voltage range, there is a corresponding current range.
Error range: collector voltage, current, step voltage, current and other errors are not more than 10%.
