Grid view List view

Showing 5257–5268 of 6978 results

ABB REF610C11LCLR

¥5,260.00

Parameters and Specifications:

  • Model: REF610C11LCLR
  • Voltage: Likely 24V DC (specific voltage range may vary)
  • Current Range: Specified for motor protection (exact range may vary)
  • Operating Temperature Range: -25°C to 70°C
  • Sensitivity: Specified for motor protection and metering applications
  • Other Parameters: Depending on the specific application and configuration, other parameters may be applicable (e.g., measurement accuracy, response time, etc.)

ABB REF610C11LCLR

¥5,262.00

Parameters and Specifications:

  • Model: REF610C11LCLR
  • Frequency: 60HZ1
  • Voltage: 24V23
  • Maximum Output Current: 15A23
  • Operating Temperature Range: -25~70℃23
  • Current Range: 100~400A23
  • Resolution: 0.1ug23
  • Measurement Range: 1ug~100mg57
  • Sensitivity: 0.1ug~100g (not more than 2% error, above 1mg converted to 0)2
  • Titration Speed: 2.1mg/min23

ABB 3HAC17484-9

¥6,201.00

Parameters and Specifications:

  • Model: 3HAC17484-9
  • Brand: ABB
  • Control Principle: Other (may be specific to servo motor applications)
  • Input Signal: Synchronous Serial SSI Signal (for single-turn, multi-turn encoders, linear sensors 10-26 bits)
  • Operating Voltage: 220VAC
  • Output:
    • 4-20mA analog output with 12-bit D/A precision
    • RS485 full digital output with built-in communication protocol (customer-specific protocols available)
    • Type T4: 4 preset position switches
    • Type T8: 8 preset position switches
  • Environmental Conditions:
    • Temperature: -10°C to 60°C
    • Relative Humidity: <90%
  • Display: 6-digit digital display with adjustable decimal point position

ABB IPS21-35AD

¥5,265.00

Parameters and Specifications:

  • Connector Type: Fieldbus connector type on upper arm 053 card bus R3. CANBUS 5-pin “mini” female contact with 7/8-16 UN-2A THD female connection thread. Requires rotation1.
  • Design and Interoperability: Meets the requirements of ANSI/B93.55M-1981 for design and interoperability2.
  • Cable Connection: Connects to the cabinet (cable length) cable1.
  • Current Rating: For current connections on the manipulator base and upper arm housing1.

ABB CI858

¥5,262.00

Parameters and Specifications:

  • Input Voltage: 24 V DC ± 20%12
  • Input Current: Maximum of 5 mA (for some specifications) or 100 mA (for other specifications)12
  • Number of Digital Inputs: 161
  • Number of Digital Outputs: 161
  • Input Type: Single-ended and differential1
  • Output Type: Relay1
  • Communication Protocol: PROFIBUS DP (for some models)2
  • Operating Temperature: -40°C to +85°C2
  • Storage Temperature: -40°C to +85°C2

ABB 3HAC025338-006

¥4,326.00

Parameters and Specifications:

  • Type: Network Interface Module (NIM)
  • Communication Protocol: PROFINET (May support other protocols depending on configuration)
  • Number of Ports: Typically 2 Gigabit Ethernet ports
  • Data Rate: Up to 1000 Mbps (Gigabit Ethernet)
  • Power Supply: Redundant DC power supply (Exact voltage range may vary)
  • Environmental Protection: IP30 or similar rating

Dimensions and Weight:

  • Dimensions: Approximate dimensions may vary depending on mounting hardware.

ABB 3HAC025338-006

¥6,024.00

Parameters and Specifications:

  • Supported Communication Rates: 9.6kBit/s, 19.2kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s12.
  • Electrical Interface Protection: 4000V lightning protection, 1.5A overcurrent protection, 600W surge protection12.
  • Power Supply: Dual redundant DC input (9-36V), typical DC24V, with DC1500V voltage isolation and reverse polarity protection12.
  • EMC Test Certification: Passed EMC testing and certification12.
  • IP Rating: IP3012.

Dimensions and Weight:

  • Dimensions: 430x260x145mm (10.7kg)3.
  • Weight: 10.7kg3.

ABB UFC760BE142

¥6,205.00

Parameters and Specifications:

  • Power Range: 0.75 kW to 370 kW1
  • Voltage Rating: 200 V to 690 V1
  • Control Method: Vector Control1
  • Efficiency: Up to 96%3
  • Input Voltage Range: 48 V to 650 V DC2
  • Output Current: 60.2 A2

Dimensions and Weight:

  • Dimensions: 310 mm x 170 mm x 67 mm2
  • Weight: 3.4 kg2

ABB GDB021BE

¥5,620.00

Parameters and Specifications:

  • Voltage Range: 3.3 kV – 36 kV1
  • Frequency Range: 45 Hz – 65 Hz1
  • Synchronization Accuracy: ±0.1°1
  • Overload Capacity: 2 times the rated current1
  • Communication Interfaces: RS-232, RS-485 serial ports1
  • Power Supply Voltage: 24 VDC12

Dimensions and Weight:

  • Size: 220 mm x 165 mm x 50 mm (as per [1]), or 120 mm x 80 mm x 35 mm (as per [5])
  • Weight: 1.5 kg (as per [1]), or 500 grams (as per [5])

ABB UFC760BE141

¥5,622.00
Parameters and specifications:
Brand: ABB
Specifications: Specific specifications may include voltage, current, resistance and other parameters, but the specific value is not directly given in the search results. A voltage of 220V, a current of 5A and a resistance of 5 Ohms are mentioned in some of the search results, but it is not possible to confirm whether these are directly related to ABB UFC760BE141.
Color: Black
Features: Communication module
Application fields: gas, water supply, sewage treatment, metallurgy, steel manufacturing, hydroelectric power generation, thermal power generation, paper industry, glass manufacturing and so on

ABB PM803F

¥6,520.00

Parameters and Specifications:

  • Series: ABB 800xA System Basic Unit Controller1
  • Data Bus Bandwidth: 100MB/s for fast data transmission to the CPU unit2
  • Memory: 16MB RAM for executing large-capacity control programs2
  • Communication Rates: Supports various communication rates including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75k kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s3
  • Protection: 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection3
  • Power Supply: DC9-36V wide redundant dual power supply with DC1500V power isolation and reverse connection protection3

Dimensions and Weight:

  • The exact dimensions and weight are not provided in the search results.

ABB UNITROL 1010

¥5,240.00

Parameters and Specifications:

  • Rated Excitation Current: 10 ADC12
  • Rated Voltage: 350 VDC2
  • Processor: 32-bit RISC processor with a clock speed of up to 200 MHz3
  • I/O Points: Up to 256 points3
  • Communication Interfaces: Supports RS232, RS485, Ethernet, and other interfaces3
  • Power Supply Voltage: 24V DC3
  • Power Consumption: 20W3
  • Operating Temperature: -25°C to +70°C3
  • Storage Temperature: -40°C to +85°C3
  • Protection Level: IP673