Voltage: 24V
Current: 100-400A
Output frequency: 50HZ
Disconnect capacity: 0.01
Power range: For CD series servo drives, the power range covers 200W to 2KW
Speed adjustment range: For CD series servo drives, the speed adjustment range is 250 to 3000 RPM (depending on the power, for example 250 to 2500 RPM for 200W drives)
Size and weight
Weight: 2KG
Net weight: about 500kg
Operating torque: ≤200N.m
Mechanical life: 20000 times
dimension
Dimensions: width 700mm, height 2500mm, depth 1700mm
weight
As mentioned earlier, there are two different weight figures: about 500kg and 3 kg.
Input voltage range: 110 to 240v AC
Output voltage: 24V DC
Current: 5A
Frequency: 50/60Hz
Size and weight
Size: 200mm × 150mm × 50mm
Weight: 1.5kg
Product Model: BCU-02 3AUA0000110429
Brand: ABB
Control principle: Other
Size: 3AUA0000110429mm
Working voltage: AC220V
Input signal: SSI signal
Relay contact capacity: AC220V/3A, DC125V/3A
Working environment: dustproof place without violent vibration; Temperature: -20-45℃; Humidity: ≤90%
Input voltage: 200~250VAC, 47~63Hz
Output voltage: 24VDC
Output current: 20A
Power: 480W
Working temperature: According to different data, the range of working temperature is different. One source indicates -15 ° C to 60 ° C 2, while the other indicates -25 ° C to +70 ° C
Power supply type: Compatible with AT/ATX power supply
System memory: 8MB (or varies depending on specific configuration)
Model: ACS800-04-0210-3+P901
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function
Rated voltage: three-phase AC380-415V
Adaptive motor: mild overload 160KW
No overload application (output current/motor power) : Not directly given, but similar models ACS800-01-0100-3+P901 have a rated capacity of 75kW/55kW, an output current of 166A/155A/115A, and a motor power of 90kW
Interface type: PROFIBUS DP
PROFIBUS DP rates: 960 kbps, 1.5 Mbps, 3 Mbps
Node addresses: 0 to 31
Power supply voltage: 24 VDC
Power consumption: 5W
Operating temperature: For DSDX451, usually -20°C to +60°C; Note, however, that different sources may give different operating temperature ranges, such as 0 to 50 ° C.
Storage temperature: -40°C to +85°C
Enclosure protection class: IP20
Input voltage: 24VDC, 48VDC
Output voltage: 24VDC
Data interface: 9-pin Sub_D jack connector, supporting Profibus DP bus standard. The communication rate includes 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s and other rates
Lightning protection: With 4000V lightning protection and 1.5A overcurrent protection and 600W surge protection
Power supply and protection: dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function2.
Storage capacity: 16MB RAM
Function Description: ABB 07AC91 is an analog expansion module, with high precision and high stability, support a variety of common interface protocols, and has good anti-interference ability. The module can test three voltage levels (collector/drain voltage ≤2v, 10v, 40v±5), three current levels (collector/drain current ≤2ma, 20ma, 200ma±5) and three power levels (power ≤0.04w, 0.4w, 0.4W). 4w±10%).
Accuracy: In terms of test values, there are a variety of accuracy indicators, such as degree (static accuracy) vc/d ±(2% o.v.+3 bit), ic/d ±(2% o.v.+3 bit) and so on
Power supply voltage: 24VDC
Input current: 250mA
Output current: 500mA
CPU speed: 800MHz
Memory: 2GB
Power range (230V AC)
Continuous output power: 1.9-3.4kW
Continuous current output: 9-15 Amps
Peak current output (2.5 seconds) : 17-30 Amps
Input voltage: 380-500 VAC, three-phase, 50/60 Hz
Output voltage: 0-500 VDC
Rated current: 10 A
Peak current: 20 A
Control mode: Support speed control, torque control, position control
Communication interface: Support Modbus, Profibus, DeviceNet, CANopen and other communication protocols
Protection features: including over current protection, short circuit protection, over voltage protection, under voltage protection, over temperature protection