Input voltage: 200~250VAC, 47~63Hz
Output voltage: 24VDC
Output current: 20A
Power: 480W
Working temperature: According to different data, the range of working temperature is different. One source indicates -15 ° C to 60 ° C 2, while the other indicates -25 ° C to +70 ° C
Power supply type: Compatible with AT/ATX power supply
System memory: 8MB (or varies depending on specific configuration)
Model: ACS800-04-0210-3+P901
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function
Rated voltage: three-phase AC380-415V
Adaptive motor: mild overload 160KW
No overload application (output current/motor power) : Not directly given, but similar models ACS800-01-0100-3+P901 have a rated capacity of 75kW/55kW, an output current of 166A/155A/115A, and a motor power of 90kW
Interface type: PROFIBUS DP
PROFIBUS DP rates: 960 kbps, 1.5 Mbps, 3 Mbps
Node addresses: 0 to 31
Power supply voltage: 24 VDC
Power consumption: 5W
Operating temperature: For DSDX451, usually -20°C to +60°C; Note, however, that different sources may give different operating temperature ranges, such as 0 to 50 ° C.
Storage temperature: -40°C to +85°C
Enclosure protection class: IP20
Input voltage: 24VDC, 48VDC
Output voltage: 24VDC
Data interface: 9-pin Sub_D jack connector, supporting Profibus DP bus standard. The communication rate includes 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s and other rates
Lightning protection: With 4000V lightning protection and 1.5A overcurrent protection and 600W surge protection
Power supply and protection: dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function2.
Storage capacity: 16MB RAM
Function Description: ABB 07AC91 is an analog expansion module, with high precision and high stability, support a variety of common interface protocols, and has good anti-interference ability. The module can test three voltage levels (collector/drain voltage ≤2v, 10v, 40v±5), three current levels (collector/drain current ≤2ma, 20ma, 200ma±5) and three power levels (power ≤0.04w, 0.4w, 0.4W). 4w±10%).
Accuracy: In terms of test values, there are a variety of accuracy indicators, such as degree (static accuracy) vc/d ±(2% o.v.+3 bit), ic/d ±(2% o.v.+3 bit) and so on
Power supply voltage: 24VDC
Input current: 250mA
Output current: 500mA
CPU speed: 800MHz
Memory: 2GB
Power range (230V AC)
Continuous output power: 1.9-3.4kW
Continuous current output: 9-15 Amps
Peak current output (2.5 seconds) : 17-30 Amps
Input voltage: 380-500 VAC, three-phase, 50/60 Hz
Output voltage: 0-500 VDC
Rated current: 10 A
Peak current: 20 A
Control mode: Support speed control, torque control, position control
Communication interface: Support Modbus, Profibus, DeviceNet, CANopen and other communication protocols
Protection features: including over current protection, short circuit protection, over voltage protection, under voltage protection, over temperature protection
Technical parameters:
Input signal: thermocouple, thermal resistance, resistance, voltage, current and other types
PID control output: voltage, current, relay contact switch, SSR driver, etc
Communication transmission output: 4~20mA, 1~5V, Rs485 communication, etc
Accuracy: ±0.2%F.S±1 word, automatically compensate for temperature drift and time drift
Current output load capacity: 0~600Ω or 0~250Ω
Measurement control cycle: 0.5s
Distribution output: DC24±1V(25mA)
Input voltage: AC220V/380V±10% 50Hz±1
Output current: 0-20kA (customizable)
Output capacity: 0-200kVA
Current resistance timing range: 0-9999S
Impact timing range: 0-999mS
Ambient temperature: -20℃ to 50℃
Current accuracy: ≤1.5% (F.S)
Model: GFD233A
Origin: Switzerland
Voltage: 24V or 220V
Current: 100-400A
Weight: Approximately 2KG, or 26.
Operating temperature: 60℃
Frequency: 50/60HZ
Power: 2700
Brand: ABB
Model: CI858K01
Product Number: 3BSE018135R1
Input voltage: 24VDC
Current: 100 mA
Communication protocol: PROFIBUS DP
Operating temperature: -40°C to +85°C
Storage temperature: -40°C to +85°C
Control principle: Embedded core module based on ATMEL AT91SAM9263 processor
Number of channels: 1
Communication speed: 40000 kbit/s