Communication protocol: Support MODBUS serial /ASCII communication.
Serial port: Equipped with dual RS232 serial application ports supporting RS232/RS485 and RS422 electrical standards, the baud rate can be configured from 110 baud to 115.2 kbps.
Debugging/Configuration port: Comes with an RJ45 Ethernet port that supports 10/100 base-T transfer speeds.
Because the specific parameters and specifications may vary depending on the application and requirements, the specific parameter values are not given here. But ABB 3HAC14265-1 is usually associated with ABB’s industrial robots or automation systems.
According to the search results, ABB 3HAC14265-1 May be a robot power supply unit for ABB S4C control cabinets.
Size and weight:
The product size is 280200330mm and the weight is 5.92kg.
Features:
As a robotic power supply unit, the ABB 3HAC14265-1 is likely to have stable power supply, high reliability and easy integration into ABB’s automation systems.
Серия: gd99924be
Параметры и характеристики:
Принцип управления: другие (не уточненные)
Для использования: низковольтный источник тока, используемый в основном для испытания электроприборов на термостабильность, динамическую стабильность, испытание на термолитр, распрямление, сравнительный анализ тока, например для электроприборов, таких как прерыватели воздуха, контакторы, реле и т.д
Открытое напряжение: 4-12V
Выходной ток: 50-30000A
Рабочее время: изменяется в зависимости от тока вывода, например, когда номинальное время выхода составляет 2,5 минуты, а время выхода 1/2 — 30 минут
Processor: Based on 160 MHz, 32-bit Freescale Coldfire processor
Control algorithms: Contains more than 150 predefined control algorithms or function codes
Memory: Extended user configured memory (2 MB NVRAM)
Function block support: 30,000 function blocks are supported
I/O support: All HR series I/O, SD series I/O, and S800 I/O subsystems are supported simultaneously
Communication interface: Smart device integration via HART I/O and PROFIBUS DP V0, V1, V2, BRC410 models also integrate Modbus TCP devices via a 100 MB Ethernet port
Data Communication: Supports standard communication rates as predefined in specifications. Supports manual setting of all standard rates or rate adaptation using dip switches (with consistent rates across all electrical interfaces)1.
LED Indicators: 6 bicolor LED status indicators with power failure relay output alarm1.
Protection: 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection for electrical interfaces1.
Power Supply: DC9-36V wide redundant dual power supply, DC1500V power isolation, and reverse connection protection1.
EMC Certification: Complies with industrial-grade EMC testing standards1.
IP Rating: IP30 protection rating with corrugated aluminum reinforced enclosure and standard industrial 35mm rail mounting1.
Function: The relay has a variety of protection functions, such as overcurrent, short circuit, ground fault, underfrequency, overfrequency, undervoltage, overvoltage, etc., to ensure the reliability, safety and efficiency of the power system.
Communication capabilities: Support communication protocols, such as IEC 61850, Modbus, etc., to achieve communication with other devices and monitoring systems to achieve remote monitoring and control.
Automation function: can be used to achieve automatic reclosing, current differential protection, synchronous operation and other advanced control operations.
