PDD200A101
¥4,151.00Parameters and specifications:
Voltage: 100-240 VAC.
Current: 0-5A.
Power: 0-1200 W.
Operating temperature: -10℃~+50℃.
Size and weight:
Overall dimensions: 200mm×150mm×50mm.
Weight: 1.2 kg.
INNPM12
¥6,205.00Parameters and specifications:
Measurement parameters: It can monitor the parameters of the power system in real time, such as voltage, current, active power, reactive power, power factor, frequency, etc.
Communication interface: Supports a variety of communication protocols, such as Modbus, Profibus, Ethernet and so on.
Working conditions:
Operating temperature: -25℃ to +70℃.
Operating humidity: 10%RH to 90%RH (no condensation).
Rated voltage and current: Depending on the model, it is usually rated voltage of AC 100V to 690V, current rating of AC 1A or 5A.
Measurement accuracy: meet the relevant national standards and industry standards.
AI830
¥3,520.00Parameters and specifications:
Series: ABB series.
Function: The AI830 is usually an analog input card or module used in industrial automation control systems, especially temperature measurement.
Input type: Temperature measurement via resistance elements such as Pt100, Cu10, Ni100, Ni120 and resistors is supported.
Number of channels: There are usually 8 channels for temperature measurement.
Connection mode: Three-wire connection, all RTDs (resistance temperature detector) must be isolated from the ground.
Resolution: 14-bit resolution.
Temperature conversion: Modules perform linearization and temperature conversion to degrees Celsius or Fahrenheit.
Power frequency filter: The cycle time of the power frequency filter can be set via the MainsFreq parameter to provide a 50Hz or 60Hz notch filter.
DSQC332
¥5,265.00Parameters and specifications:
Input voltage: 24 volts DC.
Output current: 30 (although some search results mention 20, according to the latest information, the output current is 30).
Number of axes: 2.
Communication mode: Ethernet, RS-232, RS-485.
Data bus: 24-bit address bus, 16-bit data bus, support 32-bit data operation.
I/O channels: 2 8-bit dual-function I/ OS, 1 7-bit dual-function I/O, 16 to 44 analog input channels.
Clock frequency: Under 4.194MHz crystal oscillator, the system clock can reach 20.97MHz.
AI810
¥5,265.00Parameters and specifications:
Input voltage: 24V DC.
Input current: Support 0… 20 mA, 4… 20 mA, 0… 10 V or 2… 10 V.
Output voltage: 0-10V DC.
Output current: 4-20mA.
Operating temperature range: -20°C to +60°C.
Storage temperature range: -40°C to +85°C.
Protection level: IP20.
Number of channels: 8.
Resolution: 12 bits.
Fault protection function: overload protection, short circuit protection, overvoltage protection, etc.
TP867
¥4,152.00Parameters and specifications:
Series: Siemens Industrial automation product line.
Main functions: Used in data communication and control system.
Communication interface: Optical fiber communication interface, supporting optical fiber transmission technology.
Input and output functions: contains digital input and output functions for receiving and sending digital signals, supporting the processing of switching and logic control signals.
Communication protocols: Support standard industrial communication protocols, such as PROFIBUS, PROFINET, etc.
X-BASE-PLATE-18-01
¥4,265.00Parameters and specifications:
Type: Safety-related F3 AIO 8/4 01 Remote I/O module.
Input/Output: has 8 analog inputs and 4 analog outputs.
System environment: Stable.
System capability: Normal.
Operating system: HIMATRIX.
System function: Normal.
TRICONEX 3201
¥5,260.00Parameters and specifications:
Series: Safety controllers belonging to the Triconex family.
Features: Typically used for critical applications that require high availability and fault tolerance.
Features: Possible triple modular redundancy (TMR) architecture to ensure continuous operation in the event of module failure.
System environment: Stable.
System capability: Normal.
Operating system: DCS/PLC system.
System function: Normal.
MPC240-64
¥6,205.00Parameters and specifications:
Processor: 64-bit.
Clock frequency: 240 MHz.
Memory: May include 128 MB RAM and 256 MB flash memory (but note that this depends on the specific application scenario and version).
Ethernet: 10/100 basic TX is supported.
Operating temperature: -25°C to +60°C.
Power Supply: 24 V DC.
Power consumption: 5W.
RMIO-11C
¥6,235.00Parameters and specifications
Brand: ABB
Series: Part of the AC 800M series controller
Voltage: 24V
Current: 100-400A (specific configuration)
Input mode: current input
Size and weight
Dimensions: 110 x 150 x 60 mm
Weight: about 10g
SPDSO14
¥5,628.00Parameters and specifications
Model: SPDSO14
Number of channels: Supports 16 digital output channels (DO)
Type: As an analog output module, it can output a variety of analog signals, such as voltage, current, etc
Communication mode: Communicate with the controller through the ASI module to realize the transmission of input and output data
Size and weight
Product net depth/length: 73.66mm
Product height: 360.68mm
Product width: 279.4mm
RMIO-11C
¥4,158.00Parameters and specifications
Power requirements: The module requires a certain power supply to ensure its normal operation.
Voltage: Voltage is 24V.
Current: The current range is 100-400A.
Communication protocols: Support a variety of communication protocols, such as Modbus, Profibus, etc., can communicate with various industrial control systems.
Number of input/output interfaces: The module supports multiple input/output interfaces to connect to a wide range of sensors, actuators and industrial control systems.
Size and weight
Dimensions: 110 x 150 x 60 mm.
Weight: There are differences between different search results, about 10g and 2KG.