Parameters and specifications
Brand: ABB
Model: SA9923A-E
Control principle: Other
Processing customization: No
Measuring range: 100Pa–40MPa
Accuracy: ±0.04%
Long-term drift: ±0.1%/10 years
Range ratio adjustable range: within 10 times the accuracy is lossless, up to 100:1
Temperature influence: ≤±(0.05% range +0.01% range upper limit)/28℃
One-way overload pressure: up to 40MPa
Pressure type: up to 60MPa
Parameters and specifications
Data electrical interface:
The 9-pin Sub_D jack connector is adopted, and the pin definition conforms to the protocol specification of Profibus DP.
The Profibus DP bus standard is supported and communication rates are available from 9.6kBit/s to 12MBit/s.
Rate setting Supports automatic identification or DIP switch Settings.
It has 4000V lightning protection, 1.5A overcurrent protection and 600W surge protection.
Optical fiber interface:
The optical fiber wavelength supports multi-mode 850nm and 1310nm, and single-mode 1310nm and 1550nm.
The transmission fiber types include multi-mode and single-mode, and the transmission distance varies according to the fiber type.
The optical fiber port type can be SC, FC, or ST. SC optical ports are standard.
Parameters and specifications
Communication rate: Supports a variety of communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75k kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function, industrial terminal interface.
Relay alarm output: Support link fault and power fault alarm output, contact large capacity DC48V/1 A, industrial terminal interface.
Lightning protection and protection: with 4000V lightning protection and 1.5A overcurrent protection and 600W surge protection.
Installation method: Standard industrial 35mm guide rail installation method.
Parameters and specifications
Brand: ABB
Model: FI830F
Product type: FI830F Field bus module Profibus-DP V1
Features: Fieldbus communication module, compliant with the PROFIBUS-DP V1 standard (DIN 19245 Amendment 1), supports baud rates up to 12 MBd
Port: The physical port is RS485
Memory: Onboard shared memory (256 KB)
Size and weight
Weight: According to the search results, the FI830F weighs about 0.26 kg
Parameters and specifications
Brand: ABB
Model: PM861AK01
Processor: A powerful processor, possibly MPC860, that performs logical operations, data processing, and communication tasks.
Communication interface: With a variety of communication interfaces, such as Ethernet, serial port, bus, etc., used for data exchange and communication with other devices or upper systems.
Programming ability: Supports programming, usually using a specific programming language (such as the PLC programming language of the IEC 61131-3 standard) or a graphical programming interface.
Real-time operation: Support real-time operation, can respond to the input signal in real time and perform the corresponding control operation.
Multitasking: Supports multitasking capabilities, enabling the controller to execute multiple tasks and logic simultaneously.
Scalability: Support modular design, can expand different types of input and output modules according to demand.
Memory: includes RAM and Flash memory, such as 2M Flash erasable memory and 2M RAM.
Clock frequency: The clock frequency is 48 MHz.
Parameters and specifications
Brand: ABB
Product type: May be inverter control unit module or main control board
Rated voltage: 240 V
Rated speed: 12 rpm
Power supply voltage and current: According to the search results [3], there are spi interfaces and 10V/a power supply voltage and current, but it should be noted that this may be a specific configuration or application case.
Size and weight
Size:
132mm105mm52mm
4588966
Weight:
800g
0.24 KG
