Grid view List view

Showing 4213–4224 of 6645 results

3BHB005243R0105

¥6,418.00
argument
Input voltage: 24VDC
Output voltage: 4-20mA
Protection level: IP67
Operating temperature: -40℃~85℃
specification
Dimensions: 70mm x 45mm x 30mm
Weight: 100g
Material: stainless steel housing

KUC711AE 3BHB004661R0001

¥6,528.00
argument
Accuracy: 0.2%, 0.5%
Power consumption: ≤3VA
Job stability: annual change < 0.2%
Power frequency withstand voltage: AC2.0kV/min.1mA
Insulation resistance: ≥ 20MΩ (DC500V)
Impulse voltage: 5kV (peak), 1.2/50μS
Response time: ≤350ms
Input range: DC0 to 5A, DC0 to 500V Optional
Overload capacity: current 2 times continuous, 20 times/SEC; Voltage 2 times continuous
Output signal: DC0~5V, 1~5V, 0~20mA, 4~20mA, etc
Load resistance: current output RL≤600Ω; Voltage output RL≥2KΩ
Working environment: -10 ~ 50℃, 20% ~ 90% no condensation
Storage environment: -40 ~ 70℃, 20% ~ 95% no condensation
specification
Implementation standard: QB/441600 17 079-2001
Installation method: DIN(35mm) guide rail and M4 screws fixed
Dimensions: 55mm×75mm×120mm
Size and weight
Size: 55mm×75mm×120mm
Weight: May be 2KG or 1KG depending on the source

PFTL101A 0.5KN

¥6,252.00

argument
Model: PFTL101A 0.5KN
Measuring range: 0.5KN (i.e. 500 Newtons)
Accuracy: High precision measurement, simulation accuracy up to ±0.03%
Interface: Analog input/output interface
Supply voltage: for example, +24V/2A (may vary by application)
specification
Type: load cell
Series: PFTL series
Versions: include standard PFTL 101A/B, as well as PFTL 101AE/BE for dry areas of paper machines and PFTL 101AER/BER for wet ends of paper machines
dimension
Size: 20011050mm in one description
weight
Weight: Approximately 2KG
series
Belonging to the PFTL series, the sensors are available in a variety of models and versions for different industrial environments and application needs

PFSK151

¥6,520.00
argument
Model: PFSK151 3BSE018876R1 (Some information may vary according to the specific model)
Input voltage: 24 VDC (for some applications)
Current: May vary depending on the application, such as 100-400A (data under certain conditions)
specification
Communication interface: Support a variety of communication interfaces, such as Ethernet, serial communication (such as RS232/485)
Programming language: Supports a variety of programming languages, such as C/C++, Ladder Logic, etc., allowing users to write custom control programs
Memory: With sufficient computing and storage capabilities, such as flash EPROM program memory that supports 8K steps and 8K word data storage
Power options: Two 24VDC power options are available to power the PLC itself or other external devices
Size and weight
Size:
100 mm x 70 mm x 30 mm in one description (for ABB PFSK151 digital input module)
Another description mentions dimensions of 250×190×180mm³ (may be for specific configurations or different models)
Weight:
0.5kg (for ABB PFSK151 digital input module)
2KG

PP845 3BSE042235R1

¥5,624.00
argument
Model: PP845 3BSE042235R1
Power requirements: Usually operate in a specific power range, such as 24Vdc/120Vac, and may include other voltage options, refer to the product specification manual.
Communication interfaces: Interfaces that communicate with ABB systems, which may include Ethernet, serial interfaces, etc., for configuring and monitoring modules. In some cases, the HDMI interface may also be mentioned, but this may be a specific version or a false positive, and it is recommended to follow the official documentation.
specification
Product Type: Digital input/output module
Features: Provides programmable digital input and output functions for connecting and controlling external devices.

3BSE004160R1 PFTL101A

¥6,425.00

argument
Model: PFTL101A-0.5kN
Product ID: 3BSE004160R1
Rated voltage: +24V/2A
Input voltage range: 90-305VAC
Power range: 60, 80W, 100W, 120W, 150W, 180W, 200W
Output voltage range: 15-428V
specification
Product type: Piezomagnetic tension sensor
Design Purpose: Designed for metal handling lines, suitable for applications requiring a wide tension range and high running speed
Application environment: Standard PFTL 101A/B is usually used for conventional metal processing lines, and rolling PFTL 101AE/BE is recommended for emulsion environments

PM511V08

¥6,254.00
argument
CPU: Motorola 68040, the main frequency is 25MHz.
Memory: 8MB of dynamic RAM with ECC PCMCIA slots, such as Simm2 PCE, for increased processing power and data storage.
Expansion slot: One PCMCIA card slot for multiple functions.
Communication interface: RS-232, RS-485.
Operating temperature: -20℃~+60℃.
specification
Designed use: Used to perform various processing tasks in industrial automation systems.
Supports network types: Multiple network types and provides the necessary data and functions for communication devices through the Device Type Manager (DTM).
Accuracy and stability: Using linear photoelectric isolation principle, with high precision and good stability.
Size and weight
Size:
220mm x 80mm x 35mm
It was also stated to be 23.4 cm x 1.8cm x 10.8cm
Weight:
0.76 kg
Some say it’s 2KG

3BDH000320R0101

¥6,528.00

argument
Supply voltage: 24 V DC (+-20%).
Operating voltage: 24 VV (Note: VV here may be miswritten or repeated V, the actual should be 24 V).
Input voltage: 24 VV (again, VV may be a misrepresentation of V).
Memory expansion capacity: 128 MB (GB miswrite or duplicate, should be MB).
System memory: 8 MB (GB miswrite or duplicate, should be MB).
Operating temperature: It varies in different data, there are references to 60 ° C, and there are references to -40 to 100 ° C, which may refer to the operating temperature range under different working environments.
Storage temperature: In the range of -20°C to 75°C (or -10 to 15°F, but usually expressed in Celsius).
specification
Type: Module.
Model: 3BDH000320R0101.
Communication interface: Support Ethernet /IP protocol, provide HDMI interface.
Number of USB ports: 2 ports
Memory card slots: 2.

5SHY35L4520

¥4,528.00

argument
Rated voltage: The rated voltage mentioned in different data varies. One is 6500 V (for the ABB AC10272001R0101 model), the other is 4500 V (as an asymmetric thyristor IGCT).
Rated current: Depending on the model and application, the rated current also varies. For example, the ABB AC10272001R0101 model is rated at 1000 A, while the asymmetric thyristor IGCT may be rated at 4000 A.
Other electrical parameters: such as switching loss, conduction loss, switching frequency, etc., these parameters depend on the specific model and use.
specification
Size: According to the data, the size of ABB AC10272001R0101 model is 300 mm in length, 250 mm in width and 150 mm in height. The dimensions mentioned in other materials may vary, such as a level 1 package length of 439 mm, a height of 41 mm (may be related to packaging or different models).
Weight: The ABB AC10272001R0101 model weighs 15 kg, while the weight mentioned in other information may be lighter, such as 2.9 kg

CI871K01

¥6,025.00

argument
Communication protocol: Support PROFINET IO communication protocol, which is an Ethernet communication protocol widely used in industrial automation.
Communication speed: CH1 communication speed is supported and can be selected between 10 Mbps and 100 Mbps, these speeds are defined in the IEEE 802.3u 10/100 Base-Tx standard.
Power and power consumption: 24VDC power is received through the CEX bus and its current consumption is up to 250 mA. Under typical operating conditions, the power consumption is 3.8W and the maximum power consumption is 6W.
specification
Part number: 3BSE056797R1, there are also references to 3BSE056767R1.
Connector: RJ-45 female (8 pins).
Hot swap: Supported.
Size and weight
Dimensions: 59 x 185 x 127.5 mm (2.9 x 7.3 x 5.0 inches). However, in another search result, the size is mentioned as 100mm x 50mm x 20mm, which may refer to the size under different models or configurations, or there is an information error.
Weight: 500g (700g with packaging), there are also references to the weight of 2KG, which may be due to differences in packaging or configuration.

PM862K01

¥4,109.00

argument
Product Number: 3BSE076940R1
Clock frequency: 67 Mhz
Memory: 32 MB RAM, of which 23.521 MB is available for applications
Processor type: MPC866
Power Supply: 24V DC (19.2-30V DC)
specification
Functions: data acquisition, arithmetic processing, real-time monitoring, control and adjustment
Performance: 1000 Boolean operation 0.18 ms
Scalability: Supports CPU redundancy for higher availability (CPU, CEX bus, communication interface, and S800 I/O)
Size and weight
Size: Approximately 18.6 cm x 11.9 cm x 13.5 cm (H x W x D)
Weight: 1.1 kg (net weight of product), shipping weight is 2 kg

PM511V16 3BSE011181R1

¥6,032.00
argument
Communication rate: Supports a variety of rates from 2400bps to 115200bps.
Measurement speed: Optional 10 times/second or 80 times/second.
Nonlinear error: no more than ±0.05%F•S under the condition of 10 times/s.
Display resolution: 1/100000.
Sensor power supply: 5V±2%, 25mA(MAX).
Dc power supply: 12 ~ 30VDC, with anti-reverse protection.
specification
Brand: ABB.
Product type: Processor module.
Functional modules: May come with Express modules to meet the requirements of specific industrial and creasing applications.
Compatibility protocol: Compatible with picmg express r 2.1 and Type 10 in a variety of colors, up to 4GB ECC RAM and up to 32GB EMM.