Grid view List view

Showing 25–36 of 6645 results

ABB SR511 3BSE000863R0001

¥999.00

Product Parameters

Parameter Category Specific Specifications
Brand & Model ABB SR511 3BSE000863R0001
Compatible System ABB AC 800M, ABB Safe Control Builder, ABB Compact Control Builder
Operating Voltage 24VDC ±10%
Operating Temperature Range -25°C to 70°C
Safety Input Channels 6 Safety Inputs (Dual-Channel Configurable for Redundancy)
Safety Output Channels 4 Safety Outputs (2NO/2NC, Configurable)
Safety Integrity Level (SIL) SIL 3 (per IEC 61508), PL e (per EN ISO 13849-1)
Response Time ≤10ms (Safety Interlock Trigger)
Communication Protocols Profinet, Modbus TCP, ABB Safety over Ethernet
Power Consumption ≤9W (Typical Load); ≤12W (Max Load)
Physical Dimensions 102mm × 80mm × 60mm (L×W×H)
Protection Level IP20 (Panel-Mounted)
Mean Time Between Failures (MTBF) ≥180,000 Hours
Certifications CE, UL 508S, IEC 61508, EN ISO 13849-1, ISO 9001
Terminal Type Spring-Clamp Terminals (0.5-2.5mm² Wire Gauge)
Fault Detection Built-in short-circuit, cross-circuit, and channel-fault monitoring

ABB SR511 3BSE000863R1

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model ABB SR511 3BSE000863R1
Operating Voltage 24V DC (±15% voltage tolerance)
Operating Temperature Range -25°C to +70°C
Safety Function Type Emergency stop control, safety door monitoring, two-hand control, speed monitoring
Safety Category EN ISO 13849-1 Category 4, PL e
Safety Input Channels 4 dual-channel safety inputs (for redundant signal verification)
Safety Output Channels 3 normally closed (NC) safety relay outputs, 1 auxiliary normally open (NO) output
Output Current Capacity 6A per safety output channel (AC/DC compatible)
Response Time ≤ 10ms (safety circuit shutdown)
Communication Protocols Modbus RTU, PROFINET, ABB Safety Network Protocol
Communication Interface 1 Ethernet port (RJ45), 1 RS-485 port
Power Consumption Maximum 11W under full load
Physical Dimensions 120mm × 85mm × 60mm (L × W × H)
Protection Level IP20 (for control cabinet installation)
MTBF (Mean Time Between Failures) ≥ 200,000 hours
Certifications EN ISO 13849-1, IEC 61508, UL 508, CE, RoHS compliant

ABB SPSED01

¥999.00

Product Parameters

Parameter Category Specific Specifications
Brand & Model ABB SPSED01
Compatible System ABB AC 800M, ABB Compact Control Builder
Operating Voltage 24VDC ±10%
Operating Temperature Range -25°C to 70°C
Digital Output Channels 8 Channels (Sourcing/Sinking Configurable)
Maximum Output Current per Channel 2A
Total Output Current (All Channels) 8A
Response Time ≤1ms (On/Off)
Communication Protocols Profinet, Modbus TCP, Ethernet/IP
Power Consumption ≤6W (Typical Load); ≤9W (Max Load)
Physical Dimensions 95mm × 76mm × 58mm (L×W×H)
Protection Level IP20 (Panel-Mounted)
Mean Time Between Failures (MTBF) ≥160,000 Hours
Certifications CE, UL 508, IEC 61131-2, ISO 9001
Terminal Type Spring-Clamp Terminals (0.5-2.5mm² Wire Gauge)
Fault Protection Built-in short-circuit, overcurrent, and overvoltage protection

ABB SPIPT800

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model ABB SPIPT800
Operating Voltage 24V DC (±15% voltage tolerance)
Operating Temperature Range -25°C to +70°C
Signal Type Analog Input (AI) – universal configurable
Analog Input Channels 8 channels (each configurable for 4-20mA, 0-10V, thermocouple, RTD)
Signal Accuracy ±0.02% FS (full scale) for current/voltage; ±0.05% FS for thermocouple/RTD
Input Impedance ≥ 1MΩ (voltage input), ≤ 50Ω (current input)
Sampling Rate 100 samples/second per channel
Communication Protocols PROFINET, Ethernet/IP, Modbus TCP, ABB AC 800M native protocol
Power Consumption Maximum 10W under full load
Physical Dimensions 90mm × 80mm × 60mm (L × W × H)
Protection Level IP20 (for control cabinet installation)
MTBF (Mean Time Between Failures) ≥ 180,000 hours
Certifications IEC 61131-2, UL 508C, CE, RoHS compliant

ABB SPIIT13

¥999.00

Product Parameters

Parameter Category Specific Specifications
Brand & Model ABB SPIIT13
Compatible System ABB AC 800M, ABB Compact Control Builder
Operating Voltage 24VDC ±10%
Operating Temperature Range -25°C to 70°C
Analog Input Channels 8 Channels (Configurable for 4-20mA, 0-10V, ±5V)
Signal Conversion Precision 16-bit Resolution
Input Impedance ≥1MΩ (Voltage Input); ≤250Ω (Current Input)
Communication Protocols Profinet, Modbus TCP, Ethernet/IP
Power Consumption ≤7W (Typical Load); ≤10W (Max Load)
Physical Dimensions 98mm × 78mm × 59mm (L×W×H)
Protection Level IP20 (Panel-Mounted)
Mean Time Between Failures (MTBF) ≥150,000 Hours
Certifications CE, UL 508, IEC 61131-2, ISO 9001
Terminal Type Screw-Clamp Terminals (0.5-2.5mm² Wire Gauge)
Fault Protection Built-in overvoltage and short-circuit protection

ABB SPDSI22

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model ABB SPDSI22
Operating Voltage 24V DC (±15% voltage tolerance)
Operating Temperature Range -25°C to +70°C
Signal Type Digital Input (DI)
Digital Input Channels 22 channels (sinking/sourcing configurable)
Input Voltage Range 18V DC – 30V DC
Input Current 6mA – 10mA per channel
Response Time ≤ 1ms (standard mode), ≤ 0.1ms (fast mode)
Communication Protocols PROFINET, Ethernet/IP, Modbus TCP, ABB AC 800M native protocol
Power Consumption Maximum 12W under full load
Physical Dimensions 100mm × 80mm × 60mm (L × W × H)
Protection Level IP20 (for control cabinet installation)
MTBF (Mean Time Between Failures) ≥ 150,000 hours
Certifications IEC 61131-2, UL 508C, CE, RoHS compliant

ABB SPDSI14

¥999.00

Технические параметры

Категория параметров Конкретные характеристики
Бренд и модель ABB SPDSI14
Совместимые системы Автоматизационные системы ABB AC 800M, ABB Compact Control Builder
Рабочее напряжение 24 В постоянного тока (±10%)
Диапазон рабочих температур -25°C до +70°C
Количество цифровых входов 14 каналов (дифференциальные входы)
Тип входных сигналов DC (PNP/NPN, настраиваемые)
Время реакции входа ≤1 мс
Потребляемая мощность ≤8 Вт (типичная нагрузка); ≤12 Вт (максимальная нагрузка)
Габаритные размеры 100 мм × 80 мм × 60 мм (Д×Ш×В)
Класс защиты IP20 (монтаж на панель)
Средний наработанный ресурс до отказа (MTBF) ≥150 000 часов
Сертификации CE, UL 508, IEC 61131-2, GOST R
Тип разъемов Заземленные винтовые крепления (проводной сечением 0,5–2,5 мм²)
Тип защиты Встроенная защита от короткого замыкания и перенапряжения

ABB SPAJ140 C

¥999.00

Product Parameters

Parameter Category Specific Specifications
Brand & Model GE IS215VCMIH2BEE
Compatible System GE Mark VIe Distributed Control System
Operating Voltage 24VDC ±10%
Operating Temperature Range -40°C to 75°C
Analog Input Channels 16 Channels (Configurable for 4-20mA, 0-10V, ±5V, ±10V)
Signal Conversion Precision 16-bit Resolution
Control Logic Processing Speed 350 MIPS (Million Instructions Per Second)
Communication Protocols Profinet, Modbus TCP, Ethernet/IP, DNP3
Power Consumption ≤16W (Typical Load); ≤21W (Max Load)
Physical Dimensions 142mm × 87mm × 63mm (L×W×H)
Protection Level IP20 (Panel-Mounted)
Mean Time Between Failures (MTBF) ≥130,000 Hours
Certifications CE, UL 508, CSA C22.2, IEC 61010-1, ATEX
Terminal Type Spring-Clamp Terminals (0.5-2.5mm² Wire Gauge)
Fault Protection Built-in channel-level short-circuit, overcurrent, and overvoltage protection
Memory Capacity 256KB Flash Memory; 128KB RAM

ABB SPAJ 130 C

¥999.00

Технические параметры

Категория параметров Детали спецификации
Бренд и модель ABB SPAJ 130 C
Рабочее напряжение (питание) 110/220 В АС или 24 В ПЭ (предел допуска ±15%)
Диапазон рабочих температур -25°C до +70°C
Тип защищаемых объектов Линии распределительных сетей, трансформаторы, моторы
Основные функции защиты Защита от перегрузки, коротких замыканий (фазные, между фазой и землей), несимметричные режимы
Типы входных сигналов Токовые сигналы (5 А или 1 А), напряжностные сигналы (100 В)
Измерительные параметры Ток, напряжение, мощность (активная, реактивная, полная), энергия, коэффициент мощности
Протоколы связи IEC 61850, Modbus RTU, DNP3.0, IEC 60870-5-103
Интерфейсы связи 1 порт Ethernet (RJ45), 2 порт RS-485
Потребляемая мощность Максимум 15 Вт при полной нагрузке
Габаритные размеры 144 мм × 100 мм × 75 мм (Д × Ш × В)
Класс защиты (IP) IP40 (при монтаже в закрытые щиты)
Средний наработанный ресурс без отказов (MTBF) ≥ 150 000 часов
Сертификации IEC 60255, EN 60255, GOST R, CE, RoHS

GE IC693MDR390

¥5,299.00

Product Parameters

  1. Product Model: GE IC693MDR390
  2. Module Type: Digital I/O combination module (GE Series 90-30 compatible)
  3. Input Channels: 16 discrete digital input channels
  4. Output Channels: 16 discrete digital output channels (relay type)
  5. Input Voltage Range: 12 – 24V DC (sinking/sourcing configurable)
  6. Output Load Capacity: 2A @ 240V AC / 2A @ 30V DC per channel
  7. Input Response Time: ≤ 1ms
  8. Output Response Time: ≤ 10ms
  9. Operating Voltage: DC 5V (powered by PLC backplane)
  10. Operating Temperature Range: 0°C to 60°C
  11. Humidity Tolerance: 5% – 95% non-condensing
  12. Mechanical Dimensions: 89mm × 127mm × 76mm (length × width × height)
  13. Certifications: CE, UL listed, RoHS compliant

GE IC693MDL940L

¥5,999.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC693MDL940L
Product Series GE Series 90-30 PLC Low-Power Digital Output Modules
Output Channels 16 discrete digital output channels (fully isolated)
Output Type Low-power enhanced relay output (Form C, single-pole double-throw)
Maximum Switching Voltage 250V AC / 30V DC
Maximum Switching Current 1A per channel (resistive load), 0.5A per channel (inductive load)
Isolation Channel-to-channel & channel-to-backplane isolation (500V AC, 1 minute)
Relay Contact Life 15 million operations (at rated load, extended low-power durability)
Operating Voltage 5V DC (powered by Series 90-30 chassis backplane)
Standby Power Consumption ≤ 0.3W (ultra-low power draw in idle state)
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing)
Physical Dimensions 90mm × 127mm × 75mm (DIN rail mountable, Series 90-30 standard form factor)
Net Weight Approximately 0.48kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-2, RoHS compliant
Mean Time Between Failures (MTBF) ≥ 260,000 hours