Grid view List view

Showing 2401–2412 of 7115 results

CM772F 3BDH000368R0001

¥3,652.00

Parameters:

Module type :CM772F
Code :3BDH000368R0001
Manufacturer :ABB
Module type :A1 Profibus DP master module
Dimensions (H x W x W):75mm x 135mm x 28mm
Weight: 0.1kg

Specifications:

Interface: Standard interface for various industrial automation and control systems
Set: Includes the hardware and software required to enable communication with the Profibus DP network
Electrical characteristics: Operating voltage and other relevant electrical parameters should be in accordance with relevant standards and specifications

PM783F 3BDH000364R0001

¥3,528.00

Specifications:

Cycle: Adjustable, cycle rate adjustable, and a PLC-type cycle that runs at the maximum possible speed
Diagnostics: There is a small front display that displays status and diagnostic information
Protection: A controller lock (key lock) prevents applications and firmware from loading, thereby increasing security. The lock/unlock status is displayed on the monitor
I/O module connection: Up to 8 I/O modules can be connected, or I/O modules can be connected using MODBUS ASCII/RTU, IEC 60870-5-101 or PROFIBUS
Data exchange :I/O scans can occur as often as 2 milliseconds. Each channel is equipped with short circuit detection and deactivation

CI858K01

¥3,526.00

ABB CI858K01: indicates the parameter

Type :Embeddid core module
Manufacturer :ABB
Processor :ATMEL AT91SAM9263, ARM926EJ-S core, 200MHz frequency
Size :90mm x 96mm (PC104 architecture)
Interface :LCD, CF card, PC104 expansion, RTC, module memory

ABB CI858K01: Specification

Input voltage :24VDC
Tokyo :100mA
Communication protocol :PROFIBUS DP
Operating temperature :-40°C to +85°C
Storage temperature :-40℃~ +85℃

3HNE00313-1

¥3,526.00

ABB 3HNE00313-1: Parameter

Brand :ABB
Mode: 3HNE00313-1
What’s included :10 meters of cable and drawers
Voltage :24V DC
Power :1.4A
Weight :1.2kg
Housing material: aluminum
Protection level :IP67

PFEA112-20

¥3,526.00

ABB PFEA112-20: indicates the parameter

Manufacturer :ABB
Type: Processor module in tension control system
Voltage :220V
Output frequency :30Hz
Speed processing :15Hz
Software capacity :3MB
Storage capacity :2MB
Mode: PFEA112-20

MFE460A033BW

¥3,526.00

ABB MFE460A033BW is a software tool for programming, testing, commissioning and managing programmable logic controllers (PLCS) of the Siemens 505 and CTI 2500 series.

Parameters and specifications:

Brand :ABB.
Mode :MFE460A033BW.
Product type :PLC software package.
Supported PLC models: Siemens 505 and CTI 2500 series.
Functions: Provides all necessary tools for programming, testing, debugging and management of PLC programs.

PPC905AE101

¥3,452.00

The parameters of ABB PPC905AE101 are as follows:

Bus consumption current: 80mA
Total power consumption: 3W
Number of input points: 10
Rated voltage: 24V DC
Continuous allowable voltage: 30V DC
Surge voltage: 35V DC, 0.5s
Logic “0” voltage range: 5V DC, 1mA
Logic “1” voltage range: 15V DC, 1mA
Input delay: 4.5ms
Signal input type: PNP/NPN
Photoelectric isolation (field to logic) : 500V AC, 1 minute
Allowable leakage current: 1mA
Cable length (shielded) : 500M
Cable length (unshielded) : 300M

CI854A 3BSE030220R1

¥3,652.00

ABB CI854A 3BSE030220R1 parameters are as follows:

System configuration: Flexible, can form a variety of optical fiber networks.
Interface: Logical independent dual bus electrical interface.
Backup function: can realize the backup of electrical interface or single device access dual redundant bus system.
Connection capability: Using point-to-point network, two Profibus DP bus network segments can be connected by optical fiber; Using the optical fiber bus of the double optical port chain network, it can realize the multi-network segment Profibus DP bus connection (200).

PM783F 3BDH000364R0001

¥3,526.00

ABB’s PM783F 3BDH000364R0001 is a motor protection and monitoring device designed specifically for the industrial automation sector. The following are the main parameters of the product:

Input power: The PM783F requires the appropriate power supply to power it, usually AC power, with the specific voltage range depending on the model and configuration.
Control output: The device provides a control output function, through which other devices or actuators can be controlled, such as circuit breakers, contactors, etc.
Protection: The PM783F has a variety of protection functions, including overload protection, short circuit protection, ground fault protection, undervoltage protection and overvoltage protection to protect the motor and circuit from damage.
Monitoring function: The device can monitor the running state and parameters of the motor, such as current, voltage, power, temperature, etc., and provide fault indication and alarm output.

TB711F 3BDH000365R0001

¥3,415.00

Product parameters:

Input voltage: Usually 24V DC, but other voltage options may be available, depending on the model and configuration.
Temperature range: The set temperature range is usually between -50°C and +150°C, depending on the actual application needs.
Control accuracy: Temperature control accuracy can usually reach ±1°C or higher, depending on the model and configuration.
Output signal: Usually has an analog output (such as 4-20mA) or a digital output (such as Modbus communication) to drive an actuator or display device.
Protection level: IP level is usually higher to adapt to various industrial environments.

SD812

¥3,415.00

Product parameters:

Model: SD812
Brand: ABB
Communication interface: Supports a variety of communication protocols, such as Ethernet/IP, Profinet, Safety over EtherNet/IP, etc
Power supply: Usually 24V DC

Specifications:

Processing power: Depending on the specific hardware configuration, the SD812 may have different processing power
Communication rate: Supports high-speed communication to meet the needs of real-time control
Safety features: Compliance with relevant safety standards, such as SIL rating