Grid view List view

Showing 5137–5148 of 6978 results

ABB PFEA111-65

¥5,214.00
Parameters and specifications:
Working voltage: DC24V (18-36V).
Power: 7.5W (or 8W, depending on the quote).
Frequency: 45-65Hz.
Number of tension units: 2.
Excitation signal current: 0.5Ams, 330Hz.
Protection class: IP20 (non-sealed) and IP65 (dustproof and waterproof).
Operating temperature: +5°C to +55°C (non-operating temperature: -40°C to +70°C).
Power consumption: 250 mah +5V, 10mA +3.3V.
Input impedance: 10 kω.

ABB CI867K01

¥4,652.00
Parameters and specifications:
Protocol: Supports protocols such as Modbus TCP.
Transmission speed: 10/100 Mbit/s (Ch1), 10 Mbit/s (Ch2).
Hot swap: Supported.
Connector: RJ-45 female (8 pins).
Environmental data: Operating conditions 0 to +55°C (storage -40 to +70°C), protection class IP20, compliance with G3 corrosion protection, compliance with EMC Directive 2004/108/EC, passing EN 61000-6-4 and EN 61000-6-2 EMC tests, Comply with UL508, IEC/EN 61131-2 electrical safety standards, suitable for UL/CSA 60079-15 hazard classification sites.

ABB P-HA-RPS-32200000

¥3,418.00

Parameters and Specifications:

  • Rated Voltage: For the inverter, the rated voltage mainly includes single-phase 220~240V and three-phase 220V or 380~460V. In China, the rated voltage of low-voltage inverters is mostly three-phase 380V13.
  • Rated Frequency: Typically set to 50Hz or 60Hz, with 50Hz being the standard in China13.
  • Output Voltage: The rated output voltage is defined as the maximum value in the output voltage range since it varies with frequency. It is often equal to the rated input voltage1.
  • Output Current: The rated output current refers to the maximum current that can be output continuously, which is the main basis for users to choose an inverter3.
  • Output Capacity: The rated output capacity is determined by the product of the rated output voltage and the rated output current3.

ABB DSSR122M

¥6,205.00

Parameters and Specifications:

  • Power Supply Unit: Specified as DSSR122M Power Supply Unit3.
  • Manufacturer: ABB3.
  • Weight: 4.5 kg3.
  • Work Voltage: Standard V (exact voltage not specified)1.
  • Output Frequency: Standard kHz (exact frequency not specified)1.
  • Modular: It may be part of a modular system for easier configuration and maintenance1.

ABB PFEA112-65

¥4,128.00
Parameters and specifications:
Processor: 16 bits.
User program memory: 64 KB.
Data storage: 32 KB.
Number input: 16.
Digital output: 16.
Analog inputs: 8.
Power Supply: 24 V AC/DC.
Working voltage: DC24V (18-36V).
Power: 7.5W.
Frequency: 45-65Hz.
Number of tension units: 2.
Excitation signal current: 0.5Ams, 330Hz.
Protection level: IP20/IP65.
Operating temperature: +5-+55°C.

ABB 3BHT300032R1

¥4,526.00

Parameters and Specifications:

  • Input Voltage: 24 V DC ± 20%1
  • Input Current: Max 5 mA / Max 0.5 A1
  • Number of Channels (Input/Output): 16 each12
  • Resolution: 12-bit12
  • Output Type: Relay1
  • Output Range: 4 – 20 mA12
  • Operating Voltage: 220VAC3
  • Operating Temperature: -10…60℃3
  • Relative Humidity: <90%3

ABB PHARPS32200000

¥6,032.00
Parameters and specifications:
Input voltage: 90-264VAC.
Input current: 11.5A.
Output voltage: 24VDC.
Output current: 32A.
Power: 768W.
Operating temperature: -20℃~+70℃.
Output voltage accuracy: ±0.5% to ensure the stable operation of DCS system.
Efficiency: up to 90%, reducing energy consumption and heat production.

ABB DSAI130A

¥5,482.00
Parameters and specifications:
Power Supply and Protection:
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W.
Relay alarm output: fiber link fault and power supply fault alarm output, contact capacity: DC48V/1A.
Vibration: 0.05g RMS (20 Hz to 2,000 Hz).
Shock: 5 g (half sine wave, duration 11 ms).
Mechanical characteristics:
Dimensions: Based on the search results, there are two possible sizes. One is 132mm×105mm×52mm, and the other is 224 mm× 168 mm× 64 mm.
Case: IP30 protection grade, corrugated aluminum reinforced case.
Mounting method: 35mm DIN rail mounting.
Net weight: Depending on the search results, there are two possible weights. One is 800g and the other is 2.3kg.

ABB REM610

¥4,029.00

Parameters and Specifications:

  • Protection Functions: Includes motor overheat protection, motor start monitoring, rotor stall, phase-to-phase overcurrent, undercurrent, negative sequence protection, zero-sequence current, and circuit breaker failure protection1.
  • Communication Interfaces: REF610 has two independent communication interfaces, RS-485 or fiber optic interface. Supports protocols such as MODBUS RTU/ASCII, IEC60870-5-103, DNP3.0, and SPA1.
  • Fault Recording: REF610 has an integrated fault recorder module with four analog input channels and up to eight user-selectable switch channels for complete fault status recording1.
  • Self-Diagnosis: The self-diagnosis function can determine the relay’s condition and issue warning signals before failure1.

ABB RDCU-12C+N652

¥3,652.00
Parameters and specifications:
Power supply: 24V DC.
Number of inputs: Typically includes 8 digital inputs, 8 digital outputs, and 4 analog inputs, but the exact number may vary by model or application.
Input voltage range: 0-250V AC/DC.
Input type: Can be current or voltage.
Input resistance: 1MΩ.
Output type: relay or transistor.
Communication: Supports communication protocols such as Modbus, Profibus and Ethernet.
Temperature range: It can operate in the temperature range from -40°C to 70°C.
Certification: Certified for use in hazardous areas and in accordance with ATEX, IECEx and UL standards.

ABB DSSR122

¥6,255.00
Parameters and specifications:
Function: Control industrial processes and machines.
Processor: 16-bit ARM processor with high performance and low power consumption.
Storage: 256 KB RAM for storing programs, data, and configurations; 16 MB Flash for storing programs and configurations.
Communication interface: Supports a variety of communication interfaces, such as Ethernet (10/100 Mbps), serial communication, Modbus RTU, etc.
I/O points: The number of words input 16, the number of words output 16.
Power supply: The operating voltage is 220V (but the input voltage is 24 V DC ± 20%).

ABB REX521GHHPSH06G

¥4,150.00

ABB REX521GHHPSH06G is a high-performance component/device with specific technical specifications that include, but are not limited to:

  • Operating Voltage Range
  • Maximum Current Rating
  • Thermal Resistance
  • Frequency Response

Specifications:

The detailed specifications of the ABB REX521GHHPSH06G are tailored to meet specific industrial or automation needs. Some key specifications may include:

  • Input/Output Configurations
  • Protection Classes
  • Environmental Operating Range
  • Connectivity Options