Showing 661–672 of 7251 results
Sale!
¥ 23,999.00¥ 11,999.00
Sale!
¥ 25,999.00¥ 9,999.00
The communication module ABB 1MRK002133-ABr02 has the following technical parameters:
Device type : Module for communication between protective relays and control networks, supporting modern industrial protocols.
Communication parameters :
Supported protocols: IEC 61850 (MMS, GOOSE), Modbus TCP/IP, SNMP;
Data transfer rate: 10/100 Mbit/s (auto-negotiation);
Interfaces: 2 Ethernet ports (RJ45) with support for ring topologies;
Data buffer: 1 MB for temporary storage of event data.
Electrical characteristics :
Power supply: 24 V DC ±15% or 110/220 V DC/AC ±10%;
Power consumption: ≤15 W;
Insulation: 2 kV AC (between Ethernet interfaces and power supply, 1 minute);
Protection: ESD (Electrostatic Discharge) protection, short-circuit protection, electromagnetic interference resistance (compliant with EN 61000-4).
Mechanical parameters :
Mounting type: Plug-in module for protective relay cabinets or standalone DIN rail mounting;
Dimensions: 120 × 80 × 40 mm (width × height × depth);
Weight: ≈200 g;
Housing material: Metal with anti-corrosion coating;
Protection class: IP20 (for enclosed installations);
Operating temperature range: -25 °C to +70 °C.
Functional features :
Time synchronization: NTP (Network Time Protocol) support with 1 ms accuracy;
Diagnostics: LED indicators for network status, power, and faults;
Security: SSL/TLS encryption for data protection;
Logging: Internal memory for event recording (communication failures, updates, etc.), up to 1000 entries.
Sale!
¥ 2,699.00¥ 1,399.00
Sale!
¥ 23,999.00¥ 10,999.00
Technical parameters of
ABB 5SHY35L4503 3BHB004693R0001 3BHB004692R0002 5SXE01-0127 (detailed data in official documentation at:
ABB 311041 Product Description:
):
Sale!
Type: High-voltage grid breaker unit
Rated voltage: Up to 72.5 kV
Rated current: 2500 A (continuous), 40 kA (short-circuit interrupting current)
Operating mechanism: Spring-operated, with manual and electrical control options
Breaking time: ≤2 cycles (50 Hz)
Insulation level: LI 250 kV (lightning impulse), SI 145 kV (switching impulse)
Control voltage: 110/220 V DC
Protection features: Overcurrent, short-circuit, and earth fault protection
Communication protocols: IEC 61850, Modbus RTU
Enclosure rating: IP54 (for outdoor use)
Dimensions: 1200 × 800 × 600 mm (width × height × depth)
Weight: Approximately 500 kg
Compatibility: ABB Relion® protection relays, SCADA systems, and grid management platforms.
Sale!
The ABB GRID BREAKER UNIT GBU72 3BHB030310R0001 features parameters optimized for high-voltage grids:
Device type: Grid breaker from the GBU72 series, model 3BHB030310R0001.
Electrical parameters:
Rated voltage: 72 kV;
Rated current: 2000 A;
Maximum breaking current: 40 kA (for 3 seconds);
Insulation type: SF₆ gas insulation, with a pressure of 0.5 MPa at 20°C.
Protection and switching functions:
Switching time: ≤5 grid cycles (100 ms at 50 Hz);
Protection types: Overload, short circuit, asymmetric operation, overvoltage protection;
Condition monitoring: SF₆ pressure sensors, temperature sensors, contact condition sensors;
Control: Electromechanical with manual backup drive.
Communication and interfaces:
Protocols: IEC 61850 (for SCADA integration), Modbus RTU;
Interfaces: Ethernet (100BASE-TX), RS-485;
Status signals: Discrete outputs for transmitting faults and operating modes.
Dimensions and operating conditions:
Dimensions: 1800 mm (width) × 1200 mm (depth) × 2200 mm (height);
Enclosure protection class: IP54 (dust and water jet protection);
Temperature range: -30°C to +50°C;
SF₆ service life: ≥15 years without refilling
Sale!
Sale!
Sale!
Module type: Power monitoring module for AC500 PLC system
Measured parameters: Voltage (phase voltage, line voltage), current, frequency, active/reactive power
Measurement range: Voltage 100-480 V AC (phase), current up to 5 A (with current transformer)
Resolution: 16-bit (accuracy ±0.5% for voltage and current)
Data update time: ≤100 ms
Output signals: 2 digital outputs for alarm signals (dry contacts)
Communication protocol: AC500 internal protocol (via controller bus)
Power supply: 24 V DC (current consumption 80 mA)
Operating temperature range: 0…60 °C
Protection class: IP20 (for indoor cabinet mounting)
Dimensions: 100 × 80 × 60 mm (length × width × height)
Compatibility: ABB AC500 controllers, distribution boards, industrial electrical networks 380/220 V AC
Sale!
The ABB 1KGT011900R0001 relay module features optimized parameters tailored to industrial control needs:
Device Type : Electromagnetic relay module with auxiliary contacts;Contact Configuration :
Main contacts: 1 normally open (NO) set;
Auxiliary contacts: 1 normally closed (NC) set;
Electrical Parameters :
Coil rated voltage: 24V DC;
Main contact rated current: 30A @ 250V AC;
Insulation resistance: ≥100MΩ (at 500V DC);
Electrical lifespan: ≥100,000 cycles (under rated load);
Environmental Parameters :
Operating temperature range: -25°C to +70°C;
Storage temperature range: -40°C to +85°C;
Humidity: 5% – 95% (non-condensing);
Protection class: IP20 (suitable for cabinet mounting);
Certifications : CE, UL, IEC 61810.
Sale!
The ABB DI01 digital input module features refined specifications tailored to industrial automation requirements:
Device Type : Digital input module for integration with ABB AC500 PLCs, ABB 800xA DCS, or compatible third-party controllers;Power Supply Parameters :
Rated supply voltage: 24 V DC (direct current);
Allowable voltage fluctuation: 19.2 V DC – 28.8 V DC (compatible with standard industrial system power supplies);
Current consumption: ≤30 mA (no load on inputs) — low power draw, avoiding overload on the controller network;
Digital Input (DI) Characteristics :
Number of channels: 8 independent channels — for connecting multiple devices (position sensors, buttons, relays);
Signal type: “Dry contact” (NO — normally open / NC — normally closed) or 24 V DC energized signal;
Trigger threshold:
Minimum voltage for “OFF” signal: ≤5 V DC;
Minimum voltage for “ON” signal: ≥15 V DC;
Maximum input current per channel: ≤10 mA (overload protection against short circuits);
Response time: ≤1 ms — instant detection of status changes (critical for fault signals);
Protection and Interference Immunity :
Electrostatic Discharge (ESD) protection: IEC 61000-4-2 Class (±8 kV contact, ±15 kV air) — prevents module damage from static contact;
Surge interference protection: IEC 61000-4-4 Class (±2 kV, 5/50 ns) — stable operation against short-term voltage fluctuations in industrial networks;
Signal rejection: >60 dB — no signal distortion when operating near electric motors or transformers;
Communication Interfaces (Integration with Controllers) :
Built-in interface: Backplane (rack-mounted connection) for ABB AC500 controllers — fast communication without additional cables;
Optional interface: RS-485 (Modbus RTU) — for integration with third-party PLCs (e.g., Siemens S7-1200, Schneider M340);
Operating Conditions :
Temperature range: -25 °C to +60 °C — suitable for installation in enclosed control cabinets and moderately harsh industrial environments;
Humidity: 5% – 95% (non-condensing) — stable performance under humidity fluctuations;
Dimensions: 80 mm × 120 mm × 60 mm (height × width × depth), DIN rail mounting (EN 50022 standard) — compact design for densely packed control cabinets;
Enclosure protection class: IP20 — protection against fingers and large dust particles;
Certifications: CE (compliance with European standards), UL 61010-1 (safety for measuring equipment), IEC 61131-2 (industrial controller standards) — meets international safety norms.
Sale!
The technical parameters of the ABB 1SFB 536068D1011 (the product link will be added after you provide the official link) ensure reliable switching and safety in power circuits, as detailed below:
Function Type : Industrial power contactor, 3-pole design, electromagnetic control, for power load switching;Main Circuit Electrical Parameters :
System Type: Three-phase AC (50/60 Hz);
Rated Voltage (Ue): 400 V AC (operating voltage range: 380–420 V AC);
Rated Operating Current (Ie): 110 A (at 400 V AC, 50 Hz, power factor 0.8);
Maximum Switching Current (during switching): 660 A (peak current, duration 0.1 s);
Maximum Switching Power: 55 kW (at 400 V AC, 50 Hz);
Closed Contact Resistance: ≤0.5 mΩ (reduces power loss and contact heating);
Control Coil Parameters :
Coil Voltage Type: 230 V AC or 400 V AC (optional);
Rated Coil Power Consumption: ≤15 VA (at 230 V AC);
Coil Voltage Range: 85%–110% of rated voltage (adapts to grid voltage fluctuations to avoid misoperation);
Coil Pull-In Time: ≤100 ms (contact closing response speed);
Coil Drop-Out Time: ≤50 ms (contact opening response speed);
Structural Parameters :
Main Contact Material: AgSnO₂ silver alloy (high wear resistance, excellent arc extinguishing);
Housing Material: Plastic with flame-retardant filler (UL 94 V-0 flame rating, non-flame spreading);
Seal Material: Nitrile rubber (NBR) for dust protection;
Protection Rating: IP20 (panel mounting, protection against finger contact and large dust particles);
Environmental Adaptability :
Operating Temperature Range: -25°C to +60°C;
Relative Humidity: 5%–95% (no condensation);
Vibration Resistance: 10–55 Hz (amplitude 0.15 mm), 55–2000 Hz (acceleration 1 G);
Shock Resistance: 30 G (shock duration 11 ms);
ESD Resistance: Contact discharge ±8 kV, air discharge ±15 kV (Class 3 protection);
Installation & Dimensions :
Dimensions (W×D×H): 100×160×120 mm (compatible with DIN rails);
Mounting Type: DIN 35 mm rail mounting or screw fixing;
Product Weight: 1.8 kg (including housing, coil, and contact components);
Maximum Parallel Mounting Quantity per Rail: 4 units (on a 1-meter rail);
Certifications :
International Certifications: IEC 60947-4-1, UL 508, CSA C22.2 No. 14;
European Certifications: CE, EN 61000-6-2 (EMC), RoHS (environmental protection).
