Manufacturer :ABB
Type: Processor module in tension control system
Voltage :220V
Output frequency :30Hz
Speed processing :15Hz
Software capacity :3MB
Storage capacity :2MB
Mode: PFEA112-20
ABB MFE460A033BW is a software tool for programming, testing, commissioning and managing programmable logic controllers (PLCS) of the Siemens 505 and CTI 2500 series.
Brand :ABB.
Mode :MFE460A033BW.
Product type :PLC software package.
Supported PLC models: Siemens 505 and CTI 2500 series.
Functions: Provides all necessary tools for programming, testing, debugging and management of PLC programs.
Bus consumption current: 80mA
Total power consumption: 3W
Number of input points: 10
Rated voltage: 24V DC
Continuous allowable voltage: 30V DC
Surge voltage: 35V DC, 0.5s
Logic “0” voltage range: 5V DC, 1mA
Logic “1” voltage range: 15V DC, 1mA
Input delay: 4.5ms
Signal input type: PNP/NPN
Photoelectric isolation (field to logic) : 500V AC, 1 minute
Allowable leakage current: 1mA
Cable length (shielded) : 500M
Cable length (unshielded) : 300M
System configuration: Flexible, can form a variety of optical fiber networks.
Interface: Logical independent dual bus electrical interface.
Backup function: can realize the backup of electrical interface or single device access dual redundant bus system.
Connection capability: Using point-to-point network, two Profibus DP bus network segments can be connected by optical fiber; Using the optical fiber bus of the double optical port chain network, it can realize the multi-network segment Profibus DP bus connection (200).
Input power: The PM783F requires the appropriate power supply to power it, usually AC power, with the specific voltage range depending on the model and configuration.
Control output: The device provides a control output function, through which other devices or actuators can be controlled, such as circuit breakers, contactors, etc.
Protection: The PM783F has a variety of protection functions, including overload protection, short circuit protection, ground fault protection, undervoltage protection and overvoltage protection to protect the motor and circuit from damage.
Monitoring function: The device can monitor the running state and parameters of the motor, such as current, voltage, power, temperature, etc., and provide fault indication and alarm output.
Input voltage: Usually 24V DC, but other voltage options may be available, depending on the model and configuration.
Temperature range: The set temperature range is usually between -50°C and +150°C, depending on the actual application needs.
Control accuracy: Temperature control accuracy can usually reach ±1°C or higher, depending on the model and configuration.
Output signal: Usually has an analog output (such as 4-20mA) or a digital output (such as Modbus communication) to drive an actuator or display device.
Protection level: IP level is usually higher to adapt to various industrial environments.
Model: SD812
Brand: ABB
Communication interface: Supports a variety of communication protocols, such as Ethernet/IP, Profinet, Safety over EtherNet/IP, etc
Power supply: Usually 24V DC
Processing power: Depending on the specific hardware configuration, the SD812 may have different processing power
Communication rate: Supports high-speed communication to meet the needs of real-time control
Safety features: Compliance with relevant safety standards, such as SIL rating
Model: EI813
Brand: ABB
Communication protocols: Support a variety of Ethernet communication protocols, such as Ethernet/IP, Profinet, Modbus TCP, etc
Interface type: Ethernet interface (usually RJ45 interface)
Data transmission rate: Supports high-speed Ethernet communication and has a high data transmission rate
Installation method: Usually rail installation or panel installation
Application field:
Industrial Automation: ABB EI813 is suitable for communication and control in various industrial automation systems, such as production lines, machinery, logistics systems, etc
Model: FI830
Brand: ABB
Bus type: Supports a variety of Fieldbus protocols, such as PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, etc
Number of ports: The number of ports may vary depending on the model
Communication rate: Support a variety of communication rates to meet the requirements of different fieldbuses
Power requirements: Usually 24V DC or 110/230V AC
Industrial automation: ABB FI830 is widely used in industrial automation systems to connect and control various field devices such as sensors, actuators, PLCS, etc
Model: FI820
Brand: ABB
Bus type: Supports a variety of fieldbus protocols, such as PROFIBUS DP, PROFIBUS PA, etc
Number of ports: There may be multiple ports depending on the model
Communication rate: Support a variety of communication rates to meet the requirements of different fieldbuses
Power requirements: Usually 24V DC
Protection level: Meets the protection level of IP20 or higher to adapt to different industrial environments
Working environment: with a wide temperature range and good humidity adaptability
Model : CI871K01 3BSE056767R
: Distributed Control system (DCS)
Maximum weight : 800g
decentralized control : The control function is distributed to each subsystem to improve the reliability and flexibility of the system
centralized management : through the operation station to monitor and manage the whole system, to achieve the centralized display, record and analysis of data .
analog output channel : equipped with a plurality of analog output channels, which can output analog signals representing current, voltage, frequency,
programmability : has a programmable function that allows users to configure and adjust the output signal characteristics
Net weight : 0.133kg
Gross weight : 0.157kg
dimension : net depth 62mm, net height 76mm, net width 67.5mm; Grade 1 package length 84mm, height 72mm, width 71mm