Measuring range: Has a wide measuring range, can measure low concentration and high concentration of gas.
Accuracy: High precision measurement of various gas components, such as carbon dioxide, methane, carbon monoxide, etc.
Calibration: The automatic calibration function can automatically adjust the measurement parameters to ensure the accuracy and stability of the measurement.
Output signal: The product parameters of the analog output module include an output signal of 4-20 mA DC.
Supply voltage: The supply voltage is (9-32)V DC.
Rated output load: The rated output load is (0-600) Ω.
Input type: Support analog input, such as 4-20mA, 0-10V, etc., accuracy up to ±0.1%FS or higher.
Power supply: Usually provided by AC800PEC control system, it is also said that its input voltage is 24VDC, 48VDC, output voltage is 24VDC, voltage range is 220VDC.
Working temperature: There are two ways of saying, one is -20℃~+60℃, the other is 50~80℃. It should be noted that the operating temperature may be different in different application scenarios.
specification
MTU (Module bus Unit) : Up to 8 I/O channels with a maximum rated voltage of 250V and a maximum rated current of 3A. The MTU assigns the module bus to the I/O module and the next MTU, and generates the correct address for the I/O module by moving the output position signal to the next MTU.
Communication interface: Support communication with other devices or control systems to achieve remote monitoring and control.
Size and weight
Size: According to the search results, the PPD113B01-10-150000 product size is 100mm x 50mm x 20mm.
Weight: The weight of the product is 1.26 kg, and it is also said that its weight is 2KG.
Voltage: According to the search results, the operating voltage of 5SHX2645L0002 May be 24Vdc/120Vac, with a rated voltage of 220V, but there are also claims that its voltage is 24V.
Current: The maximum output current is 15A (one saying), or the current range is 100-400A (another saying).
Operating temperature range: -25~70℃.
Rated power: Suitable for 415/440V, 50Hz low-voltage grid, can use 50kVAr single or multiple components (25kVAr and 10kVAr).
Communication speed: CH1 communication speed is supported and can be selected between 10 Mbps and 100 Mbps, these speeds are defined in the IEEE 802.3u 10/100 Base-Tx standard.
Power Supply: 24VDC power supply is received through the CEX bus and its current consumption is up to 250 mA. Under typical operating conditions, the power consumption is 3.8W and the maximum power consumption is 6W.
Communication protocol: Support PROFINET IO communication protocol, which is a widely used in the field of industrial automation Ethernet communication protocol, can achieve efficient and stable data transmission.
specification
Protection Class: According to EN60529 and IEC 529, the module is rated IP20 (but please note that information indicates IP30), which means that it has some dust and water resistance, but it is not suitable for harsh industrial environments.
Memory: 64 MB, of which 51.389 MB is available for applications and 4 MB flash memory for firmware storage
Power supply: 24 volts DC (19.2 volts -30 volts DC)
Power consumption: At +24 V, the power consumption is 210/360 mA and the power dissipation is up to 8.6 watts
specification
Communication interface: Has two RJ45 Ethernet ports and two RJ45 serial ports, one serial port with modem control signal, the other is isolated, mainly used to connect configuration tools
Support for CPU redundancy: including CPU, CEX-Bus, communication interface, and S800 I/O for higher availability
Interface extension: Has a CompactFlash interface and other possible expansion slots for adding more functional modules
Size and weight
Size:
Dimensions for independent use: width 130mm, height 130mm, depth 190mm (insert depth <250mm after all cables are connected)
19-inch rack mounting dimensions: Front panel 3 height units (U), 21 width units (HP), total width <26 width units (HP), including heat sink insertion depth <250mm
argument
Voltage: 24VDC (input voltage)
Current: May vary depending on the application, but generally has a wide current range
Operating voltage: +5V DC, ±10%, maximum 200mA
Temperature range: +0°C to +60°C
Humidity: Maximum relative humidity up to 95% (non-condensing)
specification
Input/Output (I/O) : Typically has 8 inputs and 6 outputs, but the I/O configuration is very flexible and can be scaled up to 142 I/O points
Program storage: Flash EPROM program memory that supports 8K steps
Data storage: 8K word data storage, can store a large number of program data and configuration information
Size and weight
Size: Different sources give different size information. One way to say it is 100 mm x 70 mm x 30 mm, another way is 250 x 190 x 180mm³. This may be due to differences between different models or versions.
Weight: Depending on the source, the weight may be 0.5 kg or 2KG.
argument
Component number: IS420UCSBH4A
Manufacturer: General Electric (GE)
Country of Manufacture: USA
Microprocessor: 600MHz Intel processor with 1066MHz Intel EP80579 microprocessor for gas turbine control system
Memory: 256 MB DDR2 SDRAM
Operating system: QNX Neutrino, a real-time multitasking operating system developed specifically for industrial applications that require high speed and reliability
specification
Series: Mark VIe series
Function: UCSB controller
Communication interface: On-board IONet (Industrial Ethernet) interface to support connection and communication with other devices and systems
Input/output channels: Multiple input and output channels are capable of monitoring multiple process variables and performing related actions
argument
Speed control function: used to control the speed of DC motor, to achieve accurate operation control.
Communication interface: May have Ethernet, RS485, USB and other communication interfaces, support a variety of communication protocols, easy to integrate with the existing system.
Power input: Redundant wide voltage (12~48V DC) input, typical operating voltage is 12V/24V/48V, full load power consumption is less than 7W.
specification
Structure: modular structure.
Input/Output: has 8 digital inputs and 6 digital outputs, as well as 4 analog inputs.
